Hakim Bouzid
Professeur
Département
Département de génie mécanique
Formation
B.Sc. (Nottingham, G.-B.), M.Sc. (Leeds, G.-B.), Ph.D. (Polytechnique Montréal)
Bureau
A-1902
Courriel
Axes de recherche
- Aéronautique et aérospatiale
- Matériaux innovants et fabrication avancée
- Technologies de la santé
- Développement durable, économie circulaire et enjeux environnementaux
Expertises
- Étanchéité statique et dynamique
- Joints, garnitures et tresses de presse étoupe
- Analyse des contraintes
- Analyse des réservoirs sous pression
- Analyse des structures par éléments finis
- Tribologie (lubrification, frottement et usure)
- Comportement non linéaire des structures
- Plasticité, fluage et relaxation
- Sécurité et contrôle des risques industriels
Encadrements
- Développement d'une méthode de conception des assemblages à brides boulonnées basée sur la flexibilité et l'étanchéité, par Hichem Beghoul
Automne 2003 - Effet de l'expansion thermique sur la redistribution des charges dans les assemblages à brides boulonnées, par Akli Nechache
Automne 2002
- Détermination de la largeur effective des joints d'étanchéité utilisée dans code ASME pour le calcul des brides, par Mohammed Diany
Été 2005 - Analyse des assemblages à brides boulonnées à face plate, par Hichem Galai
Hiver 2009 - En codirection avec : Sylvie Nadeau
Mécanisme de la hernie discale : modélisation non-linéaire, par David Prud'Homme
Automne 2007 - Évaluation du gradient thermique circonférentiel et son influence sur les déflexions d'un assemblage à brides boulonnées d'un échangeur de chaleur avec plusieurs passes, par Natalia Petrova
Hiver 2010
- Effet de l'espacement des boulons sur la distribution des contraintes dans un assemblage à brides boulonnées muni d'un joint d'étanchéité, par Mustapha M'Hadheb
Été 2005
- Modélisation du phénomène de fluage-relaxation dans les assemblages à brides boulonnées munis de joint d'étanchéité, par Akli Nechache
Automne 2007
- Caractérisation et modélisation des garnitures de presse-étoupe, par Mohammed Diany
Automne 2010 - Analyse des contraintes résiduelles dans les assemblages tubes-plaques à tubes dudgeonnés par pression hydraulique., par Nor Eddine Laghzale
Automne 2009 - En codirection avec : Hakim A. Bouzid
The effect of bolt spacing on the tightness behavior of bolted flange joints, par Tan Dan Do
Hiver 2012 - Prédiction des fuites gazeuses et des fuites liquides dans les joints d'étanchéité micro et nanoporeux, par Lotfi Grine
Automne 2012 - En codirection avec : Hakim A. Bouzid
Développement d'un modèle analytique anisotrope non linéaire du disque intervertébral L5-S1, par Sébastien Demers
Été 2015 - En codirection avec : Jean-François Chatelain
On the Characterization of Johnson-Cook Constants : Numerical and Expérimental Study of High Speed Machining Aerospace Alloys, par Monzer Daoud
Automne 2016 - Characterization and Modeling of Packed-stuffing Boxes, par Mehdi Kazeminia
Automne 2016 - En codirection avec : Hakim A. Bouzid
Analysis of Fiber Reinforced Plastic Bolted Flange Joints, par Ali Khazraiyanvafadar
Été 2019 - CREEP and Thermal Ratcheting of Soft Materials under Compression, par Rahul Palaniappan Kanthabhabha Jeya
Automne 2018 - Prediction of Gas and Liquid Leak Rates in Compression Packing at Room Temperature, par Ali Salah Omar Aweimer
Automne 2019 - Stress Analysis of Finned Tubes Subjected to Die Expansion, par Zijian Zhao
Automne 2023 - En codirection avec : Hakim A. Bouzid
Maîtrise des risques des réservoirs sous pression, par Mohamed Esouilem
Hiver 2024 - A Study of Parameters Affecting the Self-loosening of Bolted Joints, par Rashique Iftekhar Rousseau
Automne 2024 - En codirection avec : Lucas Abia Hof
Corrosion Quantification of Bolted Flanged Gasketed Joints, par Soroosh Hakimian
Automne 2024 - Creep-Relaxation of Metal-to-metal Contact Bolted Flange Joints, par Beatus Iroakazi
Été 2024 - En codirection avec : Hakim A. Bouzid
A Study of the Performance of Mechanical and Hydraulic Expansion of Tube-to-Tubesheet Joints, par Mohammadhossein Pourreza Katigari
Automne 2024
- En codirection avec : Hakim A. Bouzid
Conception d'ancrage pour éolien flottant, par Victor Benifla
Été 2020 - En codirection avec : Jean-Luc Fihey
Implantation d'un programme du contrôle de la qualité formelle dans une entreprise oeuvrant dans le domaine de la fabrication des appareils sous pression soudés, par Yashar Nosrat Makouee
Été 2018
- Amélioration d'un banc d'essai de presse-étoupe et essais préliminaires de fluage à haute température des garnitures d'étanchéité en graphite expansé, par Carl Maillé
Automne 2021 - Test rig and experimentation of packing seals used in large diameter deformed rotating drums, par Jonathan Villiard
Automne 2010 - Amélioration de la procédure d'éclatement des joints d'étanchéité, par Samir Benabdallah
Été 2012 - The Prediction of Liquid Leak Rates Through Packing Seals, par Seyed Amir Hossein Bathaei
Automne 2021 - En codirection avec : Mohammad Jahazi
Conception et fabrication d’un banc d’essai pour la mesure du coefficient de friction haute température des alliages d’aluminium, par Guillaume David
Hiver 2021 - Stress Analysis of Bolted Flange Joints with Different Shell Connections, par Mohammad Choulaei
Automne 2022 - Effect of Temperature on the Relaxation of Polyvinyl Chloride Flanges, par Zijian Zhao
Été 2017 - Analytical and Finite of Element Study of Residual Stresses in the Transition Zone of Hydraulically Expended Tube-to-tubesheet Joints, par Mohammadhossein Pourreza Katigari
Hiver 2018 - Development of a Test Bench to Study Self-Loosening of Bolted Joints, par Amir Hasrak
Été 2018 - En codirection avec : Hakim A. Bouzid
Étude de l'autodesserrage des assemblages boulonnés, par Valentin Fort
Été 2018 - Caractérisation mécanique des tresses de valves à haute température, par Xavier Legault
Automne 2018 - A Theoretical Numerical and Experimental Study of Bolted Flange Joints Subjected to Hot Torquing, par Ali Tofighi
Été 2024 - En codirection avec : Hakim A. Bouzid
Étude de l'auto-desserrage des assemblages boulonnées en composite, par Ali Yaya Achimou
Été 2024 - Stress Analysis of ASME B16.5 Class 900 Bolted Flange Joints Subjected to Bolt-up and Pressure, par Abdul Fattah Alarnous
Été 2023
- En codirection avec : Hakim A. Bouzid
Quantification de la corrosion dans les assemblages à brides boulonnées munis de joints d'étanchéité, par Rafael Renan Dos Santos Barreto
Hiver 2020 - Étude expérimentale du taux de fuite d'un joint en graphite flexible, par Abou Bakr Larbi
Automne 2011 - Analyse par la méthode des éléments finis de l'influence du dudgeonnage sur les contraintes résiduelles dans une plaque à tube, par Nabil Rezzak
Hiver 2017 - En codirection avec : Anh Dung Ngô
Étude de l'auto-desserrage en mode de déplacement contrôlé des joints boulonnés en PEHD et en acier, par Youssef Ramzi
Été 2023 - En codirection avec : Anh Dung Ngô
Influence de la température et de la contrainte appliquée sur le comportement de fluage en tension du polypropylène/polyoléphine (PP/POE) et des deux composites PP/POE/bio-carbone/verre et PP/POE/bio-carbone/carbone - Étude expérimentale, par Ouroud Chemlal
Été 2024 - Analyse des risques des réservoirs de stockage à toit flottant externe, par Mohamed Salah Yahiaoui
Été 2024 - En codirection avec : Anh Dung Ngô
Modélisation et analyse par éléments finis des joints à brides boulonnées en polymères renforcés de fibres de verre (PRFV), par Youssef Boutahar
Été 2023 - Modélisation théorique des assemblages à brides boulonnées en plastique renforcé de fibres munis de joints d'étanchéité, par Lucas Cizeron
Hiver 2019 - Analyse des contraintes dans les assemblages à brides boulonnées en composite, par Amara Sellah
Automne 2024 - Étude du fluage-relaxation des brides en composites, par Hildegarde Valentin
Hiver 2021 - En codirection avec : Anh Dung Ngô
Étude expérimentale sur l'auto-desserrage en mode de déplacement contrôlé de joint boulonné en stratifié de composite, par Fabrice Jean
Automne 2024 - En codirection avec : Anh Dung Ngô
Auto-desserrage de joints boulonnés en acier et en polyéthylène à haute densité (PEHD), par Gilles Arnaud Missouma Ndzana
Été 2024
- En codirection avec : Jean Arteau
Analyse d'un système de support latéral pour les escabeaux assurant leur stabilité lors d'une force maximale de poussée, par Jorge Ramon Garcia Romero
Hiver 2017 - Prédiction des contraintes résiduelles dues à l'expansion par écrouissage à froid de trous dans les plaques d'alliage d'aluminium, par Hacène Touahri
Hiver 2018
Publications
- Sylvie Nadeau, Stéphane Hallé, Jean Arteau, B. Ateme-Nguema, A. Badri, Christian Belleau, Hakim Bouzid, M. Debia, B. Emami-Mehrgani, Frédéric Laville, François Morency, Anh Dung Ngô, Yvan Petit, Jérémie Voix. 2013 « Quand la vulgarisation scientifique reprend ses lettres de noblesse: le cas de l'EREST ». Affiche présentée lors de la conférence : Journée Découverte, École de technologie supérieure (Montréal, QC, Canada, 13 mars 2013)
- Hakim Bouzid, Nor Eddine Laghzale. 2009 « Analytical modeling of tube-to-tubesheet joints sujected to plasticity and creep ». Affiche présentée lors de la conférence : 6th CNS International Steam Generator Conference (Toronto, Canada, Nov. 8-11, 2009)
- Anh Dung Ngô, Stéphane Hallé, Sylvie Nadeau, P. Déry, P. Doucet, R. Gilbert, L. Gratton, Jean Arteau, Hakim Bouzid, J. Brousseau, P. Dessureault, F. Gauthier, Frédéric Laville, P. Le Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas. 2007 « Le défi de l'intégration des connaissances en santé et en sécurité du travail - génie mécanique ». Travail et Santé vol. 23 , nº 4. p. 36-39
- Meriem Belhaou, Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2024 « Residual stresses in autofrettaged functionally graded pressurized thick cylinders ». International Journal of Pressure Vessels and Piping vol. 208
- Khaled Benfriha, Oussama Adjoul, Abdel-Hakim Bouzid, Peter Wardle. 2024 « Interactive design on the product life cycle costs: a case study ». International Journal on Interactive Design and Manufacturing vol. 18 , nº 2. p. 837-846
- Abdel-Hakim Bouzid, Sofiane Bouzid, Khaled Benfriha. 2024 « On the strength and tightness of ASME B16.5 and B16.47 series a standard flanges ». Journal of Pressure Vessel Technology vol. 146 , nº 1
- Soorosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « An improved fixture to quantify corrosion in bolted flanged gasketed joints ». Journal of Pressure Vessel Technology vol. 146 , nº 1
- Soorosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « Effect of gap size on flange face corrosion ». Materials and Corrosion-Werkstoffe Und Korrosion
- Soorosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « Effect of gasket material on flange face corrosion ». International Journal of Pressure Vessels and Piping vol. 209
- Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « Corrosion failures of flanged gasketed joints: A review ». Journal of Advanced Joining Processes vol. 9
- Rashique Iftekhar Rousseau, Abdel-Hakim Bouzid, Zijian Zhao. 2024 « On the re-evaluation of the clamped members stiffness of bolted joints ». Transactions of the Canadian Society for Mechanical Engineering vol. 48 , nº 1. p. 75-83
- Zijan Zhao, Abdel-Hakim Bouzid. 2024 « A study on the contact quality improvement of fin to tube assemblies ». Transactions of the Canadian Society for Mechanical Engineering vol. 48 , nº 2. p. 173-182
- Zijan Zhao, Abdel-Hakim Bouzid, Nor Eddine Laghzale. 2024 « Plastically deformed tubes subjected to mechanical expansion processes ». Materials vol. 17 , nº 11
- Samiha Zrinej, Nor-Eddine Laghzale, Abdel Hakim A. Bouzid. 2024 « Elastic-plastic stress analysis of shrink-fitted thick FGM cylinders ». FME Transactions vol. 52 , nº 3. p. 371-381
- Abdel-Hakim Bouzid, Shubhra Kanti Das. 2023 « Long-term performance of semimetallic gaskets ». Journal of Nuclear Engineering and Radiation Science vol. 9 , nº 3
- Sofiane Bouzid, Abdel-Hakim Bouzid, Anh-Dung Ngo. 2023 « Stress analysis of ASME section X flanges using classical lamination theory ». Journal of Pressure Vessel Technology vol. 145 , nº 3
- Quentin Charrier, Nisar Hakam, Khaled Benfriha, Vincent Meyrueis, Cyril Liotard, Abdel-Hakim Bouzid, Améziane Aoussat. 2023 « Towards the augmentation of digital twin performance ». Sensors vol. 23 , nº 22
- Soroosh Hakimian, Shamim Pourrahimi, Abdel-Hakim Bouzid, Lucas A. Hof. 2023 « Application of machine learning for the classification of corrosion behavior in different environments for material selection of stainless steels ». Computational Materials Science vol. 228
- Shamim Pourrahimi, Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2023 « On the use of machine learning algorithms to predict the corrosion behavior of stainless steels in lactic acid ». Metals vol. 13 , nº 8
- Dinu Thomas Thekkuden, Abdel-Hamid Ismail Mourad, Abdel-Hakim Bouzid, Muhammad M. Sherif. 2023 « Investigation of expansion percentages and groove inclusions on the performance of welded, expanded, welded-expanded tube-to-tubesheet joints ». Journal of Materials Research and Technology vol. 22. p. 2078-2092
- Zijan Zhao, Abdel-Hakim Bouzid, Linbo Zhu. 2023 « A method of evaluating the driving force and stresses during tube die expansion ». Journal of Pressure Vessel Technology vol. 145 , nº 2
- Samiha Zrinej, Nor Eddine Laghzale, Hakim A. Bouzid. 2023 « Analytical modeling of shrink-fitted FGM thick-walled cylinders ». International Journal of Engineering Research in Africa vol. 66. p. 61-74
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid. 2022 « On the modeling of gas and liquid leaks through packed glands ». Journal of Pressure Vessel Technology vol. 144 , nº 5
- Meriem Belhaou, Nor Eddine Laghzale, Hakim Bouzid. 2022 « Analysis of plastically deformed functionally graded pressurized thick cylinder ». Arab Journal of Basic and Applied Sciences vol. 29 , nº 1. p. 372-381
- Meriem Belhaou, Nor Eddine Laghzale, Hakim Bouzid. 2022 « Residual stress in ceramic–metal tubes: Elastic–ideally plastic model analysis ». International Journal of Engineering Trends and Technology vol. 70 , nº 9. p. 400-410
- Mohamed Esouilhem, Abdel-Hakim Bouzid, Sylvie Nadeau. 2022 « Pressure vessels and piping accident analysis and prevention: A case study in Canada ». International Journal of Safety and Security Engineering vol. 12 , nº 1. p. 105-114
- Soroosh Hakimian, Lucas Hof, Hakim A. Bouzid. 2022 « Investigation of corrosion in bolted flanged joints using a novel experimental setup ». ECS Meeting Abstracts vol. MA2022-01 , nº 16. p. 990
- Amal Mouâa, Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2022 « Creep analysis of plastically deformed shrink-fitted joints ». Arabian Journal for Science and Engineering vol. 47. p. 8199-8210
- Dinu Thomas Thekkuden, Abdel-Hamid Ismail Mourad, Tholkappiyan Ramachandran, Abdel-Hakim Bouzid, Ravi Kumar, Ahmed Alzamly. 2022 « Combined effect of tungsten inert gas welding and roller expansion processes on mechanical and metallurgical characteristics of heat exchanger tube-to-tubesheet joints ». Journal of Materials Research and Technology-Jmr&T vol. 21. p. 4724-4744
- Zijian Zhao, Abdel-Hakim Bouzid, Nor Eddine Laghzale. 2022 « Analysis of stresses and strains in stainless steel 316 L tubes subjected to die expansion ». Journal of Pressure Vessel Technology vol. 144 , nº 5
- Khaled Benfriha, Chawki El-Zant, Quentin Charrier, Abdel-Hakim Bouzid, Peter Wardle, Idir Belaidi, Stéphane Loubère, Nooshin Ghodsian, Améziane Aoussat. 2021 « Development of an advanced MES for the simulation and optimization of industry 4.0 process ». International Journal for Simulation and Multidisciplinary Design Optimization vol. 12
- Abdel-Hakim Bouzid, Hacène Touahri, Khaled Benfriha. 2021 « Analytical solution of aluminum alloy plates with holes subjected to cold expansion with reverse yielding ». Journal of Pressure Vessel Technology vol. 143 , nº 4
- Abdel-Hakim Bouzid, Ali Khazraiyan Vafadar, Anh Dung Ngô. 2021 « On the modeling of anisotropic fiber-reinforced polymer flange joints ». Journal of Pressure Vessel Technology vol. 143 , nº 6
- Adbel-Hakim Bouzid. 2021 « A study on liquid leak rates in packing seals ». Applied Sciences vol. 11 , nº 4
- Amal Mouaa, Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2021 « Analytical modelling of interference fit joints with power law strain-hardening behavior ». International Review on Modelling and Simulations vol. 14 , nº 1. p. 24-31
- Dinu Thomas Thekkuden, Abdel-Hamid Ismail Mourad, Abdel-Hakim Bouzid. 2021 « Failures and leak inspection techniques of tube-to-tubesheet joints: A review ». Engineering Failure Analysis vol. 130
- Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2021 « A method to reduce the number of assembly tightening passes in bolted flange joints ». Journal of Manufacturing Science and Engineering vol. 143 , nº 12
- Mikel Armentia, Mikel Abasolo, Ibai Coria, Abdel-Hakim Bouzid. 2020 « On the use of a simplified slip limit equation to predict screw self-loosening of dental implants subjected to external cycling loading ». Applied Sciences vol. 10 , nº 19
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Zijian Zhao. 2020 « Leakage estimate in nonuniformly compressed packing rings ». Journal of Nuclear Engineering and Radiation Science vol. 6 , nº 2
- M. Esouilem, H. A. Bouzid, S. Nadeau. 2020 « Frequency failure causes analysis of pressure vessel and piping equipment: case study of the Alberta Petrochemical Industry ». ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part B: Mechanical Engineering vol. 6 , nº 4
- Rahul Palaniappan Kanthabhabha Jeya, Zijian Zhao, Abdel-Hakim Bouzid. 2020 « Creep-relaxation modeling of HDPE and polyvinyl chloride bolted flange joints ». Journal of Pressure Vessel Technology vol. 142 , nº 5
- Ali Khazraiyan Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngô. 2020 « Analytical modeling of FRP hubbed flanges ». International Journal of Pressure Vessels and Piping vol. 188
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid. 2019 « Evaluation of interfacial and permeation leaks in gaskets and compression packing ». Journal of Nuclear Engineering and Radiation Science vol. 5 , nº 1
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Mehdi Kazeminia. 2019 « Predicting leak rate through valve stem packing in nuclear applications ». Journal of Nuclear Engineering and Radiation Science vol. 5 , nº 1
- Abdel-Hakim Bouzid, Ali Salah Omar Aweimer. 2019 « On the use of gas flow models to predict leak rates through sheet gasket materials ». Journal of Pressure Vessel Technology vol. 141 , nº 5
- Abdel-Hakim Bouzid, Mohammad Pourreza. 2019 « Analysis of residual stresses in the transition zone of tube-to-tubesheet joints ». Journal of Pressure Vessel Technology vol. 141 , nº 4
- Valentin Fort, Abdel-Hakim Bouzid, Michel Gratton. 2019 « Analytical modeling of self-loosening of bolted joints subjected to transverse loading ». Journal of Pressure Vessel Technology vol. 141 , nº 3
- Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2019 « Effect of thermal ratcheting on the mechanical properties of Teflon and fiber based gasket materials ». Journal of Applied Polymer Science vol. 136 , nº 13
- Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2019 « Influence of thermal ratcheting on the creep and mechanical properties of high-density polyethylene ». Journal of Engineering Materials and Technology vol. 141 , nº 4
- Abdel-Hakim Bouzid, L.inbo Zhu. 2018 « A study of neighbouring tube expansion effect on the residual contact pressure of tube-to-tubesheet joints ». International Journal of Pressure Vessels and Piping vol. 165. p. 185-192
- Ibai Coria, Iñigo Morales Martín, Abel-Hakim Bouzid, Iker Heras, Mikel Abasolo. 2018 « Efficient assembly of bolted joints under external loads using numerical FEM ». International Journal of Mechanical Sciences vol. 142-143. p. 575-582
- Rahul Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2018 « Compression creep and thermal ratcheting behavior of High Density Polyethylene (HDPE) ». Polymers vol. 10 , nº 2
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2018 « Leak prediction through porous compressed packing rings: A comparison study ». International Journal of Pressure Vessels and Piping vol. 166. p. 1-8
- Linbo B. Zhu, Abdel-Hakim Bouzid, Jun Hong, Zaoxiao Zhang. 2018 « Elastic interaction in bolted flange joints: An analytical model to predict and optimize bolt load ». Journal of Pressure Vessel Technology vol. 140 , nº 4. p. 10
- Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2018 « Analytical evaluation of elastic interaction in bolted flange joints ». International Journal of Pressure Vessels and Piping vol. 165. p. 176-184
- M. Daoud, J. F. Chatelain, A. Bouzid. 2017 « Effect of rake angle-based Johnson-Cook material constants on the prediction of residual stresses and temperatures induced in Al2024-T3 machining ». International Journal of Mechanical Sciences vol. 122. p. 392-404
- Sébastien Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2017 « Analytical evaluation of stresses and displacements of an intervertebral disc ». Journal of Biomechanical Science and Engineering vol. 12 , nº 3
- Palaniappan Rahul Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017 « Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ». Advanced Materials proceeding vol. 2 , nº 10. p. 609-614
- Mehdi Kazeminia, Hakim Bouzid. 2017 « Evaluation of leakage through graphite-based compression packing rings ». Journal of Pressure Vessel Technology vol. 139 , nº 1
- Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2017 « Numerical and experimental study of elastic interaction in bolted flange joints ». Journal of Pressure Vessel Technology vol. 139 , nº 2
- Hocine Attoui, Abdel-Hakim Bouzid, Jerry A. Waterland. 2016 « On the buckling of spiral wound gaskets ». Journal of Pressure Vessel Technology vol. 138 , nº 4
- Abdel-Hakim Bouzid, Mehdi Kazeminia. 2016 « Effect of reverse yielding on the residual contact pressure in tube-to-tubesheet joints ». Journal of Pressure Vessel Technology vol. 138 , nº 6
- Abdel-Hakim Bouzid, Nor-Eddine Laghzale. 2016 « Analytical modeling of tube-to-tubesheet joints subjected to plastic deformation and creep ». Journal of Advanced Mechanical Design, Systems and Manufacturing vol. 10 , nº 4
- Abdel-Hakim Bouzid, Abdel-Hamid I. Mourad, Aly El Domiaty. 2016 « Influence of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ». International Journal of Pressure Vessels and Piping vol. 146. p. 1-10
- Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2016 « Effect of Sharpey's fibers on the stress distribution in the anulus fibrosus of an intervertebral disc subjected to compression ». International Review on Modelling and Simulations vol. 9 , nº 6. p. 414-426
- Sébastien Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2016 « Anisotropic multishell analytical modeling of an intervertebral disk subjected to axial compression ». Journal of Biomechanical Engineering vol. 138 , nº 4
- Noreddine Laghzale, Hakim Bouzid. 2016 « Analytical modelling of elastic-plastic interference fit joints ». International Review on Modelling and Simulations vol. 9 , nº 3. p. 191-199
- A. H. Bouzid, A. H. I. Mourad, A. El Domiaty. 2015 « Impact of Bauschinger effect on the residual contact pressure of hydraulically expanded tube-to-tubesheet joints ». Procedia Engineering vol. 130. p. 176-192
- Hakim Bouzid, S. Benabdallah. 2015 « Characterization of PTFE-based gaskets at high temperature ». Journal of Pressure Vessel Technology vol. 137 , nº 3
- M. Daoud, J. F. Chatelain, A. Bouzid. 2015 « Effect of rake angle on Johnson-Cook material constants and their impact on cutting process parameters of Al2024-T3 alloy machining simulation ». International Journal of Advanced Manufacturing Technology vol. 81 , nº 9-12. p. 1987-1997
- M. Daoud, W. Jomaa, J. F. Chatelain, A. Bouzid. 2015 « A machining-based methodology to identify material constitutive law for finite element simulation ». International Journal of Advanced Manufacturing Technology vol. 77 , nº 9-12. p. 2019-2033
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2015 « Prediction of gas flow in compressible and low permeability porous media ». Journal of Fluid Science and Technology vol. 10 , nº 2
- Mehdi Kazeminia, Hakim Bouzid. 2015 « Stress analysis of packed stuffing-boxes ». Journal of Pressure Vessel Technology vol. 137 , nº 5
- Abdel-Hakim Bouzid. 2014 « Comparative study of bolt spacing formulas used in bolted joint designs ». International Journal of Pressure Vessels and Piping vol. 120-121 , nº 1. p. 47-54
- Adbel-Hakim Bouzid. 2014 « Failure analysis of an aluminium extension portable ladder ». Materials Sciences and Applications vol. 5 , nº 9. p. 674-684
- Tan Dan Do, Abdel-Hakim Bouzid, Thien-My Dao. 2014 « Development of a new bolt spacing formula ». Journal of Pressure Vessel Technology vol. 136 , nº 1
- Mehdi Kazemina, Abdel-Hakim Bouzid. 2014 « Effect of tapered housing on the axial stress distribution in a stuffing box packing ». International Journal of Advancements in Mechanical and Aeronautical Engineering vol. 1 , nº 3. p. 115-120
- Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2013 « On the modeling of an intervertebral disc using a novel large deformation multi-shell approach ». Journal of Biomechanical Engineering vol. 135 , nº 5
- Lotfi Grine, Abdel-Hakim Bouzid. 2013 « Analytical and experimental studies of liquid and gas leaks through micro and nano-porous gaskets ». Materials Sciences and Applications vol. 4 , nº 8A. p. 32-44
- Lotfi Grine, Abdel-Hakim Bouzid. 2013 « Prediction of leak rates through porous gaskets at high temperature ». Journal of Pressure Vessel Technology vol. 135 , nº 2
- Nazim Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2013 « On the use of shape memory alloy studs to recover load loss in bolted joints ». Journal of Pressure Vessel Technology vol. 135 , nº 2
- Mohammed Diany, Abdel-Hakim Bouzid. 2012 « Creep constitutive law of packing materials based on relaxation tests ». Journal of Tribology vol. 134 , nº 1
- Tan Dan Do, Hakim Bouzid, Thien-My Dao. 2012 « On the Use of Theory of Rings on Nonlinear Elastic Foundation to Study the Effect of Bolt Spacing in Bolted Flange Joints ». Journal of Pressure Vessel Technology vol. 134 , nº 6
- Natalia Petrova, Abdel-Hakim Bouzid. 2012 « Deflections of a multipass shell-and-tube heat exchanger bolted joint subjected to nonaxisymmetric thermal loading ». Journal of Pressure Vessel Technology vol. 134 , nº 1
- Hakim Bouzid, Hichem Galai. 2011 « A new approach to model bolted flange joints with full face gaskets ». Journal of Pressure Vessel Technology vol. 133 , nº 2
- S. Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2011 « Étude analytique des zones critiques du disque intervertébral L5-S1 soumis à une compression quasi statique ». Travail et Santé vol. 27 , nº 4. p. 23
- Mohammed Diany, Hakim Bouzid. 2011 « An experimental-numerical procedure for stuffing box packing characterization and leak tests ». Journal of Tribology vol. 133 , nº 1
- Tan Dan Do, Hakim Bouzid, Thien-My Dao. 2011 « Effect of bolt spacing on the circumferential distribution of the gasket contact stress in bolted flange joints ». Journal of Pressure Vessel Technology vol. 133 , nº 4
- Lotfi Grine, Hakim Bouzid. 2011 « Correlation of gaseous mass leak rates through micro- and nanoporous gaskets ». Journal of Pressure Vessel Technology vol. 133 , nº 2
- Lotfi Grine, Hakim Bouzid. 2011 « Liquid leak predictions in micro- and nanoporous gaskets ». Journal of Pressure Vessel Technology vol. 133 , nº 5
- Hakim Bouzid, Akli Nechache. 2010 « The modelling of bolted flange joints used with disc springs and tube spacers to reduce relaxation ». International Journal of Pressure Vessels and Piping vol. 87 , nº 12. p. 730-736
- Hichem Galai, Hakim Bouzid. 2010 « Analytical modeling of flat face flanges with metal-to-metal contact beyond the bolt circle ». Journal of Pressure Vessel Technology vol. 132 , nº 6. p. 0612071-0612078
- Nor Eddine Laghzale, Hakim Bouzid. 2010 « Effect of creep on the residual stresses in tube-to-tubesheet joints ». Journal of Pressure Vessel Technology vol. 132 , nº 6. p. 0612101-0612106
- Hakim Bouzid. 2009 « On the effect of external bending loads in bolted flange joints ». Journal of Pressure Vessel Technology vol. 131 , nº 2
- Mohammed Diany, Hakim Bouzid. 2009 « Analytical evaluation of stresses and displacements of stuffing-box packing based on a flexibility analysis ». Tribology International vol. 42 , nº 6. p. 980-986
- Mohammed Diany, Hakim Bouzid. 2009 « Short term relaxation modeling of valve stem packings ». Journal of Tribology vol. 131 , nº 3
- Nor Eddine Laghzale, Hakim Bouzid. 2009 « Analytical modeling of hydraulically expanded tube-to-tubesheet joints ». Journal of Pressure Vessel Technology vol. 131 , nº 1
- Nor Eddine Laghzale, Hakim Bouzid. 2009 « Theoretical analysis of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behavior ». Journal of Pressure Vessel Technology vol. 131 , nº 6
- Sylvie Nadeau, Hakim Bouzid, David Prud’homme. 2008 « Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ». Revue Internationale sur l’Ingénierie des Risques Industriels vol. 1 , nº 1. p. 46-64
- Akli Nechache, Abdel-Hakim Bouzid. 2008 « On the use of plate theory to evaluate the load relaxation in bolted flanged joints subjected to creep ». International Journal of Pressure Vessels and Piping vol. 85 , nº 7. p. 486-497
- Akli Nechache, Abdel-Hakim Bouzid. 2008 « The effect of cylinder and hub creep on the load relaxation in bolted flanged joints ». Journal of Pressure Vessel Technology vol. 130 , nº 3. p. 031211 (9 p.)
- Akli Nechache, Abdel-Hakim Bouzid. 2007 « Creep analysis of bolted flange joints ». International Journal of Pressure Vessels and Piping vol. 84 , nº 3. p. 185-194
- A. Bouzid, M. Diany, M. Derenne. 2006 « Determination of gasket effective width for the ASME proposed flange design rules ». Welding Research Council Bulletin , nº 515. p. 1-43
- O. Sakr, A. Bouzid, M. Derenne. 2006 « 3D-finite element modelling of bolted flanged joints subjected to external bending loads ». Welding Research Council Bulletin , nº 516. p. 1-56
- O. Sakr, A. Bouzid, M. Derenne. 2006 « Development of a transducer for measuring gasket contact stress in bolted flanged joints ». Welding Research Council Bulletin , nº 516. p. 57-85
- Hakim Bouzid, A. Nechache. 2005 « An analytical solution for evaluating gasket stress change in bolted flange connections subjected to high temperature loading ». Journal of Pressure Vessel Technology vol. 127 , nº 4. p. 414-421
- Hakim Bouzid, A. Nechache. 2005 « Thermally induced deflections in bolted flanged connections ». Journal of Pressure Vessel Technology vol. 127 , nº 4. p. 394-401
- Luc Marchand, Michel Derenne, Olivier Sakr, Hakim Bouzid. 2005 « Long term pressurized graphite gasketed joint tests ». Welding Research Council Bulletin , nº 507. p. 1-14
- Abdel-Hakim Bouzid, Henri Champliaud. 2004 « Contact stress evaluation of nonlinear gaskets using dual kriging interpolation ». Journal of Pressure Vessel Technology vol. 126 , nº 4. p. 445-450
- Hakim Bouzid, Michel Derenne. 2004 « Effect of gasket width and gasket diameter on tightness performance, gasket constants and emissions : an exploratory experimental investigation ». Welding Research Council Bulletin , nº 496. p. 24-38
- Hakim Bouzid, Michel Derenne, Yves Birembaut. 2004 « Effect of gasket width on tightness performance gasket constants and emissions ». Welding Research Council Bulletin , nº 484. p. 39-50
- Hakim Bouzid, Michel Derenne, Marwan El-Rich. 2004 « Effect of flange rotation and gasket width on leakage behavior of bolted flanged joints ». Welding Research Council Bulletin , nº 496. p. 1-23
- Hakim Bouzid, Michel Derenne, Luc Marchand. 2003 « Long duration mechanical performance of PTFE based gasket materials ». Welding Research Council Bulletin , nº 484. p. 12-22
- O. Sakar, A. Bouzid, M. Derenne, L. Marchand, U. Muzzo. 2003 « Gasketed joint emissions and leakage : WRC Bulletin 484 - August 2003 ». Welding Research Council, Progress Reports vol. 58 , nº 11-12
- Olivier Sakr, Hakim Bouzid, Michel Derenne, Luc Marchand. 2003 « Correlation between PPMV and mass leakage rate of gasketing products ». Welding Research Council Bulletin , nº 484. p. 1-11
- Yves Birembaut, Thierry Ledauphin, Vincent Masi, Hakim Bouzid, Michel Derenne, Pascal Martelli-Garon. 2002 « Part 1: The effects of bending moments on bolted gasketed joints ». Welding Research Council Bulletin , nº 473. p. 1-17
- Abdel-Hakim Bouzid, Michel Derenne. 2002 « Analytical modeling of the contact stress with nonlinear gaskets ». Journal of Pressure Vessel Technology vol. 124 , nº 1. p. 47-53
- Abdel-Hakim Bouzid, Akli Nechache, Warren Brown. 2002 « The effect of steady state thermal loading on the deflections of a flanged joint with a cover plate ». Welding Research Council, Progress Reports vol. 57 , nº 7-8. p. 99-108
- Abdel-Hakim Bouzid, Michel Derenne, L. Marchand, J. R. Payne. 2001 « Service temperature characterization of polytetrafluoroethylene-based gaskets ». Journal of Testing and Evaluation vol. 29 , nº 5. p. 442-452
- N. Mammeri, d. L. Piron, Hakim A. Bouzid, Michel Derenne, Luc Marchand, Yves Birembaut. 2000 « Corrosion quantification test for flanges with graphite-based gaskets ». Materials Performance vol. 39 , nº 4. p. 64-69
- A. Bouzid, A. Chaaban. 1997 « An accurate method of evaluating relaxation in bolted flanged connections ». Journal of Pressure Vessel Technology vol. 119 , nº 1. p. 10-17
- A. Bouzid, A. Chaaban, A. Bazergui. 1995 « Effect of gasket creep-relaxation on the leakage tightness of bolted flanged joints ». Journal of Pressure Vessel Technology vol. 117 , nº 1. p. 71-78
- A. Bouzid, A. Chaaban. 1993 « Flanged joint analysis: a simplified method based on elastic interaction ». Transactions of the Canadian Society for Mechanical Engineering vol. 17 , nº 2. p. 181-196
- H. Bouzid, J. P. Kenné, S. Nadeau, T. Gowings. 2015 « Chapter 2: Case study : Designing a log splitter ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 7-13. Cambridge Scholars Publishing
- H. Bouzid, S. Nadeau, J. P. Kenné. 2015 « Chapter 1: Case study : Gasket test rig ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 1-6. Cambridge Scholars Publishing
- H. Bouzid, S. Nadeau, J. P. Kenné, C. Giner-Morency. 2015 « Chapter 4: Case study : Designing a hydraulic car lift for small auto repair shops ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 26-36. Cambridge Scholars Publishing
- H. Bouzid, S. Nadeau, J. P. Kenné, T. Gowings, C. Giner-Morency. 2015 « Chapter 5: Case study : Designing a boom lift ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 37-55. Cambridge Scholars Publishing
- J. P. Kenné, H. Bouzid, S. Nadeau, C. Giner-Morency. 2015 « Chapter 14: Case study : Designing a lift truck ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 122-128. Cambridge Scholars Publishing
- J. P. Kenné, H. Bouzid, S. Nadeau, C. Giner-Morency. 2015 « Chapter 6: Case study : Designing an aerial work platform vehicle ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 54-63. Cambridge Scholars Publishing
- J. P. Kenné, S. Nadeau, H. Bouzid, C. Giner-Morency. 2015 « Chapter 12: Case study: automated overhead crane ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 105-113. Cambridge Scholars Publishing
- S. Nadeau, H. Bouzid, J. P. Kenné, C. Giner-Morency. 2015 « Chapter 13: Designing an airplane baggage belt loader ». In Sustainable Development in Mechanical Engineering: Case Studies in Applied Mechanics. p. 114-121. Cambridge Scholars Publishing
- Hakim Bouzid, Jean-Pierre Kenné, Sylvie Nadeau. 2010 « Case study : designing a log splitter ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 7-13. Cambridge Scholars Publishing
- Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Case study : designing a boom lift ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 36-53. Cambridge Scholars Publishing
- Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Case study : designing a hydraulic car lift for small auto repair shops ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 26-35. Cambridge Scholars Publishing
- Hakim Bouzid, Sylvie Nadeau, Jean-Pierre Kenné. 2010 « Case study : gasket test rig ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 1-6. Cambridge Scholars Publishing
- Jean-Pierre Kenné, Hakim Bouzid, Sylvie Nadeau. 2010 « Case study : designing a lift truck ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 132-138. Cambridge Scholars Publishing
- Jean-Pierre Kenné, Hakim Bouzid, Sylvie Nadeau. 2010 « Case study : designing an aerial work platform vehicle ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 54-60. Cambridge Scholars Publishing
- Jean-Pierre Kenné, Sylvie Nadeau, Hakim Bouzid. 2010 « Case study : automated overhead crane ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. Cambridge Scholars Publishing
- Sylvie Nadeau, Hakim Bouzid, Jean-Pierre Kenné. 2010 « Case study : designing an airplane baggage belt loader ». In Sustainable Development in Mechanical Engineering : Case Studies in Applied Mechanics. p. 125-131. Cambridge Scholars Publishing
- Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2023 « Investigation of the corrosion behavior of SA-105 material using a developed experimental bolted joint test fixture ». Communication lors de la conférence : Canadian Society for Mechanical Engineering International Congress and Computational Fluid Dynamics Canada International Congress (CSME - CFD-SC) (Sherbrooke, QC, Canada, May 28-31, 2023)
- Rashique Iftekhar Rousseau, Abdel-Hakim Bouzid, Mikel Abasolo. 2023 « The tightening and untightening of bolted joints ». Communication lors de la conférence : Canadian Society for Mechanical Engineering International Congress and Computational Fluid Dynamics Canada International Congress (CSME - CFD-SC) (Sherbrooke, QC, Canada, May 28-31, 2023)
- Zijian Zhao, Abdel-Hakim Bouzid. 2023 « A study on the contact quality improvement of fin to tube assemblies ». Communication lors de la conférence : Canadian Society for Mechanical Engineering International Congress and Computational Fluid Dynamics Canada International Congress (CSME - CFD-SC) (Sherbrooke, QC, Canada, May 28-31, 2023)
- Hakim A. Bouzid. 2022 « On the self-loosening of bolted joints ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022)
- Hakim A. Bouzid, Sofiane Bouzid, Anh Dung Ngo. 2022 « On the tightness and strength of ASME section X FRP Flanges ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022)
- Soorosh Hakimian, Hakim A. Bouzid, Lucas Hof. 2022 « A study on the influence of operational factors on the flange face corrosion using a novel experimental test bench ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022)
- Rashique Iftekhar Rousseau, Hakim A. Bouzid. 2022 « On the stiffness of bolts and clamped members ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022)
- S. Demers, Sylvie Nadeau, Abdel-Hakim Bouzid. 2011 « Une approche analytique pour la modélisation réaliste du mécanisme lésionnel de la hernie discale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 10 mars 2011)
- Mohammed Diany, Hakim Bouzid. 2010 « Caractérisation mécanique des garnitures de presse-étoupe ». Communication lors de la conférence : VI ième Journées d'Études Techniques 2010 (JET) (Marrakech, Maroc, 5-7 mai 2010)
- Nor Eddine Laghzale, Hakim Bouzid, A. El Gherrad. 2010 « Étude des effets de l'écrouissage et du fluage sur la pression résiduelle de contact dans les joints tubes-plaques tubulaires ». Communication lors de la conférence : VI ième Journées d'Études Techniques 2010 (JET) (Marrakech, Maroc, 5-7 mai 2010)
- Sébastien Demers, Hakim Bouzid, Sylvie Nadeau. 2009 « Étude du mécanisme lésionnel de la hernie discale : une approche analystique de modélisation de la hernie discale ». Communication lors de la conférence : Conférences Mensuelles en Sécurité du Travail et Contrôle des Risques Industriels (Montréal, QC, Canada, 10 déc. 2009)
- Mohammed Diany, Hakim Bouzid. 2009 « Modélisation numérique des garnitures de valves ». Communication lors de la conférence : Colloque International sur les Méthodes Mathématiques et Numériques en Mécaniques des Fluides - CIMMNMF (Errachidia, Maroc, 28-29 avril 2009)
- Walter Lee, Hakim Bouzid, James Huang. 2009 « Qualification of gasket performance for vacuum applications ». Communication lors de la conférence : VSP Technologies "Sealing Technology Exposition" (Prince George, VA, USA, Dec. 2, 2009)
- Hakim Bouzid, N. Laghzale. 2008 « An analytical solution of hydraulicaly expanded tube-to-tubesheet joints with linear strain hardening material behaviour ». Communication lors de la conférence : Third International Conference on Engineering Failure Analysis (ICEFA-III) (Barcelona, Spain, July 13-16, 2008)
- W. Lee, Hakim Bouzid, J. Huang. 2008 « Effect of HOBT test parameters on expanded PTFE gaskets ». Communication lors de la conférence : ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, July 27-31, 2008)
- Hakim Bouzid. 2005 « Bolted flanged joint flexibility analysis ». Communication lors de la conférence : PVRC Conference on Best Practices for Flange Assembly and Maintenance (PVRC-WRC) (New Orleans, LA, USA, May 23-25, 2005)
- O. Morin, Henri Champliaud, F. Duchaine, Hakim Bouzid. 2003 « Krigeage du comportement des joints d'étanchéité au chargement et au déchargement ». Communication lors de la conférence : 71e Congrès de l'ACFAS (Rimouski, QC, Canada, 19-23 mai 2003)
- A. Bouzid, J. R. Payne. 2000 « FEM Studies at TTRL and ÉTS ». Communication lors de la conférence : ASTM Committee F03 Gaskets Meeting : Technology Session (Orlando, FL, USA, Oct. 24-26, 2000)
- G .L. Hollinger, K. H. Hsu, J. R. Payne, M. Derenne, A. Bouzid, L. Marchand, R. Mueller, J. Waterland, R. Winter. 1999 « A look at today’s gasket evaluation technology ». Communication lors de la conférence : 1st International Conference on Sealing Technology and Plant Leakage Reduction (ICSTPLRL-99) (Charlotte, NC, USA, Nov., 1999)
- Samiha Zrinej, Laghzale Nor-Eddine, Hakim A. Bouzid. 2024 « Elastic stress analysis of shrink-fit thick-wall FGM cylinders ». 4th International Conference on Innovative Research in Applied Science, Engineering and Technology (IRASET) (Fez, Morocco, May 16-17, 2024) Institute of Electrical and Electronics Engineers Inc.
- Abdel-Hakim Bouzid, Sofiane Bouzid. 2023 « Integrity and leak tightness of ASME B.16.5 and B.16.47 flanges used in nuclear piping systems ». 30th International Conference on Nuclear Engineering (ICONE30) (Kyoto, Japan, May 21-26, 2023) American Society of Mechanical Engineers (ASME)
- Abdel-Hakim Bouzid, Sofiane Bouzid, Khaled Benfriha. 2023 « Effect of bolt-up stress level on the strength of ASME B16.5 and B16.47 standard flanges ». Proceedings of the ASME Pressure Vessels & Piping Conference (Atlanta, GA, USA, July 16-21, 2023) American Society of Mechanical Engineers (ASME)
- Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2023 « The effects of fluid working conditions on flange face corrosion ». Proceedings of the ASME Pressure Vessels & Piping Conference (Atlanta, GA, USA, July 16-21, 2023) American Society of Mechanical Engineers (ASME)
- Oussama Adjoul, Khaled Benfriha, Brahim Mahiddini, Abdel-Hakim Bouzid, Yacine Benabid. 2022 « New approach for the conjoint optimization of the design and manufacturing by integration of production costs ». Proceedings M2D2022 - 9th International Conference Mechanics and Materials in Design, Theory, Experiments and Applications in Engineering and Biomechanics (Funchal, Madeira, Portugal, June 26-30, 2022) INEGI-FEUP
- Sofiane Bouzid, Abdel-Hakim Bouzid, Anh Dung Ngô. 2022 « A study of the strength of ASME section X FRP flanges ». ASME Pressure Vessels & Piping Conference (Las Vegas, NV, USA, July 17-22, 2022) American Society of Mechanical Engineers (ASME)
- Sofiane Bouzid, Abdel-Hakim Bouzid, Anh Dung Ngô. 2022 « Stress analysis of ASME section X flanges using classical lamination theory ». 14th International Pipeline Conference (Calgary, AB, Canada, Sept. 26-30, 2022) American Society of Mechanical Engineers (ASME)
- Soroosh Hakimian, Lucas A. Hof, Hakim A. Bouzid. 2022 « An improved fixture to quantify corrosion in bolted flanged gasketed joints subjected to service conditions ». ASME Pressure Vessels & Piping Conference (Las Vegas, Nevada, USA, July 17-22, 2022) American Society of Mechanical Engineers (ASME)
- Linbo Zhu, Hu Pan, Yilong Yang, Abdel-Hakim Bouzid, Jun Hong. 2022 « Effect of the bending stiffness of bolted flange joints on the dynamics of aero-engine rotors ». ASME Pressure Vessels & Piping Conference (Las Vegas , NV, USA, July 17-22, 2022) American Society of Mechanical Engineers (ASME)
- Linbo Zhu, Yilong Yang, Hongwei Huang, Abdel-Hakim Bouzid, Jun Hong. 2022 « A novel method to predict the concentricity of aero-engine rotor considering the assembly process of bolted flange joints ». ASME Pressure Vessels & Piping Conference (Las Vegas , NV, USA, July 17-22, 2022) American Society of Mechanical Engineers (ASME)
- Abdel-Hakim Bouzid, Shubhra Kanti Das. 2021 « High temperature aged leakage relaxation screening tests on confined flexible graphite gaskets ». ASME 2021 Pressure Vessels & Piping Conference (En ligne, July 13-15, 2021) American Society of Mechanical Engineers (ASME)
- Mohammad Choulaei, Abdel-Hakim Bouzid. 2021 « Stress analysis of bolted flange joints with different shell connections ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (En ligne, Nov. 01-05, 2021) American Society of Mechanical Engineers (ASME)
- Rashique Iftekhar Rousseau, Abdel-Hakim Bouzid, Zijan Zhao. 2021 « Accurate evaluation of bolt and clamped members stiffnesses of bolted joints ». ASME 2021 Pressure Vessels & Piping Conference (En ligne, July 13-15, 2021) American Society of Mechanical Engineers (ASME)
- Zijan Zhao, Abdel-Hakim Bouzid. 2021 « Stress analysis of tubes during die expansion process ». ASME 2021 Pressure Vessels & Piping Conference (En ligne, July 13-15, 2021) American Society of Mechanical Engineers (ASME)
- Khaled Benfriha, Abdel-Hakim Bouzid, Peter Wardle, Michael Deligant, Yacine Benabid, Oussama Adjoul. 2020 « The influence of common business models on design processes life cycle and maintenance costs of products and systems ». Proceedings IRF2020: 7th International Conference Integrity-Reliability-Failure (Funchal, Portugal, Sept. 06-10, 2020) INEGI-FEUP
- A. Bouzid. 2020 « Liquid leak rate predictions in packed stuffing boxes ». BHR Group – 25th International Conference on Fluid Sealing (Manchester, UK, March 4-5, 2020)
- Abdel-Hakim Bouzid. 2020 « Liquid leak rate predictions in packed stuffing boxes ». 25th International Conference on Fluid Sealing (Manchester, UK, Mar. 04-05, 2020) BHR Group Limited
- Dinu Thomas Thekkuden, Abdel-Hamid I. Mourad, Abdel-Hakim Bouzid. 2020 « Impact of grooves in hydraulically expanded tube-to-tubesheet joints ». ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 03, 2020) American Society of Mechanical Engineers (ASME)
- Dinu Thomas Thekkuden, Abdel-Hamid I. Mourad, Abdel-Hakim Bouzid, Tariq Darabseh. 2020 « Impact of expansion pressure on wall thinning and contact pressure for hydraulically expanded tube-to-tubesheet joints: Numerical analysis ». Advances in Science and Engineering Technology International Conferences (ASET) : Advanced Materials, Design and Manufacturing (Dubai, United Arab Emirates, Feb. 04-06, 2020) IEEE
- Ali Khazraiyan Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngo. 2020 « An analytical anisotropic model to analyze fiber reinforced polymer bolted flange joints ». ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 03, 2020) American Society of Mechanical Engineers (ASME)
- Zijian Zhao, Abdel-Hakim Bouzid. 2020 « Stress analysis of SS316l tube die expansion for high pressure gas coolers ». ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 03, 2020) American Society of Mechanical Engineers (ASME)
- Linbo Zhu, Jun Hong, Zhenming Shi, Abdel-Hakim Bouzid. 2020 « Numerical simulation of the assembly process of bolted flange joints used in rotating machinery ». ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 3, 2020) American Society of Mechanical Engineers (ASME)
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid. 2019 « Prediction of liquid and gas leak rates in packed stuffing boxes ». ASME 2019 Pressure Vessels and Piping Conference, PVP 2019 (San Antonio, TX, USA, July 14-19, 2019) American Society of Mechanical Engineers (ASME)
- Abdel-Hakim Bouzid, Hacène Touahri. 2019 « Analytical and numerical modelling of sheet plate cold expanded hole subjected to reverse yielding ». ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE) (Salt Lake City, UT, USA, Nov. 11-14, 2019) American Society of Mechanical Engineers (ASME)
- Mohamed Esouilem, Abdel-Hakim Bouzid, Sylvie Nadeau. 2019 « Accident causes involving pressure vessels: A case study analysis with STAMP model ». Frühjahrskongress der Gesellschaft für Arbeitswissenschaft (Dresden, Germany, Feb. 27-Mar. 1, 2019) GfA-Press
- Mohamed Esouilem, Abdel-Hakim Bouzid, Sylvie Nadeau. 2019 « Safety and risk management analysis of accidents related to pressure vessels and piping in Alberta petrochemical industry from 2008 to 2017 ». Pressure Vessels and Piping Conference (PVP) 2019 (San Antonio, TX, USA, July 14-19, 2019) ASME
- Xavier Legault, Abdel-Hakim Bouzid, Ali Salah Omar Aweimer. 2019 « Mechanical characterization of valve compression packing at high temperature ». ASME 2019 International Mechanical Engineering Congress and Exposition (IMECE) (Salt Lake City, UT, USA, Nov. 11-14, 2019) American Society of Mechanical Engineers (ASME)
- Amal Mouâa, Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2019 « Elastic-plastic stresses in shrink fit with a solid shaft ». 14th Congress of Mechanics (CMM2019) (Rabat, Morocco, April 16-19, 2019) EDP Sciences
- Limbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2019 « A novel methodology to optimize the tightening sequence in bolted flange joints ». ASME 2019 Pressure Vessels and Piping Conference, PVP 2019 (San Antonio, TX, USA, July 14-19, 2019) American Society of Mechanical Engineers (ASME)
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid. 2018 « Experimental investigation of interfacial and permeation leak rates in sheet gaskets and valve stem packing ». ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Zijian Zhao. 2018 « Prediction of leak rates through porous materials using analytical and numerical approaches ». ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018) ASME
- Abdel-Hakim Bouzid, Mohammad Pourreza. 2018 « Analytical evaluation of residual stresses in the transition zone of expanded tube-to-tubesheet joints ». ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME
- I. Coria, I. Martin, A. H. Bouzid, I. Heras, M. Abasolo. 2018 « FEM superelement technique applied to oil and gas bolted flange connections ». 24th International Conference on Fluid Sealing, March 7, 2018 - March 8, 2018 (Manchester, United kingdom, March 7-8, 2018) BHR Group Limited
- Ibai Coria, Iñigo Martín, Hakim Bouzid, Iker Heras, Josu Aguirrebeitia. 2018 « Optimized bolt tightening sequences in bolted joints using superelement FE modeling technique ». 37th International Conference on Ocean, Offshore and Arctic Engineering (Madrid, Spain, June 17-22, 2018) ASME
- Valentin Fort, Abdel-Hakim Bouzid, Michel Gratton. 2018 « Analytical modeling of self-loosening of bolted joints ». ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME
- Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2018 « Influence of thermal ratcheting on the creep and mechanical properties of High Density Polyethylene (HDPE) ». ASME 2018 International Mechanical Engineering Congress and Exposition (Pittsburgh, PA, USA, Nov. 9-15, 2018) ASME
- Linbo Zhu, Yifei Hou, Abdel-Hakim Bouzid, Jun Hong. 2018 « On the design of contact member surface shape of bolted joints to minimize clamping load loss ». ASME 2018 Pressure Vessels and Piping Conference (PVP 2018) (Prague, Czech Republic, July 15-20, 2018) ASME
- Ali Salah Omar Aweimer, Abdel-Hakim Bouzid, Mehdi Kazeminia. 2017 « Leak rates of gasses through packing seals with different analytical approaches ». ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017) American Society of Mechanical Engineers (ASME)
- Abdel-Hakim Bouzid, Ali Salah Omar Aweimer. 2017 « On the use of gas flow models to predict leak rates through sheet gasket materials ». ASME 2017 International Mechanical Engineering Congress and Exposition (Tampa Bay, Fl, USA, Nov. 03-09, 2017) ASME
- Palaniappan Rahul Kanthabhabha Jeya, Zijan Zhao, Abdel-Hakim Bouzid. 2017 « HDPE and PVC creep and thermal ratcheting behavior under compression ». 21st International Conference on Composite Materials (Xi'an, China, Aug. 20-25, 2017) ICCM21
- Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017 « Characterisation of polytetrafluoroethylene and fiber based gaskets under creep and thermal ratcheting ». ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017) American Society of Mechanical Engineers (ASME)
- Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017 « Creep and thermal ratcheting characterization of polytetrafluoroethylene-based gasket materials ». World Congress on Advances in Structural Engineering an Mechanics (ASEM 17), The 2017 International Conference onSteel and Composite Structures (ICSCS17) (Ilsan (Seoul), Korea, Aug. 28 - Sept. 01, 2017) IASEM Conferences
- Ali K. Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngô. 2017 « Effect of material anisotropy on the structural integrity of composite bolted flanged joints ». ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017) American Society of Mechanical Engineers (ASME)
- Pauline Wyckaert, Sylvie Nadeau, Hakim Bouzid. 2017 « Analysis of risks of pressure vessels ». Gesellschaft für Arbeitswissenschaft : Soziotechnische Gestaltung des digitalen Wandels – kreativ, innovativ, sinnhaft (Zurich, Suisse, Fev. 15-17, 2017) GFA Press
- Zijian Zhao, Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim Bouzid. 2017 « Creep modeling of polyvinyl chloride bolted flange joints ». ASME 2017 International Mechanical Engineering Congress and Exposition (IMECE 2017) (Tampa, FL, USA, Nov. 03-09, 2017) American Society of Mechanical Engineers
- Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2017 « Analytical modelling of elastic interaction in bolted flange gasketed joints ». ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017) American Society of Mechanical Engineers (ASME)
- Hocine Attoui, Abdel-Hakim Bouzid. 2016 « On the equivalent mechanical properties of spiral wound gaskets ». ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME)
- Abdel-Hakim Bouzid, Linbo Zhu. 2016 « Effect of adjacent tube expansion on the residual contact pressure of tube-to-tubesheet joints ». ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME)
- M. Kazeminia, A. H. Bouzid. 2016 « Predicting leakage in packed stuffing boxes ». 23rd International Conference on Fluid Sealing 2016 (Manchester, UK, Mar. 2-3, 2016) BHR Group
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2016 « Characterization and modeling of time-dependent behaviour of braided packing rings ». ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME)
- Linbo Zhu, Abdel-Hakim Bouzid, Jun Hong. 2016 « Numerical and experimental study of elastic interaction in bolted flange joints ». ASME 2016 Pressure Vessels and Piping Conference (PVP) (Vancouver, BC, Canada, July 17-21, 2016) American Society of Mechanical Engineers (ASME)
- Abdel-Hakim Bouzid. 2015 « Safety and reliability assessment of a miniature steam generator ». Proceedings 19th Triennial Congress of the International Ergonomics Association (Melbourne, Australia, Aug. 9-14, 2015) International Ergonomics Association
- Abdel-Hakim Bouzid, Mehdi Kazeminia. 2015 « Effect of reverse yielding on the residual contact stresses of tube-to-tubesheet joints subjected to hydraulic expansion ». ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19-23, 2015) American Society of Mechanical Engineers
- Aly El Domiaty, Abdel-Hamid Mourad, Abdel-Hakim Bouzid. 2015 « A proposed generalized model for forming limit diagram ». ASME 2015 Pressure Vessels and Piping Conference (Boston, MA, USA, July 19–23, 2015) American Society of Mechanical Engineers (ASME)
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2015 « On the modeling of gas flow through porous compression packings used in valve stuffing-boxes ». ICONE 2015 - 23rd International Conference on Nuclear Engineering: Nuclear Power - Reliable Global Energy (Makuhari, Chiba, Japan, May 17-21, 2015) American Society of Mechanical Engineers (ASME)
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2015 « Prediction of leak rates in porous braided packing rings ». ASME 2015 Pressure Vessels and Piping Conference. (Boston, MA, USA, July 19-23, 2015) American Society of Mechanical Engineers
- N. Laghzale, A. Bouzid, A. Elgharad. 2015 « L’effet de l’interférence sur un assemblage fretté dans le domaine plastique ». 22ème Congrès Français de Mécanique (Lyon, France, 24-28 août 2015) Association Française de Mécanique
- Hocine Attoui, Hakim Bouzid, Jerry A. Waterland. 2014 « Buckling and lateral pressures in spiral wound gaskets ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Anaheim, CA, USA, July 20-24, 2014) American Society of Mechanical Engineers (ASME)
- M. Daoud, W. Jomaa, Jean-François Chatelain, Abdel-Hakim Bouzid, Victor Songmene. 2014 « Identification of material constitutive law constants using machining tests: A response surface methodology based approach ». 2014 International Conference on High Performance and Optimum Design of Structures and Materials, HPSM 2014 which incorporated the Seminar on Optimum Design in Engineering, OPTI 2014 (Ostend, Belgium, June 9-11, 2014) WITPress
- Monzer Daoud, Jean-François Chatelain, Hakim Bouzid. 2014 « On the effect of Johnson Cook material constants to simulate Al2024-T3 machining using finite element modeling ». ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE) (Montreal, QC, Canada, Nov. 14-20, 2014) American Society of Mechanical Engineers (ASME)
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2014 « Analysis of stresses and strains in packed stuffing-boxes ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Anaheim, CA, USA, July 20-24, 2014) American Society of Mechanical Engineers (ASME)
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2014 « Analytical and numerical evaluation of the axial stress distribution of two soft-packed stuffing-box configurations ». ASME Turbo Expo 2014: Turbine Technical Conference and Exposition (Düsseldorf, Germany, June 16-20, 2014) ASME
- Mehdi Kazeminia, Abdel-Hakim Bouzid. 2014 « Effect of tapered housing on the axial stress distribution in a stuffing box pack ». International Conference on Advances in Mechanical and Automation Engineering-MAE 2014 (Rome, Italy, June 7-8, 2014) Institute of Research Engineers and Doctors
- Abdel-Hakim Bouzid. 2013 « Failure investigation of an aluminum extension portable ladder ». Chancen durch Arbeits-, Produkt- und Systemgestaltung - Zukunftsfähigkeit für Produktions- und Dienstleistungsunternehmen : 27.02. bis 01.03.2013, Krefeld (Krefeld, Germany, Feb. 27-Mar. 1, 2013) GfA-Press
- Abdel-Hakim Bouzid, Samir Benabdallah. 2013 « On the hot blow-out characterization of PTFE-based gasket materials ». American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP (Paris, France, July 14-18, 2013) American Society of Mechanical Engineers
- S. Demers, Sylvie Nadeau, Hakim Bouzid. 2013 « On the use of multishell theory to model herniated discs ». Dokumentation des 59. Arbeitswissenschaftlichen Kongresses Krefeld 27.02.-01.03.2013 (Krefeld, Germany, Feb. 27-Mar. 1, 2013) GfA-Press
- Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2013 « Développement d'un modèle analytique pour l'étude des contraintes d'un disque intervertebral soumis à une compression axiale ». CIRI 2013, 3ème Congrès international sur l'ingénierie des risques industriels (Reims, France, 3-5 juil. 2013) Université de Reims Champagne-Ardenne
- Sébastien Demers, Sylvie Nadeau, Hakim Bouzid. 2013 « Analytical anisotropic multi-shell model of a simplified intervertebral disc subjected to axial compression ». ASME 2013 Summer Bioengineering Conference (SBC) (Sunriver, OR, USA, June 26-29, 2013) American Society of Mechanical Engineers
- Do Tan Dan, Abdel-Hakim Bouzid, Thien-My Dao. 2012 « On the development of a new bolt spacing formula ». ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012) American Society of Mechanical Engineers
- S. Demers, Hakim Bouzid, Sylvie Nadeau. 2012 « Stress analysis of the intervertebral disc using a developed multi-shell model ». Twelfth Pan American Congress of Applied Mechanics (PACAM XII) (Trinidad, Spain, Jan. 2-6, 2012)
- Sébastien Demers, Abdel-Hakim Bouzid, Sylvie Nadeau. 2012 « Analytical and finite element multi-shell modelling of an intervertebral disc ». ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012) American Society of Mechanical Engineers
- Lotfi Grine, Abdel-Hakim Bouzid. 2012 « Prediction of leak rates through porous gaskets at high temperature ». ASME 2012 Pressure Vessels and Piping Conference, PVP 2012 (Toronto, ON, Canada, July 15-19, 2012) American Society of Mechanical Engineers
- Mohammed Diany, Abdel-Hakim Bouzid. 2011 « Creep constitutive law of packing materials based on relaxation tests ». ASME Pressure Vessels and Piping Conference (PVP) (Baltimore, Maryland, USA, July 17-21, 2011) ASME
- N. Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2011 « Characteristics of a bolted joint with a shape memory alloy stud ». 5th International Conference on Computational Methods and Experiments in Materials Characterisation (MC) (Malta, July 13-15, 2011) WITPress
- Nazim Ould-Brahim, Abdel-Hakim Bouzid, Vladimir Brailovski. 2011 « Load recovery of a bolted joint with a shape memory alloy stud ». ASME Pressure Vessels and Piping Conference (PVP) (Baltimore, Maryland, USA, July 17-21, 2011) ASME
- Sébastien Demers, Hakim A. Bouzid, Sylvie Nadeau. 2010 « La hernie discale: mieux la comprendre pour mieux la prévenir ». Congrès AQHSST 2010 (Lévis, QC, Canada, 12-14 mai 2010) Association québécoise pour l'hygiène, la santé et la sécurité du travail
- Mohammed Diany, Abdel-Hakim Bouzid. 2010 « An experimental-numerical procedure for stuffing box packing characterization ». ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010) ASME
- Tan Dan Do, Hakim Bouzid, Thien-My Dao. 2010 « On the use of the theory of rings on non-linear elastic foundation to study the effect of bolt spacing in bolted flange joints ». ASME Pressure Vessel & Piping Conference (PVP) (Bellevue, Washington, July 18-22, 2010) American Society of Mechanical Engineers
- Lotfi Grine, Abdel-Hakim Bouzid. 2010 « Liquid leak predictions in micro and nano-porous gaskets ». ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010) ASME
- Walter Lee, Abdel-Hakim Bouzid, James Huang. 2010 « Qualification of gasket performance for vacuum applications ». ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010) ASME
- Natalia Petrova, Abdel-Hakim Bouzid. 2010 « Flanged joints of multi-pass shell-and-tube heat exchangers subjected to non-axisymmetric thermal loading ». ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference (Bellevue, WA, USA, July 18-22, 2010) American Society of Mechanical Engineers
- Hichem Galai, Hakim Bouzid. 2009 « Analytical modeling of flat face flanges with metal-to-metal contact beyond the bolt circle ». 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009) American Society of Mechanical Engineers
- Lotfi Grine, Hakim Bouzid. 2009 « Correlation of gaseous mass leak rates through micro and nano-porous gaskets ». 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009) American Society of Mechanical Engineers
- Walter Lee, Hakim Bouzid, James Huang. 2009 « Factors affecting high temperature relaxation behaviors of expanded PTFE gaskets ». 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26- 30, 2009) American Society of Mechanical Engineers
- A. Fitzgerald Waterland III, Hakim Bouzid. 2009 « Analysis of the compression behavior of spiral wound gaskets ». 2009 ASME Pressure Vessels and Piping Conference (PVP) (Prague, Czech republic, July 26-30, 2009) American Society of Mechanical Engineers
- Hakim Bouzid, Akli Nechache. 2008 « On the use of Belleville washers to reduce relaxation in bolted flange joints ». ASME Pressure Vessels and Piping Conference (PVP) (Chicago, IL, USA, Jul. 27-31, 2008) American Society of Mechanical Engineers
- Nor Eddine Laghzale, Abdel-Hakim Bouzid. 2008 « An analytical solution of hydraulically expanded tube-to-tubesheet joints with linear strain hardening material behaviour ». Proceedings of the ASME Pressure Vessels and Piping Conference (Chicago, IL, USA, July 27-31, 2008) American Society of Mechanical Engineers
- D. Tan Dan, Hakim Bouzid, Thien-My Dao. 2008 « Effect of bolt spacing on the circumferential distribution of gasket contact stress in bolted flange joints ». 16th International Conference on Nuclear Engineering (ICONE) (Orlando, FL, USA, May 11-15, 2008) American Society of Mechanical Engineers
- Abdel-Hakim Bouzid, Yves Birembaut, Hubert Lejeune. 2007 « On the effect of external bending loads in bolted flange joints ». ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007) American Society of Mechanical Engineers
- Mohammed Diany, Hakim Bouzid. 2007 « Short term relaxation of stuffing box packings ». ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007) American Society of Mechanical Engineers
- Nor Eddine Laghzale, Hakim Bouzid. 2007 « Analytical modeling of hydraulically expanded tube-to-tubesheet joints ». ASME Pressure Vessels and Piping Conference (PVP) (San Antonio, TX, USA, Jul. 22-26, 2007) American Society of Mechanical Engineers
- Sylvie Nadeau, Hakim Bouzid, D. Prud'Homme. 2007 « Étude du mécanisme lésionnel de la hernie discale : modélisation du comportement élastique non linéaire ». Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montréal, QC, Canada, 17-19 déc. 2007) École de technologie supérieure
- Sylvie Nadeau, Stéphane Hallé, S. Déry, P. Doucet, R. Gilbert, L. Gratton, Anh Dung Ngô, Jean Arteau, Hakim Bouzid, J. Brousseau, J. Dessureault, F. Gauthier, Frédéric Laville, P. Le-Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas. 2007 « Vers l'intégration de connaissances en santé et sécurité du travail en formation universitaire (génie mécanique) - une collaboration unique ». 24e Congrès de l’Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007) Association Internationale de Pédagogie Universitaire (AIPU)
- Mohammed Diany, Hakim Bouzid. 2006 « Evaluation of contact stress in stuffing box packings ». ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, Jul. 23-27, 2006) American Society of Mechanical Engineers
- Hakim Bouzid. 2005 « Bolted flange joints with full face gaskets : an analytical approach based on flexibility ». ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005) American Society of Mechanical Engineers
- Henri Champliaud, Abdel-Hakim Bouzid. 2005 « Computation of unloading stiffness of nonlinear gaskets using dual kriging interpolation ». Materials for safety and health : mesoscopic and multiscale consideration in modern science and engineering (Montreal, Canada, Aug. 1-4, 2005) École de technologie supérieure
- M. Diany, Hakim Bouzid, M. Derenne. 2005 « On the validity and limits of the gasket effective width concept ». ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005) American Society of Mechanical Engineers
- A. Nechache, Hakim Bouzid. 2005 « Creep effect of attached structures on bolted flanged joint relaxation ». ASME Pressure Vessels and Piping Conference (PVP) (Denver, CO, USA, Jul. 17-21, 2005) American Society of Mechanical Engineers
- Hakim A. Bouzid, Mohammed Diany, Michel Derenne. 2004 « Determination of gasket effective width based on leakage ». ASME/JSME Pressure Vessels and Piping Conference (PVP) (San Diego, CA, USA, Jul. 25-29, 2004) American Society of Mechanical Engineers
- Hakim A. Bouzid, Akli Nechache. 2004 « Creep modeling in bolted flange joints ». 2004 ASME/JSME Pressure Vessels and Piping Conference (PVP) (San Diego, CA, USA, Jul. 25-29, 2004) American Society of Mechanical Engineers
- Hichem Galai, Hakim Bouzid. 2004 « Analytical modeling of bolted flange joints with full face gaskets ». International Pipeline Conference (Calgary, AB, Canada, Oct. 4-8, 2004) American Society of Mechanical Engineers
- Akli Nechache, Hakim A. Bouzid, Van Ngan Le. 2004 « Analytical modeling of a bolted flange joint subjected to creep relaxation ». 12th International Conference on Nuclear Engineering (ICONE) (Arlington, VA, USA, Apr. 25-29, 2004) American Society of Mechanical Engineers
- D. Prud'homme, Sylvie Nadeau, Hakim Bouzid. 2004 « Étude de mécanisme lésionnel de la hernie discale : modélisation du comportement viscoélastique ». 72e Congrès de l'ACFAS (Montréal, QC, Canada, 10-12 mai 2004)
- Hakim A. Bouzid, Hichem Beghoul. 2003 « The design of flanges based on flexibility and tightness ». ASME Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003) American Society of Mechanical Engineers
- Hakim A. Bouzid, Henri Champliaud. 2003 « On the use of dual kriging interpolation for the evaluation of the gasket stress distribution in bolted joints ». Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003) American Society of Mechanical Engineers
- Hakim Bouzid, Hichem Beghoul. 2003 « A new proposed method for the design of bolted joints based on flexibility and tightness ». 10th International Conference on Pressure Vessel Technology (ICPVT-10) (Vienna, Austria, July 7-10, 2003) Österreichische Gesellschaft für Schweißtechnik
- Hakim Bouzid, Van Ngan Lê. 2003 « Développement de deux séances de laboratoire pour les cours MEC728 et SYS865 ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002)
- S. Nadeau, H. A. Bouzid, J. P. Kenné. 2003 « Conception d'un convoyeur à bagages pour le chargement/déchargement des avions ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2002-2003 : Actes (Montréal, QC, Canada, 25 avril 2003) École de technologie supérieure
- Sylvie Nadeau, Hakim Bouzid, Jean-Pierre Kenné. 2003 « L'enseignement par la méthode des cas en génie mécanique ». Journée d'Échanges sur les Réalisations Pédagogiques : PSIRE - Enseignement 2001-2002 : Actes (Montréal, QC, Canada, 11 juin 2002) École de technologie supérieure
- Akli Nechache, Hakim A. Bouzid. 2003 « The determination of load changes in bolted gasketed joints subjected to elevated temperature ». ASME Pressure Vessels and Piping Conference (PVP) (Cleveland, OH, USA, Jul. 20-24, 2003) American Society of Mechanical Engineers
- Hakim A. Bouzid, Akli Nechache, Warren Brown. 2002 « The effect of steady state thermal loading on the deflections of a flanged joint with a cover plate ». ASME Pressure Vessels and Piping Conference (PVP) (Vancouver, Canada, Aug. 5-9, 2002) American Society of Mechanical Engineers
- Warren Brown, Michel Derenne, Abdel-Hakim Bouzid. 2002 « Determination of gasket stress levels during thermal transients ». 2002 ASME Prssure Vessels and Piping Conference : Analysis of Bolted Joints (Vancouver, BC, Canada, Aug. 5-9, 2002) American Society of Mechanical Engineers
- Akli Nechache, Hakim A. Bouzid. 2002 « The redistribution of load in bolted gasketed joints subjected to steady state thermal loading ». 10th International Conference on Nuclear Engineering (ICONE) (Arlington, VA, USA, Apr. 14-18, 2002) American Society of Mechanical Engineers
- W. Brown, M. Derenne, A. Bouzid. 2001 « The effect of thermal loading of pressure vessel joints ». Journées d'Etudes Européennes sur les Equipements sous Pression: Paris, 23, 24, 25 octobre 2001, Hôtel Sofitel, Forum Rive Gauche = European Symposium on Pressure Equipment - ESOPE 2001 (Paris, France, Oct. 23-25, 2001) Association Française des Ingénieurs en Appareils à Pression
- Warren Brown, Michel Derenne, Hakim A. Bouzid. 2001 « Determination of gasket stress levels during high temperature flange operation ». ASME Pressure Vessels and Piping Conference (PVP) (Atlanta, GA, USA, Jul. 22-26, 2001) American Society of Mechanical Engineers
- Warren Brown, Michel Derenne, Hakim A. Bouzid. 2001 « Determination of the mechanical and thermal properties of selected gasket types ». ASME Pressure Vessels and Piping Conference (PVP) (Atlanta, GA, USA, Jul. 22-26, 2001) American Society of Mechanical Engineers
- Abdel-Hakim Bouzid, M. Derenne, L. Marchand, J. R. Payne. 2000 « Preventing PTFE Gasket Blow-Out ». Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia, )
- W. Brown, Michel Derenne, Abdel-Hakim Bouzid. 2000 « Determination of the Steady State Operating Temperature of Pressure Vessel Flange Components: Part 2 - Simplified Methods ». Proceedings of the 2000 ASME/PVP Conference (Seattle, WA, USA, )
- Warren Brown, Michel Derenne, Abdel-Hakim Bouzid. 2000 « Determination of the steady state operating temperature of pressure vessel flange components: part 1 - analytic methods ». Proceedings of the 2000 ASME/PVP Conference (Seattle, WA, USA, July 23-27, 2000) American Society of Mechanical Engineers
- M. Derenne, L. Marchand, Abdel-Hakim Bouzid, J. R. Payne. 2000 « Long Term Elevated Temperature Performance of Reinforced Flexible Graphite Sheet Gaskets ». Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia, )
- O. Sakr, Abdel-Hakim Bouzid, M. Derenne, L. Marchand, J. R. Payne. 2000 « Correlation Between PPMV and Mass Leakage Rate of Gasketing Products ». Proceedings of the Ninth International Conference on Pressure Vessel Technology ICPVT-9 (Sydney, Australia, )
- A. H. Bouzid, M. Derenne. 1999 « Simple method for analyzing the contact stress in bolted flange joints with non-linear gaskets ». Proceedings of the 1999 ASME/PVP Conference (Boston, MA, USA, Aug. 01-05, 1999) American Society of Mechanical Engineers
- M. El-Rich, A. Bouzid, M. Derenne. 1999 « On the effective gasket width and the contact stress in bolted gasketed joints ». Proceedings of the 1st International Conference on Sealing Technology and Plant Leakage Reduction (ICSTPLR99) (Charlotte, NC, USA, Nov. 15-19, 1999)
- N. Mameri, A. Bouzid, M. Derenne, L. Marchand, D. L. Piron. 1999 « Quantification of corrosion in bolted gasketed joints ». Proceedings of the 1st International Conference on Sealing Technology and Plant Leakage Reduction (ICSTPLR99) (Charlotte, NC, USA, Nov. 15-19, 1999)
- N. Mameri, D. L. Piron, M. Derenne, L. Marchand, A. Bouzid, Y. Birembaut. 1999 « Influence des joints d’étanchéité sur la corrosion des aciers: Développement d’un nouvel appareillage ». Proceedings of the International Symposium of the 38th Annual Conference of Metallurgists of CIM (Quebec City, QC, Canada, Aug. 22-26, 1999) Canadian Institute of Mining, Metallurgy and Petroleum
- A. H. Bouzid, M. Derenne, A. Chaarani. 1998 « Tightness prediction of bolted flanged connections subjected to external bending moments ». Proceedings of the 1998 ASME/JSME PVP Conference (San Diego, CA, USA, July 26-30, 1998) American Society of Mechanical Engineers
- M. Derenne, L. Marchand, A. Bouzid, J. R. Payne. 1998 « Proposed modifications to Draft No. 9 of the standard test method for gasket constants for bolted joint design ». Proceeding of the 1998 FSA symposium (Nashville, TN, USA, April, 1998)
- V. Masi, A. H. Bouzid, M. Derenne. 1998 « Correlation between gases and mass leak rate of gasketing materials ». Proceedings of the 1998 ASME/JSME PVP Conference (San Diego, CA, USA, July 26-30, 1998) American Society of Mechanical Engineers
- A. Bouzid, M. Derenne. 1997 « Distribution of the gasket contact stress in bolted flanged connections ». Proceedings of the 1997 ASME/PVP Conference (Orlando, FL, USA, July 27-31, 1997) American Society of Mechanical Engineers
- A. Bouzid, A. Chaaban. 1996 « Proposed method for evaluating relaxation in bolted flanged connections ». Proceedings of the International Conference on Pressure Vessel Technology (ICPVT-8) (Montreal, Qc, Canada, July 21-26, 1996) ASME
- A. Chaaban, A. Bouzid, M. Derenne, W. Schaefer. 1996 « On the use of a simple test fixture as a reliable representation of typical ANSI B16.5 flanged joint relaxation behaviour ». 4ème Colloque international sur l'étanchéité des assemblages statiques avec joints = 4th International symposium on fluid sealing of static gasketed joints (Mandelieu - La Napoule, France, Sept. 17-19, 1996) Centre Technique des Industries Mécaniques
- A. Bouzid, A. Chaaban, A. Bazergui. 1994 « Effect of gasket creep relaxation on the leakage tightness of bolted flanged joints ». Proceedings of the 1994 Pressure Vessels and Piping Conference (Minneapolis, MN, USA, June 19-23, 1994) American Society of Mechanical Engineers
- A. Bouzid, A. Chaaban, A. Bazergui. 1994 « The influence of the flange rotation on the leakage performance of bolted flanged joints ». CSME Forum, 1994 = Forum 1994 de la SCGM : proceedings/Comptes rendus (Montréal, QC, Canada, June 27-29, 1994) Canadian Society for Mechanical Engineering
- A. Chaaban, A. Bouzid, M. Derenne, W. Schaefer. 1993 « Evaluation of torque coefficients and gasket stress distributions in a bolted flanged joint using different types of lubricants ». 3ème colloque international sur l'étanchéité des assemblages statiques avec joints = 3rd International Symposium on Fluid Sealing of Static Gasketed Joints (Biarritz, France, Sept. 15-17, 1993) Centre Technique des Industries Mécaniques
- A. Bouzid, A. Chaaban. 1992 « Flanged joints analysis: a simplified method based on elastic interaction ». Proceedings of the 11th Symposium on Engineering Applications of Mechanics (Regina, SK, Canada, May 11-13, 1992) University of Regina
- José Veiga, Abdel-Hakim Bouzid. 2013 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Reza Adibi-Asl, Abdel-Hakim Bouzid. 2012 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Jerry Waterland, Abdel-Hakim Bouzid, Y. Shoji, J. F. Jr. Cory. 2011 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Abdel-Hakim Bouzid, John Martin. 2010 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Hakim Bouzid, J. Martin. 2009 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Abdel-Hakim Bouzid. 2008 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Abdel-Hakim Bouzid, John Martin. 2007 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- A. Bouzid, H. Kockelmann, T. Sawa. 2006 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- A. Bouzid, G. D. Morandin. 2005 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume 2 Computer applications/technology and bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Abdel-Hakim Bouzid. 2004 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume Analysis of bolted joints ». New York, NY, USA : American Society of Mechanical Engineers.
- Hakim A. Bouzid, Toshiyuki Sawa. 2003 « Proceedings of the ASME Pressure Vessels and Piping Conference : Volume Analysis of bolted joints ». New-York, NY, USA : American Society of Mechanical Engineers. 149 p.
- A. Bouzid. 2011 « ASTM F03 Research project on thermal expansion coefficient of PTFE gasketing materials under high loads ». ASTM International. 39 p.
- Hakim A. Bouzid. 2011 « Étude de l'effrondrement d'une échelle à coulisse causant la mort d'un travailleur de l'Église Sacré-Coeur-de-Jésus ». CSST. 43 p.
- Hakim Bouzid, Anh Dung Ngo. 2011 « Mesures du coefficient de frottement du plancher en Terrazzo de l'Église Sacré-Coeur-de-Jésus ». CSST. 10 p.
- Caroline Duchaine, Marc Veillette, Yvon Cormier, Jacques Lavoie, France Desjardins, Hakim Bouzid. 2003 « Analyse microbiologique des fluides de coupe de métaux : étude exploratoire ». Montréal, Canada : IRSST. 33 p.