14 septembre 2020
Patrice Seers
Professeur
Département
Département de génie mécanique
Formation
B.Ing., M.Ing. (ÉTS), Ph.D. (University of Texas, Austin)
Bureau
A-2126
Courriel
![Professeur en technologie, confiant avec un sourire accueillant.](https://www.etsmtl.ca/uploads/P20180504-Seers-Patrice-002.jpg)
Vue d'ensemble
Seers, Patrice
Unité de recherche
Axe de recherche
- Aéronautique et aérospatiale
Expertises
- Moteur à injection directe (diesel et à allumage commandé)
- Jet de carburant (spray)
- Combustion
- Biocarburants liquides (alcools, esters, etc.) et gazeux (biogaz)
- Simulations numériques des systèmes réactifs
Cours
Encadrements
- En codirection avec : Champliaud, Henri
Influence de l'utilisation du Biocarburant E85 sur les émissions poluantes d'un véhicule hybrique électrique, par Terrier,Philippe
Hiver 2005 - En codirection avec :
Modélisation d'un moteur diesel marin avec tubulure pour capteur de pression, par Chamberland,Carl
Été 2006 - En codirection avec :
Étude sur un modèle d'évaporation multicomposants appliqué aux gouttelettes de carburant dans des conditions de moteur diesel, par Landry,Xavier
Été 2007
- En codirection avec : Kharoune, Mourad
Production de carburants de nouvelle génération à partir du CO2, par Bujold-Desjarlais,Maxime
Hiver 2021
- En codirection avec : Lemaire, Romain
Développement d'un système d'anémométrie phase doppler pour la caractérisation de sprays, par Suel,Pierre-Alexis
Été 2019 - En codirection avec :
Mesures expérimentales et modélisation analytique de la pénétration d'un jet de kérosène issu d'un injecteur multi-trous, par Fleischmann,Antoine
Automne 2021 - En codirection avec :
Étude du système d'injection d'un moteur diesel à rampe d'injection commune, par Boudy,Frédéric
Hiver 2008 - En codirection avec :
Étude de la variation cyclique de combustion d'un moteur à allumage commandé à partir des températures d'échappement, par Morey,Francis
Automne 2009 - En codirection avec :
Étude numérique de conditions aux limites en situation de combustion turbulente non prémélangée, par Lemay,Jonathan
Été 2010 - En codirection avec : Kharoune, Lynda
Développement d'une nouvelle méthode de traitement des rejets industriels pour l'optimisation de la production du butanol, par Guemfing Simo,Rita
Été 2010 - En codirection avec :
Caractérisation de l'influence des conditions d'injection et des propriétés physiques sur les jets pour des mélanges d'essence et d'alcools, par Bruyère Bergeron,Simon
Été 2011 - En codirection avec : Glaus, Mathias
Construction de cycle normalisés spécifiques à des flottes de véhicules utilitaires pour un bilan des émissions polluantes, par Nachin,Guillaume
Été 2012 - En codirection avec :
Experimental Investigation of Flame Structure of Co2-Diluted Syngas and Biogas Mixtures by Laser Diagnostics, par Rehel,Brendan
Hiver 2013 - En codirection avec : Dufresne, Louis
Étude de l'écoulement cavitationnel dans un injecteur diésel simple trou, par Mousseau,Alexandre
Automne 2013 - En codirection avec :
Influence des gouttes d'éthanol sur la propagation d'une flamme laminaire prémélangée, par Chelelekian,Célia
Automne 2014 - En codirection avec : Garnier, François
Modélisation 0D/1D des émissions de particules de suie dans les turbines à gaz aéronautiques, par Bisson,Jérémie
Été 2014 - En codirection avec : Rousse, Daniel
Évaluation expérimentale de la combinaison injection multiple et biodiesel sur les performances et les émissions polluantes d'un moteur diesel, par Ledan,Thomas
Automne 2014 - En codirection avec : Dufresne, Louis
Caractérisation des structures complexes de l'écoulement interne d'un injecteur diésel à levée d'aiguille fixe, utilisant un modèle numérique RANS, par Pelletingeas,Alexandre
Été 2014 - En codirection avec :
Évaluation des émissions polluantes d'éthanol pour moteur à injection directe à allumage commandé, par Simon,Guillaume
Automne 2014 - En codirection avec :
Caractérisation du cliquetis dans un moteur expérimental, par Fleurent-Wilson,Eric Bruce
Été 2015 - En codirection avec :
Évaluation de l'utilisation de carburants oxygénés sur un moteur à injection directe avec l'utilisation des modes d'injection homogène et stratifiée, par Fournier,Sébastien
Été 2015 - En codirection avec : Belleau, Christian
Stratégie de commande pour un système hybride éolien diésel avec stockage d'air comprimé, par Perron,François
Été 2016 - En codirection avec : Dufresne, Louis
Études des écoulements transitoires à l'intérieur d'un injecteur diesel en fonction de la position de l'aiguille, par Reveillon,Damien
Hiver 2016 - En codirection avec : Garnier, François
Modélisation de l'influence des émissions issues des essais moteurs sur la qualité de l'air local, par Saamago Foffe,Serge
Été 2016 - En codirection avec : Godbout, Stéphane
Conception et caractérisation d'un montage expérimental de combustion d'huile de pyrolyse, par Elcadhi,Salha
Hiver 2017 - En codirection avec : Lemaire, Romain
Analyse des performances et émissions polluantes d'un moteur à allumage commandé à injection directe lors de l'utilisation de carburants oxygénés, par Boudreau,Amélie
Hiver 2017 - En codirection avec : Garnier, François
Formation du mélange par injection simple en milieu évaporatif avec une approche RANS, par Guillemette,Olivier
Été 2018 - En codirection avec :
Études numériques des instabilités de flammes prémélangées en régime laminaire, par Le Corvec,Lucas
Été 2017 - En codirection avec : Weiss, Julien
Développement d'une méthode de caractérisation externe et interne de sprays de carburants par imagerie rapide, par Jourdain,Cyprien
Été 2017 - En codirection avec : Brailovski, Vladimir
Design of Porous Medium Burners by Means of Additive Manufacturing, par Samoilenko,Mykhailo
Été 2018 - En codirection avec : Dufresne, Louis
Étude numérique de l'écoulement à froid et à chaud dans un brûleur poreux, par Billerot,Pierre-Lou
Été 2018 - En codirection avec :
Développement d'un modèle numérique évaporatif pour carburant complexe, par Thibodeau Vaillancourt,Jean-Simon
Été 2024 - En codirection avec :
Modélisation numérique des phénomènes se déroulant lors de l'inflammation initiale du mélange dans un moteur à allumage commandé, par Bigot,Lilian
Automne 2022 - En codirection avec : Lemaire, Romain
Étude numérique de la production de gaz de synthèse par combustion riche du méthane dans un brûleur poreux, par Roussel,Yann
Automne 2022 - En codirection avec : Lemaire, Romain
Étude de la propension à former des suies de divers carburants modèles du kérosène et de mélanges contenant des composés oxygénés, par Rainville,Carl
Hiver 2022 - En codirection avec :
Impact des stratégies d'injection double sous différentes pressions sur un moteur à allumage commandé à injection indirecte à l'essence, par Lafontaine,Jean-François
Hiver 2022 - En codirection avec :
Caractérisation de stratégies d'injection sur l'impact des performances d'un moteur, par Revest,Guillaume
Automne 2024 - En codirection avec :
Étude numérique sur le potentiel d'amélioration des performances moteur à l'aide de la RGE, par Cunha,Baptiste
Automne 2024 - En codirection avec :
Évaluation d'une nouvelle technologie pour réduire les émissions polluantes des moteurs à combustion interne, par Niquet,Gabriel
Été 2024 - En codirection avec :
Étude numérique d'un système pour réduire les émissions polluantes, par Bigaouette,Francis
Automne 2024
- En codirection avec :
Étude aérodynamique sur un profil d’aile d’avion impacté par le phénomène d’accrétion de glace, par Petit-Schlusselhuber,Alice
Été 2020 - En codirection avec :
Conception d'un module sur un démonstrateur hybride-électrique, par Barberger,Jérémie
Été 2022 - En codirection avec : Dufresne, Louis
Étude par simulation numérique du rayonnement lié à la combustion dans un brûleur poreux, par Villanueva,Lucas
Été 2019
- En codirection avec : Lemaire, Romain
Mise au point d'un dispositif expérimental pour l'étude de flammes turbulentes, par Tempereau,Axel
Hiver 2023 - En codirection avec :
Effet des paramètres géométriques lors de la simulation d'un brûleur poreux à l'aide du logiciel Star-CUMM+, par Taibi,Ghiles
Automne 2015 - En codirection avec :
Étude paramétrique des différentes caractéristiques d'un brûleur poreux à l'aide du logiciel de simulation Star-CMM+, par Boumahdi,Lamia
Automne 2015 - En codirection avec :
Étude numérique de la production de gaz de synthèse à partir de méthane en milieu poreux : impact de la composition du mélange, par Samaran,Margaux
Hiver 2021
- En codirection avec :
Caractérisation expérimentale et numérique de la flamme de carburants synthétiques gazeux, par Ouimette,Pascale
Automne 2011 - En codirection avec : Mounaim-Rousselle, Christine
Potentiel de l'utilisation des mélanges hydrocarbures/alcools pour les moteurs à allumage commande, par Broustail,Guillaume
Automne 2011 - En codirection avec :
Impact de l'utilisation des stratégies d'injection multiple et de biodiesel sur un moteur diesel à rampe commune d'injection, par Plamondon,Etienne
Hiver 2015 - En codirection avec : Garnier, François
Formation du mélange par des stratégies d'injection simple et double en milieu non-évaporatif avec une approche LES, par Brulatout,Jonathan
Automne 2016 - En codirection avec :
Impact de la composition du syngas sur la vitesse de flamme et la stabilité du front de flamme, par Lapalme,Denis
Hiver 2017 - En codirection avec : Dufresne, Louis
Caractérisation des effets statique et transitoire de l'aiguille sur l'écoulement interne d'un injecteur diesel avec une approche LES, par Chouak,Mohamed
Hiver 2018 - En codirection avec : Lemaire, Romain
Étude expérimentale et numérique des processus de dévolatilisation et d'oxydation du charbon pulvérisé à fort gradient de chauffe sous air et sous atmosphères enrichies en oxygène, par Menage,Delphine
Automne 2018 - En codirection avec :
Étude de l'effet d'injection double sur le comportement d'un système d'injection directe de diesel à rampe commune, par Tétrault,Pascal
Été 2019 - En codirection avec : Garnier, François
Modélisation numérique de l'impact relié aux activités aériennes d'un grand aéroport international sur la qualité de l'air local, par Henry-Lheureux,Thomas
Hiver 2021 - En codirection avec :
Modélisation de l'injection de carb, par Lenice,Thomas
Automne 2024 - En codirection avec : Lemaire, Romain
Étude expérimentale des performances d'un moteur par diagnostic optique, par Billerot,Pierre-Lou
Été 2024 - En codirection avec : Moustapha, Saïd Hany
Hydrogen-Enriched Combustion Study at High Turbulence and Swirl Levels Inside a Gas Turbine Combustor, par Saleh,Mohamed Elbayoumi
Été 2022 - En codirection avec : Lemaire, Romain
Étude de l'impact de l'injection sur la combustion dans un moteur, par Thibault,Simon
Automne 2024
- En codirection avec :
Ingénieur système d’air Airbus Canada, par Petit-Schlusselhuber,Alice
Été 2020 - En codirection avec :
Concepteur dans le programme de propulsion hybride-électrique, par Barberger,Jérémie
Été 2022 - En codirection avec :
Prédictions thermoacoustiques de systèmes de combustion de turbines à gaz aérodérivées - Siemens Canada, par Cardet,Clément
Été 2019 - En codirection avec :
Stage analyse qualité, par David,Julianne
Hiver 2024
- En codirection avec :
Modélisation 0D/1D des émissions de particules de suie dans les turbines à gaz aéronautiques, par Giguet,Thibault
Été 2016 - En codirection avec :
Amélioration du processus d'installation de portes passager et de service, par David,Julianne
Hiver 2024
Publications
- Mykhailo Samoilenko, Patrice Seers, Patrick Terriault, Vladimir Brailovski. 2019 « Design, manufacture and testing of porous materials with ordered and random porosity: Application to porous medium burner ». Affiche présentée lors de la conférence : 2nd HI-AM Conference : Holistic Innovation In Additive Manufacturing (Vancouver, BC, Canada, June 26-27, 2019)
- Pierre-Lou Billerot, Pascal Tetrault, Romain Lemaire, Patrice Seers. 2023 « Parametric study of the impact of EGR and fuel properties on diesel engine performance using a predictive thermodynamic model ». International Journal of Engine Research vol. 24 , nº 4. p. 1464-1482
- Mohamed Elbayoumi, François Garnier, Patrice Seers. 2023 « Numerical study of the impact of hydrogen addition, swirl intensity and equivalence ratio on methane-air combustion ». International Journal of Turbo & Jet-Engines
- Yann Roussel, Pierre-Lou Billerot, Romain Lemaire, Patrice Seers. 2023 « Numerical study of the impact of tailored porous media design on syngas production from methane-rich combustion ». International Journal of Hydrogen Energy vol. 48 , nº 9. p. 3665-3677
- Pascal Tetrault, Patrice Seers. 2023 « A rate-of-injection model for predicting single and double injection with or without fusion ». International Journal of Engine Research
- Mohamed Chouak, Sebastien Cantin, Patrice Seers, François Garnier. 2022 « High-fidelity CFD modeling of pollutant dispersion from aircraft auxiliary power units (APUs) at a realistic airport and the effects on airport air quality ». Journal of Wind Engineering and Industrial Aerodynamics vol. 230
- Mohamed Chouak, Louis Dufresne, Patrice Seers. 2021 « Large eddy simulation of a double-injection cycle and the impact of the needle motion on the sac-volume flow characteristics of a single-orifice diesel injector ». International Journal of Engine Research vol. 22 , nº 8. p. 2464-2476
- Thomas Henry-Lheureux, Patrice Seers, Weeded Ghedhaïfi, François Garnier. 2021 « Overview of emissions at Montreal’s Pierre Elliott Trudeau international airport and impact of local weather on related pollutant concentrations ». Water, Air, and Soil Pollution vol. 232 , nº 5
- Pierre-Lou Billerot, Louis Dufresne, Romain Lemaire, Patrice Seers. 2020 « 3D CFD analysis of a diamond lattice-based porous burner ». Energy vol. 207
- Jonathan Brulatout, François Garnier, Patrice Seers. 2020 « Interaction between a diesel-fuel spray and entrained air with single- and double-injection strategies using large eddy simulations ». Propulsion and Power Research vol. 9 , nº 1. p. 37-50
- Mohamed Chouak, Louis Dufresne, Patrice Seers. 2019 « Single orifice diesel injector flow characterization and the impact of needle lift using large eddy simulation and proper orthogonal decomposition ». Journal of Fluids Engineering vol. 141 , nº 5
- Romain Lemaire, Amélie Boudreau, Patrice Seers. 2019 « Performance and emissions of a DISI engine fueled with gasoline/ethanol and gasoline/C-4 oxygenate blends – Development of a PM index correlation for particulate matter emission assessment ». Fuel vol. 241. p. 1172-1183
- E. Plamondon, P. Seers. 2019 « Parametric study of pilot–main injection strategies on the performance of a light-duty diesel engine fueled with diesel or a WCO biodiesel–diesel blend ». Fuel vol. 236. p. 1273-1281
- Mykhailo Samoilenko, Patrice Seers, Patrick Terriault, Vladimir Brailovski. 2019 « Design, manufacture and testing of porous materials with ordered and random porosity: application to porous medium burners ». Applied Thermal Engineering vol. 158
- Denis Lapalme, Fabien Halter, Christine Mounaim-Rousselle, Patrice Seers. 2018 « Characterization of thermodiffusive and hydrodynamic mechanisms on the cellular instability of syngas fuel blended with CH4 or CO2 ». Combustion and Flame vol. 193. p. 481-490
- Delphine Menage, Romain Lemaire, Patrice Seers. 2018 « Experimental study and chemical reactor network modeling of the high heating rate devolatilization and oxidation of pulverized bituminous coals under air, oxygen-enriched combustion (OEC) and oxy-fuel combustion (OFC) ». Fuel Processing Technology vol. 177. p. 179-193
- P. Tétrault, P. Seers. 2018 « Potential of a jet-induced shock wave to influence an upstream droplet cloud in compression-ignition engines using multiple injection strategies ». International Journal of Multiphase Flow vol. 101. p. 64-73
- Denis Lapalme, Romain Lemaire, Patrice Seers. 2017 « Assessment of the method for calculating the Lewis number of H2/CO/CH4 mixtures and comparison with experimental results ». International Journal of Hydrogen Energy vol. 42 , nº 12. p. 8314-8328
- Romain Lemaire, Delphine Menage, Patrice Seers. 2017 « Study of the high heating rate devolatilization of bituminous and subbituminous coals-Comparison of experimentally monitored devolatilization profiles with predictions issued from single rate, two-competing rate, distributed activation energy and chemical percolation devolatilization models ». Journal of Analytical and Applied Pyrolysis vol. 123. p. 255-268
- Yevgen Nazarenko, Sébastien Fournier, Uday Kurien, Rodrigo Benjamin Rangel-Alvarado, Oleg Nepotchatykh, Patrice Seers, Parisa A. Ariya. 2017 « Role of snow in the fate of gaseous and particulate exhaust pollutants from gasoline-powered vehicles ». Environmental Pollution vol. 223. p. 665-675
- Hui Wang, Lin Zhang, Guoliang Li, Kyle Rogers, Hongfei Lin, Patrice Seers, Thomas Ledan, Siauw Ng, Ying Zheng. 2017 « Application of uniform design experimental method in waste cooking oil (WCO) co-hydroprocessing parameter optimization and reaction route investigation ». Fuel vol. 210. p. 390-397
- J. Bisson, P. Seers, M. Huegel, F. Garnier. 2016 « Numerical prediction of gaseous aerosol precursors and particles in an aircraft engine ». Journal of Propulsion and Power vol. 32 , nº 4. p. 918-928
- Jonathan Brulatout, François Garnier, Christine Mounaïm-Rousselle, Patrice Seers. 2016 « Calibration strategy of diesel-fuel spray atomization models using a design of experiment method ». International Journal of Engine Research vol. 17 , nº 7. p. 713-731
- Sébastien Fournier, Guillaume Simon, Patrice Seers. 2016 « Evaluation of low concentrations of ethanol, butanol, BE, and ABE blended with gasoline in a direct-injection, spark-ignition engine ». Fuel vol. 181. p. 396-407
- Alexandre Pelletingeas, Louis Dufresne, Patrice Seers. 2016 « Characterization of flow structures in a diesel injector for different needle lifts and a fluctuating injection pressure ». Journal of Fluids Engineering vol. 138 , nº 8. p. 081105-081105
- Hafiz Laiq-Ur Rehman, Julien Weiss, Patrice Seers. 2016 « Effect of heat conduction on droplet life time and evaporation rate under forced convection at low temperatures ». Experimental Thermal and Fluid Science vol. 72. p. 59-66
- R. Lemaire, C. Bruhier, D. Menage, E. Therssen, P. Seers. 2015 « Study of the high heating rate devolatilization of a pulverized bituminous coal under oxygen-containing atmospheres ». Journal of Analytical and Applied Pyrolysis vol. 114 , nº July 2015. p. 22-31
- Romain Lemaire, Denis Lapalme, Patrice Seers. 2015 « Analysis of the sooting propensity of C-4 and C-5 oxygenates: Comparison of sooting indexes issued from laser-based experiments and group additivity approaches ». Combustion and Flame vol. 162 , nº 9. p. 3140-3155
- P. Seers, G. Nachin, M. Glaus. 2015 « Development of two driving cycles for utility vehicles ». Transportation Research Part D: Transport and Environment vol. 41. p. 377-385
- Simon Bruyère-Bergeron, Patrice Seers. 2014 « Relative importance of fuel properties on GDI fuel spray TIP penetration ». Transactions of the Canadian Society for Mechanical Engineering vol. 38 , nº 3. p. 347-358
- D. Lapalme, Patrice Seers. 2014 « Influence of CO2, CH4, and initial temperature on H2/CO laminar flame speed ». International Journal of Hydrogen Energy vol. 39 , nº 7. p. 3477-3486
- E. Plamondon, Patrice Seers. 2014 « Development of a simplified dynamic model for a piezoelectric injector using multiple injection strategies with biodiesel/diesel-fuel blends ». Applied Energy vol. 131. p. 411-424
- G. Broustail, F. Halter, P. Seers, G. Moréac, C. Mounaïm-Rousselle. 2013 « Experimental determination of laminar burning velocity for butanol/iso-octane and ethanol/iso-octane blends for different initial pressures ». Fuel vol. 106. p. 310-317
- Patrice Seers, Fabrice Foucher, Christine Mounaim-Rousselle. 2013 « Influence of O2-enriched intake air with CO2 dilution on the combustion process of an optically accessible spark-ignition engine ». International Journal of Engine Research vol. 14 , nº 1. p. 34-44
- G. Broustail, F. Halter, P. Seers, G. Moreac, C. Mounaim-Rousselle. 2012 « Comparison of regulated and non-regulated pollutants with iso-octane/butanol and iso-octane/ethanol blends in a port-fuel injection Spark-ignition engine ». Fuel vol. 94. p. 251-261
- G. Broustail, Patrice Seers, F. Halter, G. Moreac, C. Mounaim-Rousselle. 2011 « Experimental determination of laminar burning velocity for butanol and ethanol iso-octane blends ». Fuel vol. 90 , nº 1. p. 1-6
- J. Dernotte, C. Mounaim-Rousselle, F. Halter, Patrice Seers. 2010 « Evaluation of butanol-gasoline blends in a port fuel-injection, spark-ignition engine ». Oil & Gas Science and Technology = Revue de l'Institut Français du Pétrole vol. 65 , nº 2. p. 345-351
- Francis Morey, Patrice Seers. 2010 « Comparison of cycle-by-cycle variation of measured exhaust-gas temperature and in-cylinder pressure measurements ». Applied Thermal Engineering vol. 30 , nº 5. p. 487-491
- Frédéric Boudy, Patrice Seers. 2009 « Impact of physical properties of biodiesel on the injection process in a common-rail direct injection system ». Energy Conversion and Management vol. 50 , nº 12. p. 2905-2912
- Pascale Ouimette, Patrice Seers. 2009 « NOx emission characteristics of partially premixed laminar flames of H2/CO/CO2 mixtures ». International Journal of Hydrogen Energy vol. 34 , nº 23. p. 9603-9610
- Pascale Ouimette, Patrice Seers. 2009 « Numerical comparison of premixed laminar flame velocity of methane and wood syngas ». Fuel vol. 88 , nº 3. p. 528-533
- Patrice Seers, P. Terrier, Antoine Tahan, Marc Thomas. 2010 « Case Study : hybrid vehicles : the Honda insight and Toyota Prius : transition towards the automobile of the future? ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 83-109. Cambridge Scholars Publishing
- L. Bigot, P. Seers. 2022 « Impact of the spark plug boundary condition on the modelling of the spark discharge ignition of a CH4 – air mixture, ». Communication lors de la conférence : Combustion Institute – Canadian Section, Spring Technical Meeting (Ottawa, ON, Canada, May 16-19, 2022)
- Guillaume Nachin, Mathias Glaus, Patrice Seers. 2011 « Méthode pour un bilan dynamique des émissions polluantes associées à la mobilité routière ». Communication lors de la conférence : 79e Congrès de l’ACFAS (Sherbrooke, QC, Canada, 9-13 mai 2011)
- Pierre-Lou Billerot, Pascal Tétrault, Antoine Fleischmann, Romain Lemaire, Patrice Seers. 2023 « Non-evaporating kerosene fuel spray tip penetration: A comparison between phenomenological models and experiments ». Energy & Propulsion Conference & Exhibition (Greenville, SC, USA, Nov. 07-09, 2023) SAE International
- C. Rainville, R. Lemaire, P. Seers. 2022 « Analysis of the sooting propensity of a jet fuel surrogate blended with different oxygenated molecules ». Combustion Institute - Canadian Section, Spring Technical Meeting (Ottawa, ON, Canada, May 16-19, 2022)
- Y. Roussel, R. Lemaire, P. Seers. 2022 « Syngas production from rich methane combustion in porous media ». Combustion Institute - Canadian Section. Spring Technical Meeting (Ottawa, ON, Canada, May 16-19, 2022)
- J. H. Palacios-Ríos, S. Godbout, P. Brassard, D. Zegan, É Le Roux, M. C. Diaz-Acosta, P. Seers. 2019 « Catalytic cracking to optimize pyrolysis of plastic waste: Preliminary study ». Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition (AWMA) (Ville de Québec, QC, Canada, June 25-28, 2019) Air and Waste Management Association
- Pierre-Lou Billerot, Louis Dufresne, Patrice Seers. 2018 « 3D CFD modelling of a porous burner geometry ». Combustion Institute - Canadian Section. Spring Technical Meeting (Toronto, ON, Canada, May 14-17, 2018)
- Cyprien Jourdain, Julien Weiss, Patrice Seers. 2017 « Comparison of image preprocessing methods for fuel droplet characterization ». 47th AIAA Thermophysics Conference (Denver, CO, USA, June 05-09, 2017) AIAA
- J. Brulatout, F. Garnier, P. Seers. 2016 « Comparison between LES and experimental round jet for diesel fuel spray simulation ». 54th AIAA Aerospace Sciences Meeting, 4-8 Jan. 2016 (San Diego, CA, USA, Jan. 4-8, 2016) American Institute of Aeronautics and Astronautics
- Y. Nazarenko, S. Fournier, U. Kurien, R. B. Rangel-Alvarado, P. Seers, P. A. Ariya. 2016 « Effect of low ambient temperature and contact with snow on composition of dilute exhaust from a light-duty gasoline vehicle engine ». Proceedings of the Air and Waste Management Association's Annual Conference and Exhibition (New Orleans, LA, USA, June 20-23, 2016) Air and Waste Management Association
- Hafiz Laiq-Ur Rehman, Abdelouahab Mohammed-Taifour, Julien Weiss, Patrice Seers. 2016 « PLIF experiments on evaporating isolated droplet and droplets array ». 46th AIAA Thermophysics Conference (Washington, DC, USA, June 13-17, 2016) American Institute of Aeronautics and Astronautics
- Mohamed Chouak, Alexandre Mousseau, Damien Reveillon, Louis Dufresne, Patrice Seers. 2015 « Study of transient effects in the internal flow of a diesel fuel injector ». SAE 2015 World Congress and Exhibition (Detroit, MI, USA, Apr. 21-23, 2015) Society of Automotive Engineers
- Pascal Tetrault, Etienne Plamondon, Matthieu Breuze, Camille Hespel, Christine Mounaïm-Rousselle, Patrice Seers. 2015 « Fuel spray tip penetration model for double injection strategy ». SAE 2015 World Congress & Exhibition (Detroit, MI, USA, Apr. 21-23, 2015) Society of Automotive Engineers
- J. Brulatout, F. Garnier, P. Seers. 2013 « Atomization parameter influence on diesel spray ». 21st Annual Conference of the CFD Society of Canada (Sherbrooke, QC, Canada, May 06-09, 2013)
- Benoit Lacroix, Zhaoheng Liu, Patrice Seers. 2012 « A comparison of two control methods for vehicle stability control by direct yaw moment ». 2011 International Conference on Applied Mechanics, Materials and Manufacturing, ICAMMM (Shenzen, China, Nov. 18-20, 2011) Trans Tech Publications
- Denis Lapalme, Seers Patrice, Michael Johson, Clinton Groth, Omer Gulder. 2012 « Numerical and experimental determination of laminar flame speed of H2/CO/CO2/CH4 mixtures ». Combustion Institute Canadian Section Spring Technical Meeting (Toronto, ON, Canada, May 13-16, 2012)
- Denis Lapalme, Patrice Seers, Michael Johson. 2012 « CO and NOx predictions of syngas premixed combustion in a numerical perfectly stirred reactor ». Combustion Institute Canadian Section Spring Technical Meeting (Toronto, ON, Canada, May 13-16, 2012)
- A. Barnwal, M. R. J. Charest, C. P. T. Groth, Ö. L. Gülder, B. Rehel, Patrice Seers. 2011 « Premixed laminar flame properties of biogas and syngas alternative fuels as a function of composition and pressure ». Combustion Institute Canadian Section Spring Technical Meeting (Manitoba, Canada, May 8-11, 2011)
- G. Broustail, F. Halter, Patrice Seers, G. Moréac, C. Mounaïm-Rousselle. 2011 « Experimental determination of laminar burning velocity for butanol/iso-octane and ethanol/iso-octane blends as a function of initial pressure ». Fifth European Combustion Meeting (Cardiff, UK, June 29-July 1, 2011)
- Jason Davis, Marcus Ashford, Semih Olcmen, Patrice Seers, Mebougna Drabo. 2011 « Unsteady flow analysis in a fired briggs-stratton internal combustion engine ». 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition (Orlando, FL, USA, Jan. 4-7, 2011) American Institute of Aeronautics and Astronautics
- Xavier Landry, Patrice Seers, Simon Bruyère-Bergeron. 2011 « Comparison of three evaporation models combined to the distillation curve model for multicomponent fuel droplet evaporation ». 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition (Orlando, FL, USA, Jan. 4-7, 2011) American Institute of Aeronautics and Astronautics
- William Thomas, Simon Bruyère-Bergeron, Patrice Seers. 2011 « Determination of fuel droplet evaporation based on multiple thermocouple sizes ». 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition (Orlando, FL, USA, Jan. 4-7, 2011) American Institute of Aeronautics and Astronautics
- Pascale Ouimette, Patrice Seers. 2009 « Comparaison des émissions de NOx du CH4 et d'un mélange H2/CO/CO2 ». IXe Colloque Inter-Universitaire Franco-Québécois (CIFQ) sur la Thermique des Systèmes : Comptes Rendus (Lille, France, 18-20 mai 2009)
- Pascale Ouimette, Patrice Seers. 2009 « Influence of burner diameter and fuel type on EINOx of diffusion flame ». 6th Mediterranean Combustion Symposium (Ajaccio, Corse, France, June 7-11, 2009) The Combustion Institute and the International Centre for Heat and Mass Transfer (ICHMT)
- Patrice Seers, V. Reguillet, E. Plamondon, Louis Dufresne, Stéphane Hallé. 2008 « Evaporation time of gasoline and diesel fuel droplets on a hot plate : the influence of fuel deposits ». ASME International Mechanical Engineering Congress and Exposition (IMECE) (Boston, MA, USA, Oct. 31-Nov. 6, 2008) American Society of Mechanical Engineers
- F. Morey, Patrice Seers, D. Gardiner. 2007 « Comparison of the cyclic variability of an exhaust gas temperature sensor and in-cylinder pressure measurements ». ASME/IEEE Joint Rail Conference and the ASME Internal Combustion Engine Division, Spring Technical Conference (JRC/ICE) (Pueblo, CO, USA, March 13-16, 2007) American Society of Mechanical Engineers
- Françis Morey, Patrice Seers. 2007 « Étude de la variation cyclique des températures d'échappement d'un moteur à allumage commandé ». VIIIe colloque interuniversitaire franco-québécois : thermique des systèmes : actes : Montréal mai 2007 (Montréal, QC, Canada, 28-30 mai 2007) École de technologie supérieure ; Ressources naturelles du Canada
- Jonathan Boisvert, Thibaut Bellizzi, Henri Champliaud, Patrice Seers. 2006 « Print depth prediction in hot forming process with a reconfigurable die ». ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
- Jonathan Boisvert, Henri Champliaud, Thibaut Bellizzi, Patrice Seers. 2006 « Simulation and optimisation of a reconfigurable discrete die for the hot forming of thick steel plates in hydro power industry ». ANSYS Conference and Exhibition (Pittsburgh, PA, USA, May 2-4, 2006)
- Benoît Lacroix, Patrice Seers, Zhaoheng Liu. 2006 « A passive nonlinear damping design for a road race car application ». Non-Conference Specific Technical Papers - 2006 (Warrendale, PA, USA, Dec., 2006) SAE International
- Benoît Lacroix, Patrice Seers, Zhaoheng Liu. 2006 « Race car suspension design with a nonlinear damping ». Compte rendu 24ième séminaire sur la vibration des machines : ACVM, 25-27 octobre 2006 (Montreal, QC, Canada, Oct. 25-27, 2006) CMVA
- P. Terrier, P. Seers, H. Champliaud. 2005 « Comparison of emissions and fuel consumption between gasoline and E85 in a simulated hybrid electric vehicle ». Powertrain & Fluid Systems Conference and Exhibition (San Antonio, TX, USA, Oct. 24-27, 2005) SAE International
- Patrice Seers. 1997 « Optimization and improvement of an actual car propane system ». International Congress and Exposition (Detroit, MI, USA, Feb. 24-27, 1997) SAE