Jean-François Chatelain
Professeur
Département
Département de génie mécanique
Formation
B.Ing. (Université de Sherbrooke), M.Sc.A., Ph.D. (Polytechnique Montréal)
Bureau
A-2902
Courriel
Vue d'ensemble
Chatelain, Jean-François
Unité de recherche
Axe de recherche
- Aéronautique et aérospatiale
Expertises
- Fabrication assistée par ordinateur (FAO)
- Usinage haute performance
- Intégration en conception et fabrication assistées par ordinateur (CAO/FAO) - CAD/CAM
- Métrologie de coordonnées
- Applications en aéronautique
Prix et distinctions
2010 : Prix Hommage |Association pour le développement de la recherche et de l’innovation du Québec
Cours
Encadrements
- En codirection avec : Maranzana, Roland
Algorithme de comparaison de modèles géométriques en évolution : Une application avec CATIA V5, par Al Sabeh,Mazen
Hiver 2004 - En codirection avec : Songmene, Victor
Étude de l'influence des stratégies de coupe sur la performance de l'usinage en 5 axes par la méthode des surfaces de réponses, par Amtout,Youcef
Hiver 2004 - En codirection avec :
Utilisation des surfaces pour l'alignement et le balancement des pièces, par Ben Salah,Mohsen
Été 2005 - En codirection avec : Doré, Sylvie
Étude et validation d'une chaîne de traitements numériques sur spécimens cadavériques, par Grifo,Dino
Automne 2009 - En codirection avec : Songmene, Victor
Étude de l'influence des conditions de coupe en usinage 5 axes sur l'intégrité des surfaces par la méthode des surfaces de réponses, par Hadj Ali,Ahmed
Hiver 2005 - En codirection avec : Maranzana, Roland
Gestion de la propagation des modifications à travers des documents méthodes, par Soufi,Khaled
Hiver 2006 - En codirection avec : Mayer, René
Trajectoire de type spirale adaptative pour l'usinage haute vitesse des cavités, par Roy,Réjean
Été 2007
- En codirection avec :
Intégration des cycles d'usinage avancés des machines outils à commande numérique aux logiciels de FAO, par Boutin,Yan
Automne 2001 - En codirection avec : Rivest, Louis
Conception d'une architecture logicielle permettant le contrôle de machines-outils dans un contexte d'ouverture du contrôleur, par Fortin,Etienne
Hiver 2003 - En codirection avec : Maranzana, Roland
Maîtrise du changement dans les modèles CAO, par St-Martin,Serge
Hiver 2001
- En codirection avec :
Stagiaire ingénieur qualité, par Anquetin,Yann
Été 2020 - En codirection avec :
Chargé de projets dans l'équipe ingénierie manufacturière et innovations de Bombardier Aviation, par Bouteiller,Marc
Été 2020 - En codirection avec :
Fabrication des bateaux d'aviron de haute performance, par Teodorescu,Ana Camélia
Automne 2008 - En codirection avec :
Développement de post-processeurs et modélisation géométrique des composantes machines pour la chaîne cinématique du simulateur de machines à commandes numériques 3 axes et 5 axes, par Thibault,David
Hiver 2009 - En codirection avec :
Ingénieur de Projet pour les accessoires du nouveau moteur PW210, par Dicaire,Jean-Luc
Hiver 2009 - En codirection avec :
Ingénieur analyse performance de vol, par Lebas,Bastien
Hiver 2020 - En codirection avec :
Développement et intégration des logiciels de simulation requis dans l'élaboration d'un simulateur d'avion ou d'hélicoptère, par El Hazzaouni,Sofia
Automne 2019 - En codirection avec :
Aider au développement et à l'implantation de diverses initiatives de transformation et d'amélioration de la gestion de la flotte de moteurs de locations ainsi que la satisfaction client, par Schiavoni Pinto Seron,Carolina
Hiver 2018 - En codirection avec :
Chaîne d'approvisionnement - pièces métalliques manufacturées à Bombardier, par Saurin,Tom
Hiver 2018 - En codirection avec :
20173CAE_016, par Claveau,Marc-André
Hiver 2018 - En codirection avec :
Stage Business Analyst Pratt & Whitney Canada, par Dorion,Julien
Été 2018 - En codirection avec :
Développement en milieu critique, par Blanquet,Clément
Hiver 2019 - En codirection avec :
Spécialiste en logiciel de systèmes avions, par Medaci,Younes
Été 2018 - En codirection avec :
Rapport de stage - Pratt & Whitney Canada, par Wilson,Thomas
Hiver 2019 - En codirection avec :
Agent Méthode de gestion de changements, par Valdez Loya,Andres Gilberto
Hiver 2020 - En codirection avec :
Stage vibro-acoustique chez Bombardier, par Larroque,Robin
Hiver 2022 - En codirection avec :
Stage au département de stratégie dans l'usine de Saint-Laurent, par Dupont,Godefroy
Hiver 2023 - En codirection avec :
Conception outillage, par Montredon,Augustin
Été 2024
- En codirection avec : Botez, Ruxandra
Développement d'un simulateur de machine-outil à 3 axes, par MIHOUBI,RABAH
Été 2000 - En codirection avec :
Acquisition d’un signal associé au couple de broche en temps réel pendant l’usinage, par Younsi,Khaireddine
Été 2020 - En codirection avec :
Étude des conditions de détourage de composites CRFP, par Monier,Joseph
Été 2011 - En codirection avec :
Développement d'une interface de fixation pour la mesure de température en usinage robotisé de composites, par Ben Rais,Khedder
Été 2022
- En codirection avec :
Conception et fabrication d'une table d'usinage des polymères renforcés de fibres de carbone, par Essaghir,Youssef
Hiver 2020 - En codirection avec :
Usinage de surface des composites lin-époxy. Effet des paramètres de coupe sur le fini de surface et les forces de coupe, par Kpeglo,Yeena Komi
Hiver 2022 - En codirection avec :
Évaluation de la qualité résultante de la rétro-ingénierie de surfaces complexes à partir de nuages de points de forte densité, par Maazoul,Hatem
Automne 2009 - En codirection avec :
Analyse statique et dynamique d'une table dynamométrique pour la validation des efforts de coupe pendant l'usinage, par Bouzid,Hassen
Été 2010 - En codirection avec :
Étude du perçage orbital d'empilements de matériaux composites carbone-époxy (CFRP) et titane, par Montoya,Jose David
Été 2013 - En codirection avec :
Comportement en perçage d'un matériau composite à fibres naturelles de palmier (dattier), par Chouchene,Abdel Malek
Automne 2019 - En codirection avec :
Influence de la température de coupe en détournage sur les performances mécaniques d'un stratifié carbone/époxy, par Mullier,Guillaume
Hiver 2014 - En codirection avec : Ouellet-Plamondon, Claudiane
Étude de l'effet d'additifs sur la qualité de la coupe et les performances mécaniques d'un matériau composite, par Lasseur,Benjamin
Hiver 2017 - En codirection avec :
Développement d'application en conception avec le logiciel CATIA V6, par Margerie,Fanny
Été 2023 - En codirection avec :
Optimisation des paramètres de coupe en perçage d'aluminium pour réduire la production de bavures et améliorer le fini de surface, par Lorjuste,Jeffersongly
Été 2024 - En codirection avec :
Effect of Graphene Additive on the Coefficient of Friction of CFRP and Epoxy Materials, par Hernandez Zamora,Jose Augusto
Hiver 2023 - En codirection avec :
Effet des conditions de fraisage sur la qualité de surface des composites fibres de lin/époxy, par Chafai,Hamza
Automne 2021 - En codirection avec :
Achat et essais dans le cadre du développement d’une cellule robotisée d’usinage de composites, par Dayres,Emmanuel
Été 2021 - En codirection avec :
Conception et fabrication d'un support de caméra (IR-TCM HD 1024 RE), par Bouacha,Rachid
Hiver 2022
- En codirection avec : Joly, Mathieu
Étude des leviers industriels pouvant permettre aux avionneurs d'augmenter leurs cadences de production, par De Fromont De Bouaille,Grégoire
Été 2020 - En codirection avec :
Élaboration de propositions techniques dans le cadre d'études et de réalisations d'outillages et de machines spéciales, par Wallez,Guillaume
Été 2021 - En codirection avec :
Conception d'une nouvelle gamme de contrôleurs de pression pour la microfluidique, par Verne,Stella
Hiver 2024 - En codirection avec : Guiassa, Rachid
Development of a Universal Gauge Part for the Validation of the Probing System of a Numerically Controlled Machine Tool, par Guay,Julien
Hiver 2019 - En codirection avec :
Conception et optimisation d'une station laboratoire d'enduction de silicone polymérisable UV, par Damance,Benjamin
Été 2023
- En codirection avec : Tahan, Antoine
Contribution aux techniques de mesure des contraintes résiduelles des pièces brutes et usinées par diffraction aux neutrons, par Lalonde,Jean-François
Automne 2008 - En codirection avec : Tahan, Antoine
Modélisation des variations dimensionnelles et géométriques d'une structure soudée dans le cas d'une structure d'autocar, par Lévesque,Sylvain
Hiver 2009 - En codirection avec : Dufresne, Louis
Amélioration du design et prédiction des vitesses moyennes de sortie de buses à jet cohérent pour les procédés de rectification à l'aide de la CFD, par St-Pierre,Benoît
Été 2008 - En codirection avec :
A Framework for Predicting the Geometrical Errors of Thin-Floor Components in End Milling Using a Flexible Fixturing Setup, par Amjadian,Amir
Été 2021 - En codirection avec : Tahan, Antoine
Geometrical inspection of flexible parts using intrinsic geometry, par Radvar-Esfahlan,Hassan
Été 2010 - En codirection avec : Songmene, Victor
Usinage en détourage de laminés composites carbone/époxy, par Bérubé,Sébastien
Hiver 2012 - En codirection avec : Lebrun, Gilbert
Effect of Graphene Filler on the Mechanical, Electrical, and Thermal Properties of Polymer Composite, par Charfi,Mohamed Ali
Automne 2020 - En codirection avec : Lebrun, Gilbert
Étude sur le perçage en montage flexible d'un composite unidirectionnel à fibres de lin et matrice époxy, par Tchouteng,Thierry Stéphane
Été 2020 - En codirection avec :
Effect of Tool Wear on Quality of Carbon Fiber Reinforced Polymer Laminate During Edge Trimming, par Hamedanianpour,Hossein
Été 2013 - En codirection avec :
Optimisation du détourage robotisé de stratifiés en composites carbone/époxy, par Gauthier,Sébastien
Été 2014 - En codirection avec : Dubé, Martine
Influence de la pression de mise en forme sur le détourage de stratifiés carbone/époxy, par Coulon,Pierre
Automne 2013 - En codirection avec : Lebrun, Gilbert
Influence de la température de coupe sur les propriétés mécaniques en traction uni-axiale d'un composite carbone/époxy et étude de l'usinabilité d'un composite lin/époxy, par Delahaigue,Jérémy
Été 2015 - En codirection avec : Balazinski, Marek
Échauffement généré dans les plaques d'aluminium 2024 lors de l'usinage mécanique de surface : application à l'usinage des poches sur revêtement de fuselage, par Il,Alexandre
Automne 2015 - En codirection avec : Demers, Vincent
Conception, fabrication et validation d'une presse à injection basse pression pour le procédé des poudres métalliques, par G. Lamarre,Simon
Automne 2016 - En codirection avec : Ouellet-Plamondon, Claudiane
Influence du graphène sur la température de détourage de composite carbone-époxy, par Mathieu,Ronan
Automne 2020 - En codirection avec : Beauchamp, Yves
Optimisation des paramètres de détourage des composites à fibres de lin et comparaison avec le détourage des composites à fibres de verre, par Karabibene,Nouha
Automne 2017 - En codirection avec : Ouellet-Plamondon, Claudiane
Influence des additifs sur l'usinabilité des composites GFRP, par Kuate Togue,Honore
Hiver 2019 - En codirection avec : Ouellet-Plamondon, Claudiane
Influence de nanoparticules sur l'usinabilité et les propriétés mécaniques des matériaux composites, par El Ghaoui,Khalid
Été 2019 - En codirection avec :
Effet des additifs sur la qualité du perçage de matériaux composites de type GFRP, par Jammel,Siwar
Été 2024
- En codirection avec :
Vérification dimensionnelle et géométrique de pièces par alignement de surfaces en CAO, par Savelyev,Vadym
Été 2008 - En codirection avec :
Soutien technique au département PPH APU, par Valdez Loya,Andres Gilberto
Hiver 2020 - En codirection avec :
Développement et fabrication d'un système de montage qui permettra l'usinage de laminés de matériaux composites et l'évaluation de l'usure des outils de coupe et leur effet sur la qualité des laminés en matériaux composites, par Montoya Burga,Ricardo Hernan
Automne 2012 - En codirection avec :
Développement et application de l'outil CATALIST, par Fine,Anne-Gaëlle
Hiver 2016 - En codirection avec :
Mise en place d'un environnement numérique pour robot (logiciel et post-processeur), par Dupont,Godefroy
Hiver 2023 - En codirection avec :
Programmation d'un post-processeur pour machine-outil MAZAK, par Larroque,Robin
Hiver 2022 - En codirection avec :
Introduction aux outils de gestion de projet offerts par les solutions PLM (Product Lifecycle Management), par Lucchesi,Julian
Été 2017 - En codirection avec :
Modélisation MBSE de systèmes avions par la méthode Arcadia, par Moriceau,Martin
Automne 2017 - En codirection avec :
Validation d'un concept de pièce étalon universelle pour la calibration des systèmes de mesure d'une machine à contrôle numérique, par Lebrun,Maxime
Été 2020 - En codirection avec :
Ingénierie de conception fuselage avant & cockplit C-Series à Bombardier, par Saurin,Tom
Hiver 2018 - En codirection avec :
Analyse de données d’usinage orbital sur un matériau composite de CFRP/Ti, par Anquetin,Yann
Été 2020
- En codirection avec :
Méthodes d'alignement pour machines à mesurer tridimensionnelles protables, par Popovici,Dan
Hiver 2010
- En codirection avec : Lebrun, Gilbert
Experimental Investigation and Modeling of Surface Machining of High Performance CFRP for the Aerospace Industry, par Ghafarizadeh,Seyedbehzad
Hiver 2016 - En codirection avec : Bouzid, Hakim A.
On the Characterization of Johnson-Cook Constants : Numerical and Expérimental Study of High Speed Machining Aerospace Alloys, par Daoud,Monzer
Automne 2016 - En codirection avec : Lebrun, Gilbert
Comprehensive Study of Unidirectional Flax/Epoxy Composites; an Evaluation of Material Properties and Fracture Behavior, par Saadati,Yousef
Automne 2020 - En codirection avec : Balazinski, Marek
Online Tool Condition Monitoring Implementation using Fractal Analysis, par Jamshidi,Maryam
Automne 2022
- En codirection avec :
Support à la production du Global 7500 : Analyse des problèmes récurrents, par Dayres,Emmanuel
Été 2021 - En codirection avec :
Concepteur mécanique, par Et Tabti,Karim
Été 2023 - En codirection avec :
AEPONYX - Développement logiciel, par Gaillot,Quentin
Été 2019 - En codirection avec :
20212LES_V001, par Kouam Fosso,Kouam Fosso
Automne 2021 - En codirection avec :
Ingénieur stagiaire conception mécanique développement de produit, par Damance,Benjamin
Été 2023
Publications
- S. Lamarre, V. Demers, J. F. Chatelain. 2016 « Moldability of feedstock for LPIM ». Affiche présentée lors de la conférence : ASM-Montréal : Soirée des étudiants (Montréal, QC, Canada, 9 mars 2016)
- Abdelmalek Elhadi, Mohamed Slamani, Salah Amroune, Mustapha Arslane, Jean-François Chatelain, Mohammad Jawaid, Tarek Bidi. 2024 « Precision drilling optimization in jute/palm fiber reinforced hybrid composites ». Measurement: Journal of the International Measurement Confederation vol. 236
- Madani Grine, Mohamed Slamani, Aissa Laouissi, Mustapha Arslane, Mansour Rokbi, Jean-François Chatelain. 2024 « Enhanced investigations and modeling of surface roughness of epoxy/Alfa fiber biocomposites using optimized neural network architecture with genetic algorithms ». International Journal of Advanced Manufacturing Technology vol. 130 , nº 5-6. p. 3115-3132
- Mohamed Slamani, Hocine Makri, Aissa Boudilmi, Ilian A. Bonev, Jean-François Chatelain. 2024 « Calibration strategies for enhancing accuracy in serial industrial robots for orbital milling applications ». Industrial Robot
- Madani Grine, Mohamed Slamani, Mustapha Arslane, Mansour Rokbi, Jean-François Chatelain. 2023 « Investigation of the machining behavior of unidirectional Alfa (Stipa tenacissima L.)/epoxy composite material ». International Journal of Advanced Manufacturing Technology vol. 128 , nº 7-8. p. 3183-3196
- Amir Amjadian, Jean-François Chatelain, Davood Shahriari. 2022 « Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ». Journal of Advanced Research in Engineering & Technology vol. 6 , nº 1. p. 1-5
- Maryam Jamshidi, Jean-François Chatelain, Xavier Rimpault, Marek Balazinski. 2022 « Tool condition monitoring based on the fractal analysis of current and cutting force signals during CFRP trimming ». International Journal of Advanced Manufacturing Technology vol. 121 , nº 11-12. p. 8127-8142
- Maryam Jamshidi, Jean-François Chatelain, Xavier Rimpault, Marek Balazinski. 2022 « Tool condition monitoring using machine tool spindle electric current and multiscale analysis while milling steel alloy ». Journal of Manufacturing and Materials Processing vol. 6 , nº 5
- Ronan Mathieu, Mohamed Ali Charfi, Jean-François Chatelain, Claudiane Ouellet-Plamondon, Roger Serra, Gilbert Lebrun. 2022 « Effect of graphene additive on cutting forces and temperature during the trimming process of CFRP ». International Journal of Advanced Manufacturing Technology vol. 122 , nº 9-10. p. 3969-3981
- Ahlem Mechta, Mohamed Slamani, Moussa Zaoui, René Mayer, Jean-François Chatelain. 2022 « Correlation assessment and modeling of intra-axis errors of prismatic axes for CNC machine tools ». International Journal of Advanced Manufacturing Technology vol. 120. p. 5093-5115
- M. Slamani, H. Chafai, J. F. Chatelain. 2022 « Effect of milling parameters on the surface quality of a flax fiber-reinforced polymer composite ». Proceedings of the Institution of Mechanical Engineers Part E-Journal of Process Mechanical Engineering
- Mustapha Arslane, Mohamed Slamani, Jean-François Chatelain. 2021 « Development and validation of a machining fixture for complex-shaped components based on Pluckerian matrix approach and SDT concept ». International Journal of Advanced Manufacturing Technology vol. 114. p. 1697-1716
- Arquimedes Castillo-Morales, Xavier Rimpault, Jean-François Chatelain, Gilbert Lebrun. 2021 « Temperature study during the edge trimming of carbon fiber-reinforced plastic [0]8 /ti6al4v stack material ». Journal of Composites Science vol. 5 , nº 5
- Mohamed Slamani, Jean-Francois Chatelain, Alexandre Il, Marek Balazinski. 2021 « Statistical analysis and modeling of temperature distribution during various milling operations of thin walled aircraft parts ». Physica A: Statistical Mechanics and its Applications vol. 570
- Mohamed Slamani, Nouha Karabibene, Jean-François Chatelain, Yves Beauchamp. 2021 « Edge trimming of flax fibers and glass fibers reinforced polymers composite – An experimental comparative evaluation ». International Journal of Material Forming vol. 14 , nº 6. p. 1497-1510
- Mohamed Slamani, Nouha Karabibene, Jean-Francois Chatelain, Xavier Rimpault, Yves Beauchamp. 2021 « Statistical analysis of surface roughness during high speed edge trimming of flax-fiber composite based on the Split-Split plot randomized complete block design ». Measurement: Journal of the International Measurement Confederation vol. 184
- Mohamed Ali Charfi, Ronan Mathieu, Jean-François Chatelain, Claudiane Ouellet-Plamondon, Gilbert Lebrun. 2020 « Effect of graphene additive on flexural and interlaminar shear strength properties of carbon fiber-reinforced polymer composite ». Journal of Composites Science vol. 4 , nº 4
- Maryam Jamshidi, Xavier Rimpault, Marek Balazinski, Jean-François Chatelain. 2020 « Fractal analysis implementation for tool wear monitoring based on cutting force signals during CFRP/titanium stack machining ». International Journal of Advanced Manufacturing Technology vol. 106 , nº 9-10. p. 3859-3868
- Yousef Saadati, Jean-François Chatelain, Gilbert Lebrun, Yves Beauchamp, Philippe Bocher, Nicolas Vanderesse. 2020 « A study of the interlaminar fracture toughness of unidirectional flax/epoxy composites ». Journal of Composites Science vol. 4 , nº 2
- Yousef Saadati, Gilbert Lebrun, Christophe Bouvet, Jean-François Chatelain, Yves Beauchamp. 2020 « Study of translaminar fracture toughness of unidirectional flax/epoxy composite ». Composites Part C: Open Access vol. 1
- Yousef Saadati, Gilbert Lebrun, Jean-François Chatelain, Yves Beauchamp. 2020 « Experimental investigation of failure mechanisms and evaluation of physical/mechanical properties of unidirectional flax–epoxy composites ». Journal of Composite Materials vol. 54 , nº 20. p. 2781-2801
- Mohamed Slamani, Jean-François Chatelain. 2020 « Kriging versus Bezier and regression methods for modeling and prediction of cutting force and surface roughness during high speed edge trimming of carbon fiber reinforced polymers ». Measurement: Journal of the International Measurement Confederation vol. 152
- Khalid El-Ghaoui, Jean-François Chatelain, Claudiane Ouellet-Plamondon. 2019 « Effect of graphene on machinability of glass fiber reinforced polymer (GFRP) ». Journal of Manufacturing and Materials Processing vol. 3 , nº 3
- Khalid El-Ghaoui, Jean-François Chatelain, Claudiane Ouellet-Plamondon, Ronan Mathieu. 2019 « Effects of nano organoclay and wax on the machining temperature and mechanical properties of Carbon Fiber Reinforced Plastics (CFRP) ». Journal of Composites Science vol. 3 , nº 3
- Mohamed Slamani, Jean-François Chatelain. 2019 « Assessment of the suitability of industrial robots for the machining of carbon-fiber reinforced polymers (CFRPs) ». Journal of Manufacturing Processes vol. 37. p. 177-195
- Mohamed Slamani, Jean-Francois Chatelain, Hossein Hamedanianpour. 2019 « Influence of machining parameters on surface quality during high speed edge trimming of carbon fiber reinforced polymers ». International Journal of Material Forming vol. 12 , nº 3. p. 331-353
- Kanglin Xing, Xavier Rimpault, J. R. R. Mayer, Jean-François Chatelain, Sofiane Achiche. 2019 « Five-axis machine tool fault monitoring using volumetric errors fractal analysis ». CIRP Annals vol. 68 , nº 1. p. 555-558
- Alessandra Caggiano, Xavier Rimpault, Roberto Teti, Marek Balazinski, Jean-Francois Chatelain, Luigi Nele. 2018 « Machine learning approach based on fractal analysis for optimal tool life exploitation in CFRP composite drilling for aeronautical assembly ». CIRP Annals vol. 67 , nº 1. p. 483-486
- Alexandre Il, Jean-François Chatelain, Jean-François Lalonde, Marek Balazinski, Xavier Rimpault. 2018 « An experimental investigation of the influence of cutting parameters on workpiece internal temperature during Al2024-T3 milling ». International Journal of Advanced Manufacturing Technology vol. 97 , nº 1-4. p. 413-426
- N. Karabibene, J-F. Chatelain, Y. Beauchamp, G. Lebrun. 2018 « Effect of machining parameters on the uncut fibers of a unidirectional flax fiber reinforced composite ». Journal of Management and Engineering Integration vol. 11 , nº 1
- Xavier Rimpault, Marek Balazinski, Jean-François Chatelain. 2018 « Fractal analysis application outlook for improving process monitoring and machine maintenance in manufacturing 4.0 ». Journal of Manufacturing and Materials Processing vol. 2 , nº 3
- M. Daoud, J. F. Chatelain, A. Bouzid. 2017 « Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ». International Journal of Mechanical Sciences vol. 122. p. 392-404
- J. Delahaigue, J. F. Chatelain, G. Lebrun. 2017 « Machining analysis of unidirectional and bi-directional flax-epoxy composite laminates ». Proceedings of the Institution of Mechanical Engineers, Part L : Journal of Materials: Design and Applications vol. 231 , nº 1-2. p. 196-209
- Jérémy Delahaigue, Jean-Francois Chatelain, Gilbert Lebrun. 2017 « Influence of cutting temperature on the tensile strength of a carbon fiber-reinforced polymer ». Fibers vol. 5 , nº 4
- Seyedbehzad Ghafarizadeh, Amir Masoud Tahvilian, Jean-François Chatelain, Zhaoheng Liu, Henri Champliaud, Gilbert Lebrun. 2017 « Numerical simulation of ball-end milling with SPH method ». International Journal of Advanced Manufacturing Technology vol. 88 , nº 1. p. 401-408
- Simon G. Lamarre, Vincent Demers, Jean-François Chatelain. 2017 « Low-pressure powder injection molding using an innovative injection press concept ». International Journal of Advanced Manufacturing Technology vol. 91 , nº 5-8. p. 2595-2605
- X. Rimpault, J. F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski. 2017 « Tool wear and surface quality assessment of CFRP trimming using fractal analyses of the cutting force signals ». CIRP Journal of Manufacturing Science and Technology vol. 16. p. 72-80
- Xavier Rimpault, Jean-François Chatelain, Jolanta Ewa Klemberg-Sapieha, Marek Balazinksi. 2017 « Burr height monitoring while drilling of CFRP/titanium/aluminium stacks ». Mechanics & Industry vol. 18 , nº 1
- Seyedbehzad Ghafarizadeh, Jean-François Chatelain, Gilbert Lebrun. 2016 « Effect of cutting tool lead angle on machining forces and surface finish of CFRP laminates ». Science and Engineering of Composite Materials vol. 23 , nº 5. p. 543-550
- Seyedbehzad Ghafarizadeh, Jean-François Chatelain, Gilbert Lebrun. 2016 « Finite element analysis of surface milling of carbon fiber-reinforced composites ». International Journal of Advanced Manufacturing Technology vol. 87 , nº 1. p. 399-409
- Seyedbehzad Ghafarizadeh, Gilbert Lebrun, Jean-François Chatelain. 2016 « Experimental investigation of the cutting temperature and surface quality during milling of unidirectional carbon fiber reinforced plastic ». Journal of Composite Materials vol. 50 , nº 8. p. 1059-1071
- X. Rimpault, J. F. Chatelain, J. E. Klemberg-Sapieha, M. Balazinski. 2016 « Surface profile texture characterization of trimmed laminated composite in the stacking sequence direction ». Measurement vol. 91. p. 84-92
- Mohamed Slamani, Sébastien Gauthier, Jean-François Chatelain. 2016 « Comparison of surface roughness quality obtained by high speed CNC trimming and high speed robotic trimming for CFRP laminate ». Robotics and Computer-Integrated Manufacturing vol. 42. p. 63-72
- M. Daoud, J. F. Chatelain, A. Bouzid. 2015 « Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ». International Journal of Advanced Manufacturing Technology vol. 81 , nº 9-12. p. 1987-1997
- M. Daoud, W. Jomaa, J. F. Chatelain, A. Bouzid. 2015 « A machining-based methodology to identify material constitutive law for finite element simulation ». International Journal of Advanced Manufacturing Technology vol. 77 , nº 9-12. p. 2019-2033
- Guillaume Mullier, Jean-François Chatelain. 2015 « Influence of thermal damage on the mechanical strength of trimmed CFRP ». International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering vol. 9 , nº 8. p. 1509-1516
- Sy Quy Nguyen, Jean-Francois Chatelain. 2015 « Study of the milling process for thin components using a flexible setup configuration ». Applied Mechanics and Materials vol. 704. p. 27-31
- Mohamed Slamani, Jean-François Chatelain, Hossein Hamedanianpour. 2015 « Comparison of two models for predicting tool wear and cutting force components during high speed trimming of CFRP ». International Journal of Material Forming vol. 8 , nº 2. p. 305-316
- Mohamed Slamani, Sébastien Gauthier, Jean-François Chatelain. 2015 « A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs ». Measurement: Journal of the International Measurement Confederation vol. 59. p. 268-283
- Mohamed Slamani, Sébastien Gauthier, Jean-François Chatelain. 2014 « Analysis of trajectory deviation during high speed robotic trimming of carbon-fiber reinforced polymers ». Robotics and Computer-Integrated Manufacturing vol. 30 , nº 5. p. 546-555
- Jean-François Chatelain. 2012 « A university-industry research collaboration for the optimization of the machining process of multilayer materials for the aerospace industry ». Journal of Management and Engineering Integration vol. 5 , nº 1. p. 23-33
- Jean-François Chatelain, Jean-François Lalonde, Antoine S. Tahan. 2012 « Effect of Residual Stresses Embedded within Workpieces on the Distortion of Parts after Machining ». International Journal of Mechanics vol. 6 , nº 1. p. 43-51
- Jean-François Chatelain, Imed Zaghbani. 2012 « A Comparison of Special Helical Cutter Geometries Based on Cutting Forces for the Trimming of CFRP Laminates ». International Journal of Mechanics vol. 6 , nº 1. p. 52-59
- Jean-François Chatelain, Imed Zaghbani, Joseph Monier. 2012 « Effect of Ply Orientation on Roughness for the Trimming Process of CFRP Laminates ». World Academy of Science, Engineering & Technology vol. 6 , nº 8. p. 988-994
- Benoit St-Pierre, Jean-François Chatelain, Louis Dufresne. 2012 « Développement d’un modèle semi-empirique pour la prédiction de la cohérence d’un jet utilisé dans les procédés de rectification ». Transactions of the Canadian Society for Mechanical Engineering vol. 36 , nº 2. p. 127-142
- Imed Zaghbani, Jean-Fraçois Chatelain, Victor Songmene, Sébastien Bérubé, Abdelatif Atarsia. 2012 « A comprehensive analysis of cutting forces during routing of multilayer carbon fiber-reinforced polymer laminates ». Journal of Composite Materials vol. 46 , nº 16. p. 1955-1971
- Imed Zaghbani, Jean-François Chatelain, Sébastien Bérubé, Victor Songmene, Justin Lance. 2012 « Analysis and modelling of cutting forces during the trimming of unidirectional CFRP composite laminates ». International Journal of Machining and Machinability of Materials vol. 12 , nº 4. p. 337-357
- Serge St-Martin, Jean-François Chatelain, René Mayer, Serafettin Engin, Stéphane Chalut. 2011 « Prediction of thin wall surface shape through simulation of the machining process for light alloy workpieces ». Journal of Machining and Forming Technologies vol. 3 , nº 3-4. p. 185-202
- Serge St-Martin, Jean-François Chatelain, René Mayer, H. Paris. 2009 « Étude du comportement dynamique d'une paroi mince en alliage léger durant une opération d'usinage haute vitesse ». Revue d'Ingénierie Numérique Collaborative vol. 3 , nº 1
- Jean-François Chatelain, Réjean Roy, René Mayer. 2008 « Development of a spiral trajectory for high speed roughing of light alloy aerospace components ». WSEAS Transactions on Applied and Theoretical Mechanics vol. 3 , nº 3. p. 83-93
- Jean-François Chatelain. 2005 « A level-based optimization algorithm for complex part localization ». Precision Engineering vol. 29 , nº 2. p. 197–207
- Jean-François Chatelain, Y. Boutin, Françoise Marchand, Antoine Tahan. 2004 « Productivity assessment from advanced integration of canned cycles to CAD/CAM software ». WSEAS Transactions on Systems vol. 3 , nº 3. p. 1187-92
- Étienne Fortin, Jean-François Chatelain, Louis Rivest. 2004 « An innovative software architecture to improve information flow from CAM to CNC ». Computers & Industrial Engineering vol. 46 , nº 4. p. 655-667
- Étienne Fortin, Louis Rivest, Jean-François Chatelain. 2004 « Combiner de multiple langages pour la programmation des contrôleurs de machines-outils à architecture ouverte ». Transactions of the Canadian Society for Mechanical Engineering vol. 28 , nº 3-4. p. 511-530
- Jean-François Chatelain, C. Fortin. 2001 « Balancing technique for optimal blank part machining ». Precision Engineering vol. 25 , nº 1. p. 13-23
- Vincent Demers, Simon Lamarre, Jean-François Chatelain. 2021-02-16 « Low-pressure powder injection molding machine, kit and method ». US 10,919,092.
- Jean-François Chatelain, C. M. Ouellet-Plamondon, B. Lasseur, H. Kuate-Togue. 2019 « Effect of additives on the machinability of glass fiber reinforced polymer ». In Materials Design and Applications II. p. 295-312. Springer Verlag
- Louis-Alexandre Généreux, Gilbert Lebrun, Martin Viens, Jean-François Chatelain. 2019 « Evaluation of machining defects in a composite laminate by combining non-destructive and tensile testing ». In Materials Design and Applications II. p. 341-362. Springer Verlag
- M. Slamani, J. F. Chatelain. 2015 « High-speed robotic trimming of CFRP ». In Machinability of Fibre-Reinforced Plastics. p. 83-101. De Gruyter
- Jean-François Chatelain, C. Fortin. 2002 « Optimal workpiece localization for machining applications ». In Integrated design and manufacturing in mechanical engineering. p. 247-254. Kluwer Academic Publishers
- Jean-François Chatelain, Roland Maranzana, Serge St-Martin. 2002 « A solid model comparison approach based on a model tree analysis ». In Advances in systems theory, mathematical methods and applications . p. 239-244. WSEAS Press
- A. Amjadian, J-F. Chatelain, D. Shariari. 2022 « Prediction of geometrical errors of thin floor components in milling using a flexible fixturing setup ». Communication lors de la conférence : IAARHIES 280th International Conference on Engineering & Technology, ICET (Vancouver, BC, Canada, Feb. 24-25, 2022)
- Guillaume Mullier, Jean-François Chatelain. 2015 « Influence of thermal damage on the mechanical strength of trimmed CFRP ». Communication lors de la conférence : 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015)
- Mohamed Slamani, Jean-François Chatelain. 2015 « Issues and challenges in robotic trimming of CFRP ». Communication lors de la conférence : ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics (Colmar, Alsace, France, July 21-23, 2015)
- Antoine Tahan, Victor Songmene, Jean-François Chatelain. 2004 « Case study of the application of statistical tolerances taking account of correlation ». Communication lors de la conférence : International Conference on Computers and Industrial Engineering (San Francisco, CA, USA, Nov., 2004)
- Y. Amtout, Victor Songmene, Jean-François Chatelain. 2003 « Optimisation de trajectoires d'outils en FAO pour l'usinage à haute performance des moules en P20 ». Communication lors de la conférence : 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9, 2003)
- Jean-François Chatelain. 2003 « Laboratoire d'ingénierie des produits, procédés et systèmes de l'ÉTS ». Communication lors de la conférence : 3e Journée d'Étude Interinstitutionnelle du Centre de Recherche en Fabrication Haute Performance (Bécancour, QC, Canada, 21 nov. 2003)
- Jean-François Chatelain, Y. Boutin. 2003 « Intégration de cycles d'usinage avancés aux logiciels de CFAO ». Communication lors de la conférence : 4th International Conference on Industrial Automation (Montreal, QC, Canada, June 9, 2003)
- Y. Boutin, Jean-François Chatelain. 2002 « Intégration des cycles d'usinage avancés aux logiciels de FAO ». Communication lors de la conférence : Séminaire sur l'Usinage à Grande Vitesse (Longueuil, QC, Canada, sept. 2002)
- Roland Maranzana, Louis Rivest, Jean-François Chatelain. 2000 « Systèmes de CAO et ingénierie concourante : les effets pervers ». Communication lors de la conférence : Université d'Été de Recherche Francophone, Ingénierie Simultanée et Concourante (ISC 2000) (Arc-et-Senans, France, 3-5 juil. 2000)
- Jean-François Chatelain. 1998 « Alignement imposé des points de mesure dans les zones de modèles solides pour la vérification des tolérances géométriques ». Communication lors de la conférence : Forum sur la Métrologie 98 (Laval, QC, Canada, nov. 1998)
- Mustapha Arslane, Mohamed Slamani, Belkacem Aoufi, Jean-François Chatelain. 2022 « Locator placement optimization during machining turbine blades using genetic algorithm ». ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
- Madani Grine, Mohamed Slamani, Mustapha Arslane, Jean-François Chatelain. 2022 « Assessment of the hole quality during drilling alfa fiber (Stipa tenacissima) reinforced composites ». ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
- Ahlem Mechta, Mohamed Slamani, Moussa Zaoui, Jean-François Chatelain. 2022 « A comparative evaluation of the performance of three CNC machine tools ». ICAENS : 3rd International Conference on Applied Engineering and Natural Sciences ICAENS : Proceedings Book (Konya, Turkey, July 20-23, 2022)
- K. Xing, X. Rimpault, J. R. R. Mayer, J. F. Chatelain, S. Achiche. 2021 « Quantitative assessment of machine tools precision states through fractal analysis of machine error parameters ». 14th International Conference on Laser Metrology, Coordinate Measuring Machine and Machine Tool Performance (LAMDAMAP) (En ligne, Mar. 10-11, 2021) euspen
- Yousef Saadati, Jean-François Chatelain, Gilbert Lebrun, Yves Beauchamp. 2019 « Comparison of density measurement methods for unidirectional flax-epoxy polymer composites ». European Conference on Multifunctional Structures (EMuS) (Barcelona, Spain, June, 11-12) International Centre for Numerical Methods in Engineering (CIMNE)
- Yousef Saadati, Jean-François Chatelain, Gilbert Lebrun, Yves Beauchamp. 2019 « Tension and compression properties of unidirectional flax fibre-reinforced epoxy composites for modeling of machining processes ». 27th Canadian Congress of Applied Mechanics (CANCAM) (Sherbrooke, QC, Canada, May 27-30, 2019)
- Kanglin Xing, Xavier Rimpault, J. R. R. Mayer, Jean-François Chatelain, Sofiane Achiche. 2019 « Quantitative assessment of machine tools condition through fractal analysis of volumetric error vector similarity measures ». 7th CIRP Global Web Conference (CIRPe) (En ligne, Oct. 16-19, 2019) Elsevier B.V.
- Pierre Coulon, Jean-François Chatelain, Martine Dubé, Xavier Rimpault. 2018 « Effect of curing pressure on machinability of carbon fiber composite ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) Elsevier
- N. Karabibene, J-F. Chatelain, Y. Beauchamp, G. Lebrun. 2018 « Effect of machining parameters on the quality of a flax fiber reinforced polymer composite ». International Conference on Industry, Engineering, and Management Systems (IEMS 2018) (Cocoa Beach, FL, USA, Mar. 19-21, 2018)
- H. Kuate-Togue, J-F. Chatelain, C. Ouellet-Plamondon. 2018 « Effect of additives on cutting temperature of glass fibers reinforced polymers ». Proceedings of The Canadian Society for Mechanical Engineering International Congress (CSME) (Toronto, ON, Canada, May 27-30, 2018) CSME
- X. Rimpault, J-F. Chatelain, M. Balazinski. 2018 « Fractal analysis applications for improving monitoring and prediction systems in machining ». 7th International Conference on Virtual Machining Process Technology (VMPT 2018) (Hamilton, ON, Canada, May 07-09, 2018)
- Xavier Rimpault, Alexandre Il, Jean-François Chatelain, Jean-François Lalonde, Marek Balazinski. 2018 « Workpiece subsurface temperature study during aluminum skin milling in slotting and ramping ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) Elsevier
- K. Karabibene, J.-F. Chatelain, Y. Beauchamp, G. Lebrun. 2017 « Optimization of machining parameters for the trimming process of unidirectional flax fiber composites ». 10th Canadian-International Conference on Composites (Ottawa, ON, Canada, July 17-20, 2017)
- M. Slamani, S. Djeffal, J-F. Chatelain. 2017 « Experimental investigation of robotic machining errors of carbon fiber reinforced polymers ». La 3ème Conférence Internationale de Mécanique (ICM) (Annaba, Algérie, 26-27 avril 2017)
- S. G. Lamarre, V. Demers, J-F. Chatelain. 2016 « Experimental study of the rheological properties and moldability of wax-based feedstocks used in low-pressure powder injection molding ». MONTREAL’2016 AES-ATEMA 28th International on Advances and Trends in Engineering Materials and their Applications (Montreal, QC, Canada, June 20-24, 2016) Advanced Engineering Solutions
- Xavier Rimpault, Jean-François Chatelain, Jolanta E. Klemberg-Sapieha, Marek Balazinski. 2016 « Surface profile topography of trimmed and drilled carbon/epoxy composite ». 3rd CIRP Conference on Surface Integrity (Charlotte, NC, United states, June 8-10, 2016) Elsevier
- Xavier Rimpault, Jean-François Chatelain, Jolanta-Ewa Klemberg-Sapieha, Marek Balazinski. 2016 « Fractal analysis of cutting force and acoustic emission signals during CFRP machining ». 7th CIRP Conference on High Performance Cutting (Chemnitz, Germany, May 31-June 2, 2016) Elsevier
- Guillaume Mullier, Jean-François Chatelain. 2015 « Influence of thermal damage on the mechanical strength of trimmed CFRP ». 17th International Conference on Materials Science, Metal and Manufacturing (ICMSMM 2015) (Barcelona, Spain, Aug. 17-18, 2015)
- Xavier Rimpault, Jean-François Chatelain, J.E. Klemberg-Sapieha, M. Balazinksi. 2015 « A new approach for surface profile roughness characterization in the laminated composite ply plane ». 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015) Canadian Aeronautics and Space Institute
- Xavier Rimpault, Jean-François Chatelain, J.E. Klemberg-Sapieha, M. Balazinski. 2015 « Surface condition of high speed trimming of CFRP ». 6th International Conference on science and technology of composite materials (COMAT) (Buenos Aires, Argentina, May 7-8, 2015)
- Xavier Rimpault, Jean-François Chatelain, Jolanta E. Klemberg-Sapieha, Marek Balazinksi. 2015 « Surface quality assessment of CFRP high speed trimming using fractal analyses of the cutting force signals ». 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)
- Xavier Rimpault, Jean-François Chatelain, Jolanta E. Klemberg-Sapieha, Marek Balazinksi. 2015 « Tool wear impact on surface roughness condition of CFRP high speed trimming ». 4th international conference on virtual machining process technology (VMPT 2015) (Vancouver, BC, Canada, June 2-5, 2015)
- Mohamed Slamani, Jean-François Chatelain. 2015 « Issues and challenges in robotic trimming of CFRP ». ICINCO 2015 - 12th International Conference on Informatics in Control, Automation and Robotics, Proceedings (Colmar, Alsace, France, July 21-23, 2015) SciTePress
- M. Daoud, W. Jomaa, Jean-François Chatelain, Abdel-Hakim Bouzid, Victor Songmene. 2014 « Identification of material constitutive law constants using machining tests: A response surface methodology based approach ». 2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014) WITPress
- Monzer Daoud, Jean-François Chatelain, Hakim Bouzid. 2014 « On the effect of Johnson Cook material constants to simulate Al2024-T3 machining using finite element modeling ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
- Seyedbehzad Ghafarizadeh, Jean-François Chatelain, Gilbert Lebrun. 2014 « Experimental investigation to study cutting temperature during milling of unidirectional Carbon Fiber Reinforced Plastic ». ASME 2014 International Mechanical Engineering Congress and Exposition, IMECE 2014, November 14, 2014 - November 20, 2014 (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
- Walid Jomaa, Monzer Daoud, Victor Songmene, Philippe Bocher, Jean-François Châtelain. 2014 « Identification and validation of Marusich's constitutive law for finite element modeling of high speed machining ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
- S. B. Ghafarizadeh, J. F. Chatelain, G. Lebrun. 2013 « Multi axis machining of high performance CFRP for aerospace industry ». 19th International Conference on Composite Materials (ICCM 2013) (Montreal, QC, Canada, July 28 - Aug. 02, 2013) International Committee on Composite Materials
- Hossein Hamedanianpour, Jean-François Chatelain. 2013 « Effect of tool wear on quality of carbon fiber reinforced polymer laminate during edge trimming ». Manufacturing Engineering and Process II (Vancouver, B.C., Canada, Apr. 13-14, 2013) Trans Tech Publications Ltd
- Jean-François Chatelain, J. F. Lalonde, Antoine Tahan. 2011 « A comparison of the distortion of machined parts resulting from residual stresses within workpieces ». 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011) World Scientific and Engineering Academy and Society
- Jean-François Chatelain, Imed Zaghbani. 2011 « Effect of tool geometry special features on cutting forces of multilayered CFRP laminates ». 4th International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS) (Barcelona, Spain, Sept. 15-17, 2011) World Scientific and Engineering Academy and Society
- I. Zaghbani, J.-F. Chatelain, V. Songmene, S. Bérubé, A. Atarsia. 2011 « Modeling of cutting forces for multilayered CFRP laminates ». 26th Annual Technical Conference of the American Society for Composites : 2nd Joint US-Canada Conference on Composites (Montreal, QC, Canada, Sept. 26-28, 2011) DEStech Publications
- R. Roy, Jean-François Chatelain, R. Mayer, S. Chalut, S. Engin. 2008 « Optimization of adaptive spiral toolpaths for pocket machining ». International Computer Aided Design Conference and Exhibition (CAD) (Orlando, FL, USA, June 23-27, 2008)
- R. Roy, Jean-François Chatelain, R. Mayer, S. Chalut, S. Engin. 2008 « Programming of a machining procedure for adaptive spiral cutting trajectories ». 10th WSEAS International Conference on Automatic Control, Modelling and Simulation (ACMOS) (Istanbul, Turkey, May 27-30, 2008) World Scientific and Engineering Academy and Society (WSEAS)
- S. St-Martin, Jean-François Chatelain, R. Mayer, S. Engin, S. Chalut. 2008 « Simulation de l'usinage de finition des parois minces de composantes aéronautiques en alliage léger ». Colloque sur la Recherche en Conception Assistée par Ordinateur (CAO) au Québec (Trois-Rivières, QC, Canada, 14 mai 2008)
- Serge St-Martin, Jean-François Chatelain, René Mayer, Serafettin Engin, Stéphane Chalut. 2008 « Time domain simulation of thin wall surface finish machining for light alloy aerospace components ». Canadian Society for Mechanical Engineering Forum (CSME) (Ottawa, ON, Canada, June 5-8, 2008)
- M. Ben Salah, Jean-François Chatelain. 2007 « Part localization algorithm based on constrained alignment of surface patches ». Proceedings - 13th ISSAT International Conference on Reliability and Quality in Design (Seattle, WA, USA, Aug. 2-4, 2007) International Society of Science and Applied Technologies
- B. Salah, Jean-François Chatelain. 2007 « Part localization based on a surface patch alignment algorithm ». 2e Congrès International en Conception et Modélisation des Systèmes Mécaniques (CMSM) (Monastir, Tunisia, Mar. 19-21, 2007)
- K. Soufi, Jean-François Chatelain, Roland Maranzana. 2006 « A product change management system based on active features ». 16th CIRP International Design Seminar, Design & Innovation for Sustainable Society (Kananaskis, AB, Canada, July 16-19, 2006)
- B. Antri, Jean-François Chatelain, Françoise Marchand. 2004 « An integrated information model for the dimensional and geometrical inspection of mechanical parts ». 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME) (Bath, UK, Apr. 5-7, 2004) University of Bath
- Jean-François Châtelain. 2002 « Développement d'un post-processeur et d'un simulateur pour une machine 5 axes (phase 1) ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001) École de technologie supérieure
- Jean-François Châtelain. 2002 « Optimisation d'un post-processeur 5 axes et développement d'outillage spécialisé (phase II) ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001) École de technologie supérieure
- Jean-François Chatelain, C. Fortin. 2002 « Optimal workpiece localization for machining applications ». 3rd Integrated Design and Manufacturing in Mechanical Engineering Conference (Montreal, Canada, May, 2000) Springer-Verlag
- Jean-François Chatelain, Roland Maranzana, Serge St-Martin. 2002 « A solid model comparison approach based on a model tree analysis ». 4th WSEAS International Conference on Mathematics and Computers in Physics (MCP) (Cancun, Mexico, May 12-16, 2002) WSEAS
- Patrick Terriault, Jean-François Châtelain. 2002 « Développement de travaux personnalisés en conception assistée par ordinateur ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2000-2001 : Actes (Montréal, QC, Canada, 31 mai 2001) École de technologie supérieure
- Étienne Fortin, Jean-François Chatelain, Louis Rivest. 2001 « Improving information flow from CAM to CNC : an innovative architecture based on BNCL virtual machine ». 29th International Conference on Computers and Industrial Engineering (Montreal, QC, Canada, Nov. 1-3, 2001) École de technologie supérieure
- S. St-Martin, Jean-François Chatelain, Louis Rivest, Roland Maranzana. 2001 « L'évolution du modèle produit dans un contexte de SGDT: Vers la maîtrise du changement dans les modèles CAO ». 20e congrès international de la CFAO et des nouvelles technologies de conception et de fabrication (MICAD 2001) (Paris, France, 6-8 mars 2001)
- Jean-François Chatelain, C. Fortin. 2000 « Algorithme de localisation des pièces brutes pour l'usinage ». 3e conférence internationale sur la conception et la fabrication intégrées en mécaniques IDMME 2000 et Forum SCGM 2000 (Montréal, QC, Canada, Mai 2000)
- Jean-François Chatelain, C. Fortin. 1999 « A CAD/CAM integrated balancing system for blank part machining ». Troisième conférence internationale sur l'automatisation industrielle, École de technologie supérieure, Montréal, 7-9 juin 1999 : actes de la conférence = Third International Conference on Industrial Automation, École de technologie supérieure, Montréal, (Montreal, Canada, June 7-9, 1999) International Association of Industrial Automation
- Jean-François Chatelain. 1998 « Constrained alignment of measurement data within CAD solid zones for geometric tolerance verification ». Actes du Forum Métrologie 98 (Québec, QC, Canada, nov. 1998) Université Laval