October 28, 2020
Philippe Causse
Professeur
Department
Département de génie des systèmes
Degrees
B.Ing., M.Sc.., Ph.D. (Polytechnique Montréal)
Office
A-3649
Research axe
- Aeronautics and Aerospace
Areas of expertise
- Matériaux composites
- Développement et optimisation des procédés de fabrication
- Simulation numérique et fabrication virtuelle
- Caractérisation des matériaux
Supervision
- En codirection avec :
Analyse expérimentale d'un procédé à haute cadence pour la fabrication de structures composites aéronautiques, par Naghbal,El Mehdi
Été 2024
- En codirection avec :
Analyse de la porosité et des performances mécaniques de matériaux composites mis en forme par des procédés d'injection sur renforts, par Bannour,Mariem
Été 2024
- En codirection avec :
Fabrication de structures composites par un procédé haute cadence pour la mobilité aérienne du futur, par Naghbal,El Mehdi
Été 2024
- En codirection avec : Béguin, Cédric
Development and Application of an Intelligent Sensing and Controlling System Embedded in the Membrane Used in the Flexible Injection Process, par Zelaya Matamoros,Ariana Fabiola
Été 2024 - En codirection avec : Jihui, Wang
Analysis and Development of Injection Processes to Manufacture Large Foam Core Composite Sandwich Structures, par Feng,Yuwei
Automne 2024
- En codirection avec :
Rapport de stage, par Voyer,Julien
Automne 2022
- En codirection avec : Joncas, Simon
Amélioration d'un procédé d'imprégnation VPI pour la fabrication d'un condensateur sec haute tension, par Remy-Lorit,Théo
Été 2021
Publications
- Yuwei Feng, Philippe Causse, Jihui Wang, François Trochu. 2022 « A coupled 1D/2D co simulation approach for flow pattern of fiber reinforced composite in the VARTM process ». Affiche présentée lors de la conférence : Colloque du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance (CREPEC) (Montreal, QC, Canada, 08 déc. 2022)
- Yixun Sun, Cédric Béguin, Philippe Causse, Brahim Benmokrane, François Trochu. 2022 « Convective heat transfer between a bead packing and its bounding wall ». Affiche présentée lors de la conférence : Journée du génie par la simulation (Montreal, QC, Canada, May 20, 2022)
- Bin Yang, François Trochu, Cédric Béguin, Jihui Wang, Philippe Causse. 2022 « Tomographic modelling of engineering textiles for numerical simulation: A parametric approach ». Affiche présentée lors de la conférence : Colloque du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance (CREPEC) (Montreal, QC, Canada, 08 déc. 2022)
- Bin Yang, Yixum Sun, François Trochu, Cédric Béguin, Jihui Wang, Philippe Causse. 2023 « Performance evaluation of unidirectional molds used for measuring saturated transverse permeability of engineering textiles ». Composites Part A: Applied Science and Manufacturing vol. 169
- Zaynab Grofti, Bruno Croteau-Labouly, Rachid Boukhili, Philippe Causse, Salim Belouettar, Henri Perrin, François Trochu. 2022 « Simultaneous characterization of preform expansion and permeability in vacuum assisted resin infusion ». Polymer Composites vol. 43 , nº 6. p. 3560-3573
- Yinxun Sun, Cédric Beguin, Philippe Causse, Brahim Benmokrane, François Trochu. 2022 « Convective heat transfer between a bead packing and its bounding wall: Part I-Theory ». Transport in Porous Media vol. 143 , nº 2. p. 397-416
- Yixun Sun, Cédric Beguin, Philippe Causse, Brahim Benmokrane, François Trochu. 2022 « Convective heat transfer between a bead packing and its bounding wall: Part II-Numerical analysis and experimental validation ». Transport in Porous Media vol. 143 , nº 1. p. 1-22
- Yixun Sun, Cédric Béguin, Philippe Causse, Brahim Benmokrane, François Trochu. 2022 « Experimental and numerical investigation of wall temperature in a heated pipe filled with beads ». International Journal of Heat and Mass Transfer vol. 192
- Bin Yang, Wei Huang, Philippe Causse, Cédric Beguin, Jihui Wang, François Trochu. 2022 « On the design of test molds based on unidirectional saturated flows to measure transverse permeability in liquid composite molding ». Polymer Composites vol. 43 , nº 4. p. 2234-2251
- Igor Belot, Yisun Sun, David Vidal, Martin Votsmeier, Philippe Causse, François Trochu, François Bertrand. 2021 « A 3D additive manufacturing approach for the validation of a numerical wall-scale model of catalytic particulate filters ». Chemical Engineering Journal vol. 405
- A. X. H. Yong, A. Aktas, D. May, A. Endruweit, S. Advani, P. Hubert, S. G. Abaimov, D. Abliz, I. Akhatov, M. A. Ali, T. Allen, D. C. Berg, S. Bickerton, C. Brauner, D. Brütsch, B. Caglar, H. Caglar, P. Causse, A. Chiminelli, A. Cohades, S. Comas-Cardona, M. Danzi, J. Dittmann, C. Dransfeld, P. Ermanni, E. Fauster, J. A. Garcia-Manrique, A. George, R. Graupner, V. Grishaev, A. Guilloux, M. Hancioglu, W. Harizi, T. Herman, W. Huang, M. A. Kabachi, A. Keller, K. Kind, M. Laspalas, O. V. Lebedev, M. Lizaranzu, A. C. Long, K. Masania, V. Michaud, P. Middendorf, D. Salvatori, R. Schubnel, N. Sharp, M. Sozer, J. Thomas, F. Trochu, R. Umer, J. Valette, J. H. Wang, B. Willenbacher. 2021 « Out-of-plane permeability measurement for reinforcement textiles: A benchmark exercise ». Composites Part A: Applied Science and Manufacturing vol. 148
- A. X. H. Yong, A. Aktas, D. May, A. Endruweit, S. V. Lomov, S. Advani, P. Hubert, S. G. Abaimov, D. Abliz, I. Akhatov, M. A. Ali, S. Allaoui, T. Allen, D. C. Berg, S. Bickerton, B. Caglar, P. Causse, A. Chiminelli, S. Comas-Cardona, M. Danzi, J. Dittmann, C. Dransfeld, P. Ermanni, E. Fauster, A. George, J. Gillibert, Q. Govignon, R. Graupner, V. Grishaev, A. Guilloux, M. A. Kabachi, A. Keller, K. Kind, D. Large, M. Laspalas, O. V. Lebedev, M. Lizaranzu, A. C. Long, C. López, K. Masania, V. Michaud, P. Middendorf, P. Mitschang, S. van Oosterom, R. Schubnel, N. Sharp, P. Sousa, F. Trochu, R. Umer, J. Valette, J. H. Wang. 2021 « Experimental characterisation of textile compaction response: A benchmark exercise ». Composites Part A: Applied Science and Manufacturing vol. 142
- Claudio Di Fratta, Yixum Sun, Philippe Causse, François Trochu. 2020 « A dimensionless characteristic number for process selection and mold design in composites manufacturing: Part I—Theory ». Journal of Composites Science vol. 4 , nº 1
- Claudio Di Fratta, Yixun Sun, Philippe Causse, François Trochu. 2020 « A dimensionless characteristic number for process selection and mold design in composites manufacturing: Part II—Applications ». Journal of Composites Science vol. 4 , nº 1
- W. Huang, P. Causse, H. Hu, S. Belouettar, F. Trochu. 2020 « Transverse compaction of 2D glass woven fabrics based on material twins – Part I: Geometric analysis ». Composite Structures vol. 237
- W. Huang, P. Causse, H. Hu, S. Belouettar, F. Trochu. 2020 « Transverse compaction of 2D glass woven fabrics based on material twins – Part II: Tow and fabric deformations ». Composite Structures vol. 237
- Wei Huang, Philippe Causse, Heng Hu, François Trochu. 2020 « Numerical and experimental investigation of saturated transverse permeability of 2D woven glass fabrics based on material twins ». Polymer Composites vol. 41 , nº 4. p. 1341–1355
- Yixun Sun, Philippe Causse, Brahim Benmokrane, François Trochu. 2020 « Permeability measurement of granular porous materials by a modified falling-head method ». Journal of Engineering Mechanics vol. 146 , nº 9
- W. Huang, P. Causse, V. Brailovski, H. Hu, F. Trochu. 2019 « Reconstruction of mesostructural material twin models of engineering textiles based on Micro-CT Aided Geometric Modeling ». Composites Part A: Applied Science and Manufacturing vol. 124
- Wei Huang, Qun Huang, Yin Liu, Jie Yang, Heng Hu, François Trochu, Philippe Causse. 2019 « A Fourier based reduced model for wrinkling analysis of circular membranes ». Computer Methods in Applied Mechanics and Engineering vol. 345. p. 1114-1137
- Anna Madra, Philippe Causse, François Trochu, Jérôme Adrien, Eric Maire, Piotr Breitkopf. 2019 « Stochastic characterization of textile reinforcements in composites based on X-ray microtomographic scans ». Composite Structures vol. 224
- Philippe Causse, Christophe Ravey, François Trochu. 2018 « Capillary characterization of fibrous reinforcement and optimization of injection strategy in resin transfer molding ». Journal of Composites Science vol. 2 , nº 2
- Beliny Bonnard, Philippe Causse, François Trochu. 2017 « Experimental characterization of the pore size distribution in fibrous reinforcements of composite materials ». Journal of Composite Materials vol. 51 , nº 27. p. 3807-3818
- Philippe Causse, Ed Ruiz, François Trochu. 2013 « Influence of preforming on the quality of curved composite parts manufactured by flexible injection ». International Journal of Material Forming vol. 6 , nº 3. p. 341-362
- Philippe Causse, Edu Ruiz, François Trochu. 2012 « Spring-in behavior of curved composites manufactured by Flexible Injection ». Composites Part A: Applied Science and Manufacturing vol. 43 , nº 11. p. 1901-1913
- Philippe Causse, Edu Ruiz, François Trochu. 2011 « Experimental study of flexible injection to manufacture parts of strong curvature ». Polymer Composites vol. 32 , nº 6. p. 882-895
- Bin Yang, Jihui Wang, Philippe Causse, Cédric Béguin, François Trochu. 2023 « On the meso-structure spatial variability characterizing and geometric modelling of textile-based composite via volume imaging ». Communication lors de la conférence : ICCM International Conferences on Composite Materials (Belfast, Ireland, July 30-Aug. 04, 2023)
- F. Trochu, B. Yang, J. Wang, C. Béguin, P. Causse. 2022 « Creation of digital material twin (dmt) geometric models of high performance composites based on x-ray microtomography ». 20th European Conference on Composite Materials: Composites Meet Sustainability, ECCM (Lausanne, Suisse, June 26-30, 2022) Ecole Polytechnique Federale de Lausanne (EPFL)
- F. Anne, C. Béguin, S. Etienne, P. Causse, D. Scott, L. Bornard. 2019 « Void fraction and bubble size measurement inside clouds of air bubbles in flowing water ». 38th IAHR World Congress : 'Water – Connecting the World" (Panama city, Panama, Sept. 01-06, 2019) IAHR
- P. Causse, F. Trochu. 2018 « Combined characterization of pore size distribution and permeability in fibrous textiles by capillary flow porometry ». 14th International Conference on Flow Processing in Composite Materials (Lulea, Switzerland, May 30 - June 01, 2018)
- F. Trochu, S. Hilal, W. Huang, Y. Sun, P. Causse, V. Brailovski. 2018 « Reconstruction and data compression of three-dimensional composite fiber architecture from microtomographic images ». 7th International Symposium on Air/Craft Materials (ACMA) (Compiègne, France, Apr. 24-26, 2018)
- B. Bonnard, P. Causse, F. Trochu. 2017 « Characterization of fibrous reinforcements by capillary flow porometry: influence of fiber volume fraction ». 10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century (CANCOM) (Ottawa, ON, Canada, July 17-20, 2017)
- B. Bonnard, P. Causse, F. Trochu. 2016 « Experimental investigation of capillary flow porometry for characterization of dual scale porosity in fibrous reinforcements ». 13th International Conference on Flow Processing in Composite Materials (Kyoto, Japan, July 06-08, 2016)
- M. Benavente, P. Causse, N. Vernet, L. Marcin, T. Godon, E. Ruiz. 2015 « Residual stresses in 3D interlock composites: characterization and simulation ». 6th International Conference on Science and Technology of Composite Materials (COMAT) (Buenos Aires, Argentina, May 07-08, 2015)
- H. Courteau-Godmaire, E. R. Fotsing, P. Causse, M. Lévesque, E. Ruiz. 2015 « Numerical modeling of resin shrinkage around insert in composite sandwich panels ». 20th International Conference on Composite Materials (ICCM) (Copenhagen, Denmark, July 19-24, 2015) International Committee on Composite Materials
- P. Causse, E. Ruiz, F. Trochu. 2013 « Processing warpage of asymmetric composite panels manufactured by resin transfer molding ». 19th International Conference on Composite Materials (ICCM) (Montréal, QC, Canada, July 28 - Aug. 02, 2013) International Committee on Composite Materials
- J. Renaud, P. Causse, E. Ruiz, F. Trochu. 2013 « A study of consolidation equilibrium in composites made by flexible injection ». 19th International Conference on Composite Materials (ICCM) (Montréal, QC, Canada, July 28 - Aug. 02, 2013) International Committee on Composite Materials
- P. Causse, E. Ruiz, F. Trochu. 2011 « Analysis of fiber preforming for improved manufacturing of curved parts by flexible injection ». 18th International Conference on Composites Materials (ICCM) (Jeju, Korea, Republic of, Aug. 21-26, 2011) International Committee on Composite Materials
- P. Causse, E. Ruiz, F. Trochu. 2011 « Fabrication of curved parts by flexible injection: Influence of processing conditions on composite quality and analysis of distortion ». Proceedings of the American Society for Composites 2011-Twenty-Sixth Technical Conference (2011) (Montreal, QC, Canada, Sept. 26-28, 2011) DEStech Publications
- P. Causse, E. Ruiz, F. Trochu. 2010 « Thermoplastic spring-in of curved composite parts manufactured by flexible injection ». Proceedings of the Eighth Joint Canada-Japan Workshop on Composites : Design, Manufacturing and Applications of Composites (Montréal, Canada, July 26-28, 2010) DEStech Publications, inc.