September 01, 2021
Qingsong Wang
Professeur
Department
Département de génie électrique
Degrees
B.Sc. (Jilin University, Chine), M.Sc. (Tongji University, Chine), Ph.D. (Hong Kong Polytechnic University, Chine)
Office
A-2467
Email
Overview
Wang, Qingsong
Supervision
- En codirection avec :
Étude de l'efficacité des engrenages magnétiques, par Khodja,Omar
Hiver 2023 - En codirection avec :
Conception d'un nouvel engrenage magnétique, par Zioueche,Boudjemaa Walid
Hiver 2023 - En codirection avec : Chandra, Ambrish
La commande non linéaire d’une génératrice asynchrone en fonctionnement autonome, par Abdennouri,Ilyès
Automne 2022 - En codirection avec :
Conception d’un nouvel engrenage magnétique à densité de couple élevé avec des aimants permanents en structure excentrique et réseaux Halbach, par Nafa,Mahdi
Été 2023 - En codirection avec :
Optimisation de la conception d'une nouvelle machine à engrenage magnétique axial, par Karassane,Ibrahim
Été 2024 - En codirection avec :
Optimisation de la conception d'une nouvelle machine à engrenage magnétique axial, par Benidiri,Massinissa
Automne 2024 - En codirection avec :
Conception d'un nouveau moteur à aimants permanents à flux axial, par Zeghdoud,Karim
Été 2024 - En codirection avec :
Conception et optimisation d'un nouvel engrounage magnétique, par Meziani,Raid
Été 2024 - En codirection avec :
Conception d'un nouveau moteur à aimants permanents à flux axial, par Taibi,Abdelbasset
Automne 2024 - En codirection avec :
Conception d'un moteur synchrone à reluctance pour véhicule électrique, par Aissat,Yasmina
Été 2024 - En codirection avec :
Conception d'un moteur à aimants permanents à flux axial à haut rendement, par Ouyed,Lounis
Été 2024 - En codirection avec :
Étude et modélisation d’un système de production hydroélectrique, par Haroun,Mohamed
Automne 2023 - En codirection avec :
Conception et optimisation d'un nouvel engrenage magnétique, par Hammadouche,Yehya
Automne 2023 - En codirection avec :
Modélisation des groupes motopropulseurs de véhicules électriques, par Zoutat,Boualem
Hiver 2022 - En codirection avec :
Modélisation et contrôle de la machine asynchrone, par Belaid,Anis
Automne 2023 - En codirection avec :
Conception d’un moteur à flux axial double rotor pour la propulsion de véhicules électriques, par Boufatah,Abderrahim Ilyes
Été 2024 - En codirection avec :
Conception mécanique d'un engrenage magnétique, par Bounoughaz,Zineddine Zakaria
Automne 2024 - En codirection avec :
Conception et optimisation d'un nouvel engrenage magnétique, par Zouaoua,Slimane
Été 2024 - En codirection avec :
Conception d'un nouveau moteur à aimants permanents à flux axial, par Benbarek,Hichem
Été 2024 - En codirection avec :
Conception d'un moteur synchrone à reluctance pour véhicules électrique, par Hamdani,Rania
Été 2024 - En codirection avec :
Conception d'un moteur à aimant permanent à flux axial et augmentation de ses performances, par Magane,Hocine
Été 2024 - En codirection avec :
Moteurs synchrones à aimants permanents à flux axial, par Fellah,Cilia
Été 2024 - En codirection avec : Shih, Andy
La régulation de vitesse par la commande vectorielle basée sur l'orientation du flux rotorique d’un moteur asynchrone, par Bakel,Lydia
Été 2024 - En codirection avec :
Étude et modélisation d'un système éolien à base d’une GADA, par Zeraoulia,Sabir
Été 2024 - En codirection avec :
Commande PID de la tension d'excitation d'un turboalternateur, par Bouhariche,Abdennasser
Hiver 2024 - En codirection avec :
Conception et optimisation d'un engrenage magnétique coaxial à réluctance, par Rachedi,Fouad
Automne 2023 - En codirection avec :
Conception d'un moteur synchrone à reluctance pour véhicules électriques, par Boudjema,Aiman
Hiver 2024 - En codirection avec :
Conception électromagnétique d'une machine électrique à grande vitesse, par Yezid,Noureddine
Été 2024 - En codirection avec :
Conception électromagnétique d'une machine synchrone à reluctance à grande vitesse, par Ouar,Athmane
Été 2024 - En codirection avec :
Conception électromagnétique d'une machine électrique à grande vitesse, par Zaiadi,Abdelhamid
Été 2024 - En codirection avec :
Conception d'un moteur synchrone à reluctance pour véhicules électriques, par Babanou,Mohammed
Été 2024 - En codirection avec :
Conception électromagnétique d'une machine électrique à grande vitesse, par Bebacar,Abeid El Barka
Automne 2024 - En codirection avec :
Modélisation et commande vectorielle de la machiche asynchrone, par Bensaha,Omar
Été 2024 - En codirection avec :
Optimisation de la conception d'un nouvel engrenage magnétique à couple élevé, par Amor Ouahmed,Abderrahmene
Été 2023 - En codirection avec :
Étude comparative entre deux stratégies DTC sans capteur mécanique pour la machine asynchrone, par Azzaz,Mohamed Aimene
Été 2023 - En codirection avec :
La commande à structure variable de convertisseurs d'énergie (convertisseur Buck), par Zegadi,Ahmed
Été 2023 - En codirection avec :
Étude et simulation d’un convertisseur statique destiné à la commande MPPT, par Ouared,Adel
Été 2023 - En codirection avec :
Conception d'un nouveau moteur à aimants permanents à flux axial, par Rezaiguia,Mohammed Djihad
Été 2024 - En codirection avec :
Conception d'un moteur synchrone à reluctance pour véhicules électriques, par Meliani,Hichem
Été 2024 - En codirection avec :
Le défaut d'excentricité dans la machine synchrone à aimants permanents, par Hansali,Mehdi
Hiver 2024 - En codirection avec :
Conception mécanique d'un engrenage magnétique, par Ouladdaoud,Mounir
Été 2024 - En codirection avec :
Conception mécanique d'une nouvelle machine à engrenages magnétiques axiaux, par Medjdoub,Moussa
Hiver 2024
- En codirection avec :
Stage en électricité et efficacité énergétique, par Rakotomalala,Fy
Hiver 2023
- En codirection avec :
Conception et analyse d'une machine à engrenage magnétique axial, par Aloeyi,Essossinam Frédéric
Automne 2023 - En codirection avec :
Conception d'un moteur roue à aimant permanents à flux axial à haut rendement avec suspension intégrée, par Lex,Martin
Automne 2024
- En codirection avec : Chandra, Ambrish
Self-Compensated Planar Coil for Resonant Wireless Power Transfer Systems, par Zahedi Saadabad,Neda
Automne 2024 - En codirection avec :
Design and Analysis of Axial Magnetic-Geared Motors for Electric Vehicle Propulsion, par Shoaei,Aran
Automne 2024
- En codirection avec :
Conception d'un moteur synchrone à reluctance pour véhicules électriques, par Khelloul,Wissem
Été 2024 - En codirection avec :
Conception et optimisation d'un nouvel engrenage magnétique, par Boujnah,Fouad
Été 2023 - En codirection avec :
Conception mécanique d'un engrenage magnétique, par Megharbi,Hichem
Hiver 2024
Publications
- Nasir Ali, Qingsong Wang, Qiang Gao, Ke Ma. 2024 « Diagnosis of multi-component faults in SRM drives based on auxiliary current reconstruction under soft-switching operation ». IEEE Transactions on Industrial Electronics vol. 71 , nº 3. p. 2265-2276
- Aran Shoaei, Farnam Farshbaf-Roomi, Qingsong Wang. 2024 « Surrogate-based multi-objective optimization of flux-focusing halbach coaxial magnetic gear ». Energies vol. 17 , nº 3
- Nasir Ali, Qingsong Wang, Qiang Gao, Ke Ma. 2023 « Fast detection of power transistor faults in SRM drives based on transient pulse injection ». IEEE Journal of Emerging and Selected Topics in Power Electronics vol. 11 , nº 5. p. 5256-5267
- Aran Shoaei, Qing-Song Wang. 2023 « A comprehensive review of concentric magnetic gears ». IEEE Transactions on Transportation Electrification
- Qingsong Wang, Yu Wu, Shuangxia Niu, Xing Zhao. 2022 « Advances in thermal management technologies of electrical machines ». Energies vol. 15 , nº 9
- Yuan Mao, Shuangxia Niu, Qingsong Wang. 2021 « Design and optimization of a slot-PM-assisted doubly-salient machine based on saturation assuaging ». Chinese Journal of Electrical Engineering vol. 7 , nº 3. p. 65-72
- Junnian Wang, Shoulin Gao, Kai Wang, Yan Wang, Qingsong Wang. 2021 « Wheel torque distribution optimization of four-wheel independent-drive electric vehicle for energy efficient driving ». Control Engineering Practice vol. 110
- Qingsong Wang, Mohammad Ali Saket, Aaron Troy, Martin Ordonez. 2021 « A self-compensated planar coil for resonant wireless power transfer systems ». IEEE Transactions on Power Electronics vol. 36 , nº 1. p. 674-682
- Qingsong Wang, Xing Zhao, Shuangxia Niu. 2021 « Flux-modulated permanent magnet machines : Challenges and opportunities ». World Electric Vehicle Journal vol. 12 , nº 1
- Xing Zhao, Jiang Jifu, Shuangxia Niu, Qingsong Wang. 2021 « Slot-PM-assisted hybrid reluctance generator with self-excited DC source for stand-alone wind power generation ». IEEE Transactions on Magnetics vol. 58 , nº 2
- Qingsong Wang, Xiaodong Zhang, Shuangxia Niu. 2019 « Design of dual-electrical-port DC-coil-free hybrid-excited machines ». IEEE Transactions on Energy Conversion vol. 34 , nº 3. p. 1328-1336
- Chao Guo, Huang Shoudao, Jiabao Wang, Feng Yaojing, Qingsong Wang. 2018 « Design of cryogenic permanent magnet synchronous motor for submerged liquefied natural gas pump ». IEEE Transactions on Magnetics vol. 54 , nº 11
- Qingsong Wang, Shuangxia Niu. 2018 « Design, modeling, and control of a novel hybrid-excited flux-bidirectional-modulated generator-based wind power generation system ». IEEE Transactions on Power Electronics vol. 33 , nº 4. p. 3086-3096
- Qingsong Wang, Shuangxia Niu, T. W. Ching. 2018 « A new double-winding vernier permanent magnet wind power generator for hybrid AC/DC microgrid application ». IEEE Transactions on Magnetics vol. 54 , nº 11
- Qingsong Wang, Shuangxia Niu, Lin Yang. 2018 « Design optimization of a novel scale-down hybrid-excited dual permanent magnet generator for direct-drive wind power application ». IEEE Transactions on Magnetics vol. 54 , nº 3
- Qingsong Wang, Niu Shuangxia. 2018 « A novel DC-coil-free hybrid-excited machine with consequent-pole PM rotor ». Energies vol. 11 , nº 4. p. 700
- Qingsong Wang, Shuangxia Niu. 2017 « A novel hybrid-excited dual-PM machine with bidirectional flux modulation ». IEEE Transactions on Energy Conversion vol. 32 , nº 2. p. 424-435
- Qingsong Wang, Shuangxia Niu. 2017 « Overview of flux-controllable machines: Electrically excited machines, hybrid excited machines and memory machines ». Renewable and Sustainable Energy Reviews vol. 68. p. 475-491
- Qingsong Wang, Shuangxia Niu, Xiang Luo. 2017 « A novel hybrid Dual-PM machine excited by AC with DC bias for electric vehicle propulsion ». IEEE Transactions on Industrial Electronics vol. 64 , nº 9. p. 6908-6919
- Qingsong Wang, Shuangxia Niu, Lin Yang. 2017 « Design optimization and comparative study of novel dual-PM excited machines ». IEEE Transactions on Industrial Electronics vol. 64 , nº 12. p. 9924-9933
- Qingsong Wang, Shuangxia Niu, Shiyou Yang. 2017 « Design optimization and comparative study of novel magnetic-geared permanent magnet machines ». IEEE Transactions on Magnetics vol. 53 , nº 6
- S. L. Ho, Qingsong Wang, Shuangxia Niu, W. N. Fu. 2015 « A novel magnetic-geared tubular linear machine with halbach permanent-magnet arrays for tidal energy conversion ». IEEE Transactions on Magnetics vol. 51 , nº 11
- Qingsong Wang, Shuangxia Niu. 2015 « Electromagnetic design and analysis of a novel fault-tolerant flux-modulated memory machine ». Energies vol. 8 , nº 8. p. 8069-8085
- Qingsong Wang, Shuangxia Niu, Siu Lau Ho, Weinong Fu, Shuguang Zuo. 2015 « Design and analysis of novel magnetic flux-modulated mnemonic machines ». IET Electric Power Applications vol. 9 , nº 7. p. 469-477
- Shuangxia Niu, Qingsong Wang. 2018 « New developments of electrical machines ». In Power Engineering: Advances and Challenges Part B: Electrical Power. p. 1-22. CRC Press
- Essossinam Frederic Aloeyi, Aran Shoaei, Qingsong Wang. 2023 « A hybrid coaxial magnetic gear using flux-focusing halbach permanent magnet arrangement ». IEEE 14th International Conference on Power Electronics and Drive Systems (PEDS) (Montreal, QC, Canada, Aug. 07-10, 2023) Institute of Electrical and Electronics Engineers Inc.
- Aran Shoaei, Qingsong Wang. 2023 « Axial dual-flux-modulator magnetic gear mitigating yoke flux leakage ». 3rd International Conference on Electrical Machines and Drives (ICEMD) (Tehran, Iran, Dec. 20-21, 2023) Institute of Electrical and Electronics Engineers Inc.
- Neda Zahedi, Qingsong Wang, Ambrish Chandra. 2023 « A review of self-compensated wireless power transfer system ». IEEE 14th International Conference on Power Electronics and Drive Systems (PEDS) (Montreal, QC, Canada, Aug. 07-10, 2023) Institute of Electrical and Electronics Engineers Inc.
- Neda Zahedi, Qingsong Wang, Ambrish Chandra. 2023 « Comparative study of self-compensated coil geometries for wireless power transfer system ». IEEE 14th International Conference on Power Electronics and Drive Systems (PEDS) (Montreal, QC, Canada, Aug. 07-10, 2023) Institute of Electrical and Electronics Engineers Inc.
- Nasir Ali, Qingsong Wang, Qiang Gao, Ke Ma. 2022 « Single-sensor based low-cost current control in SRM drives for electric vehicle applications ». IEEE Transportation Electrification Conference and Expo, Asia-Pacific, ITEC Asia-Pacific (Haining, China, Oct. 28-31, 2022) Institute of Electrical and Electronics Engineers Inc.
- Essossinam Frederic Aloeyi, Nasir Ali, Qingsong Wang. 2022 « A review of in-wheel motors for electric vehicle propulsion ». IEEE Transportation Electrification Conference and Expo, Asia-Pacific, ITEC Asia-Pacific (Haining, China, Oct. 28-31, 2022) Institute of Electrical and Electronics Engineers Inc.
- Aran Shoaei, Qingsong Wang. 2022 « A high torque density flux-focusing halbach magnetic gear for electric vehicle applications ». 1st IEEE Industrial Electronics Society Annual On-Line Conference, ONCON (Kharagpur, India, Dec. 09-11, 2022) Institute of Electrical and Electronics Engineers
- Kehinde R. Kamil, Jemilat I. Kamil, Qingsong C. Wang. 2021 « Optimization of flux switching permanent magnet motor to enhance the traction of an electric vehicle ». 12th International Renewable Energy Congress (IREC) (Hammamet, Tunisia, Oct. 26-28, 2021) Institute of Electrical and Electronics Engineers Inc.
- Weiyu Wang, Xing Zhao, Sigao Wang, Shuangxia Niu, Qingsong Wang. 2021 « Design and analysis of a ferrite-PM-assisted hybrid reluctance machine for electric vehicle propulsion ». IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society (Toronto, ON, Canada, Oct. 13-16, 2021) IEEE Computer Society
- Qingsong Wang, Petar Igic, Shuangxia Niu, Junnian Wang. 2020 « A new dual-PM excited doubly salient machine for traction applications ». 2nd IEEE International Conference on Industrial Electronics for Sustainable Energy Systems (IESES) (Cagliari, Sardinia, Italy, Sept. 01-03, 2020) IEEE
- Qingsong Wang, Petar Igic, Shuangxia Niu, Junnian Wang. 2020 « Influence of rotor pole number on performance of novel slot permanent magnet machines with complementary rotors ». 2nd IEEE International Conference on Industrial Electronics for Sustainable Energy Systems (IESES) (Cagliari, Sardinia, Italy, Sept. 01-03, 2020) Institute of Electrical and Electronics Engineers Inc.
- Shuangxia Niu, Qingsong Wang, Xing Zhao. 2019 « A novel DC bias excited machine with integrated winding ». 22nd International Conference on Electrical Machines and Systems (ICEMS) (Harbin, China, Aug. 11-14, 2019) IEEE
- Qingsong Wang, Martin Ordonez, Wang Junnian, Mohammad Ali Saket, Rouhollah Shafaei. 2019 « A novel dual slot permanent magnet machine with complementary rotors for electric vehicle propulsion ». IEEE 28th International Symposium on Industrial Electronics (ISIE) (Vancouver, BC, Canada, June 12-14, 2019) IEEE
- Qingsong Wang, Shuangxia Niu. 2017 « Design optimization and comparative analysis of dual-stator flux modulation machines ». 43rd Annual Conference of the IEEE Industrial Electronics Society (IECON) (Beijing, China, Oct. 29 - Nov. 01, 2017) IEEE
- Qingsong Wang, Shuangxia Niu. 2016 « A novel hybrid-excited flux bidirectional modulated machine for electric vehicle propulsion ». IEEE Vehicle Power and Propulsion Conference (VPPC) (Hangzhou, China, Oct. 17-20, 2016) IEEE
August 25, 2021
Driving Transportation to Electrification
August 18, 2021