April 17, 2024
Martine Dubé
Professeure
Department
Département de génie mécanique
Degrees
B.Ing., M.Ing. (Polytechnique Montréal), Ph.D. (McGill)
Office
A-1918
Email
Overview
Dubé, Martine
Research units
Areas of expertise
- Mise en forme des composites thermoplastiques
- Soudage de composites thermoplastiques
- Recyclage
- Réparations
Supervision
- En codirection avec : Joncas, Simon
Développement et caractérisation du soudage par induction en continu utilisant un suscepteur électromagnétique mobile, par Bobet,Corentin
Automne 2020 - En codirection avec :
Développement de méthodes analytiques pour un outil de dimensionnement de cadre de fuselage en matériaux composites, par Sauvé,Jérémie
Hiver 2014 - En codirection avec : Ngô, Anh Dung
Étude exploratoire sur le comportement en fatigue d'un composite à renfort tissé, par Cardonne,Martin
Automne 2014 - En codirection avec :
Modélisation et étude expérimentale du soudage par induction de composites thermoplastiques, par Gouin O'Shaughnessey,Patrice
Automne 2014 - En codirection avec : Chatelain, Jean-François
Influence de la pression de mise en forme sur le détourage de stratifiés carbone/époxy, par Coulon,Pierre
Automne 2013 - En codirection avec :
Estampage de composites thermoplastiques hautes performances à base de carbone/PPS pour des applications aéronautiques, par Jamin,Thibault
Été 2014 - En codirection avec : Demarquette, Nicole R.
Conception et fabrication du bord de fuite de l'aube d'une turbine hydraulique, par Bilton,Kevin
Hiver 2016 - En codirection avec :
Développement de méthodes de réparation des composites à matrice thermoplastique utilisant le soudage par induction, par Vaur,Romain
Été 2015 - En codirection avec : Terriault, Patrick
Optimisation des performances d'une structure de composite actionnée par des fils en alliages à mémoire de forme, par Poulin-Masson,Jean-René
Hiver 2016 - En codirection avec : Dano, Marie-Laure
Réparation de composites à matrice thermoplastique en utilisant la soudure par induction, par Côté,Nicolas
Hiver 2018 - En codirection avec : Lessard, Larry
Conception et fabrication d'un instrument de musique en fibre naturelle, par Chabot,Olivier
Été 2022 - En codirection avec : Lessard, Larry
Valorisation des rebuts de production à base de fibre de verre des pales d'éoliennes, par Moreau,Charles-Olivier
Été 2024 - En codirection avec : Lachance-Tremblay, Éric
Caractérisation de matériaux composites à matrice polyuréthane et charges recyclées, par Poirier,Daniel
Été 2024 - En codirection avec : Tabiai, Ilyass
De la barbe à papa aux masques médicaux : le filage par jet rotatif à chaud de matériaux de filtration pour protéger les travailleurs de première ligne, par Gunther,Jason
Automne 2023 - En codirection avec : Mathieu, Yves
Soudage et réparation de composites thermoplastiques par chauffe par induction, par Dickson,Julien
Été 2021 - En codirection avec :
Recyclage des chutes de composites thermoplastiques pré-imprégnés, par Pattery,Hanae
Automne 2024 - En codirection avec : Tabiai, Ilyass
Valorisation des rebuts de production de préimprégnés composites/thermoplastiques pour la fabrication additive, par Richard Soucy,Ruan-Isabelle
Été 2024 - En codirection avec : Laberge-Lebel, Louis
Thermoformage de composites thermoplastiques pour la fabrication de composantes de vélos, par Girouard-Laflamme,Émile
Automne 2024 - En codirection avec : Laberge-Lebel, Louis
Conception et fabrication d'une composante d'intérieur d'avion à base de composites thermoplastiques à fibres discontinues, par Léveillé,Francis
Automne 2021 - En codirection avec : Lachance-Tremblay, Éric
Développement d'une dalle de toit-terrasse polymérique avec fort contenu en matières recyclées, par Kozlow,Constantin
Été 2024
- En codirection avec :
Amélioration de procédés liés aux matériaux composites, par Lanaspeze,François
Été 2019 - En codirection avec :
Étude de la ténacité des joints soudés par induction dans les matériaux composites thermoplastiques, par Magnin,Maxime
Hiver 2017 - En codirection avec :
Ingénierie C-Series, innovation manufacturière et composites, par Boyer,Bastien
Hiver 2018
- En codirection avec :
Soudage par laser d'une mousse thermoplastique, par Margat,Simon
Hiver 2021 - En codirection avec : Ngô, Anh Dung
Conception, fabrication et validation d'une chambre environnementale à température et humidité contrôlées, par Trad,Mohamed-Salmane
Automne 2013 - En codirection avec : Ngô, Anh Dung
Étude expérimentale sur le comportement en flexion du composite époxy à renfort tissé en carbone comportant des défauts de fabrication, par Filleul,Pierre-Xavier
Été 2015 - En codirection avec :
Développement de nouveaux éléments chauffants nanostructurés pour le soudage de matériaux composites par induction, par Janier,Mathieu
Automne 2015 - En codirection avec : Tabiai, Ilyass
Filage rotatif à chaud et compostabilité de polymères biodégradables pour la fabrication de textiles non tissés, par Hafid,Naila
Automne 2023 - En codirection avec :
Suscepteurs ferro-magnétiques pour le soudage par induction de composites thermoplastiques en utilisant la chauffe par hystérésis, par Renault,Baptiste
Été 2023 - En codirection avec : Tabiai, Ilyass
Effet de la rugosité induite par le procédé d'impression 3D dépôt de filament fondu (DFF) sur les propriétés en traction des pièces imprimées 3D, par Dongmo Tsafack,Leonel
Automne 2023 - En codirection avec : Tabiai, Ilyass
Analyse micro-CT de composites moulés à partir de flocons de fibre de carbone discontinue, par Kamtchueng Choula,Merlin
Automne 2023 - En codirection avec : Tabiai, Ilyass
Effet de la géométrie de la buse et de la vitesse d'extrusion sur les propriétés du filament et la résistance à la soudure dans la fabrication par filament fondu, par Vassal,Orlane
Hiver 2023 - En codirection avec : Tabiai, Ilyass
Étude du contact sur le lit lors de l’impression 3D des polymères thermoplastiques, par El Kabriti,Sara
Automne 2023
- En codirection avec : Ghiasi, Hossein
Effect of Multiple Defects in Stringer Corner RADII, par Forgeois,Julien
Automne 2019 - En codirection avec : Baillargeon Magnan, Bruno
Développement d'un outil et recherches pour la conception de composants de finition intérieure dans le cockpit d'avions Challenger 350, par Byhet,Roxane
Automne 2020 - En codirection avec : Tabiai, Ilyass
Étude de différents adhésifs pour le collage de supports en plastiques sur des pièces en matériaux composites, par Et Tabti,Karim
Été 2023 - En codirection avec : Tabiai, Ilyass
Production de masse de pièces unitaires en composites thermoplastiques soudées par induction, par El Maache,Rim
Automne 2023 - En codirection avec :
Mise au point de la soudure laser en continu pour des conduits composite thermoplastique 3D, par Atonfack Sontia,Thibaut
Automne 2022
- En codirection avec : Dolez, Patricia
Développement de matériaux à base de fibres naturelles pour des applications dans le bâtiment, par Arfaoui,Mohamed Ameur
Hiver 2017 - En codirection avec : Ngô, Anh Dung
Effets des conditions environnementales sur le comportement de la fatigue axiale en tension-compression d'un composite d'époxy à renfort tissé en carbone comportant un défaut artificiel, par Deluy,Marc-Claudel
Été 2021 - En codirection avec : Gosselin, Frédérick
3D Printing of Polymer/Regolith Composites to Recycle Food Packaging Materials on the Moon, par Moazen,Sare
Automne 2024 - En codirection avec : Laberge-Lebel, Louis
Impact des conditions environnementales sur la performance mécanique de composites thermoplastiques soudés par résistance avec un élément chauffant modifié, par Rohart,Vincent
Automne 2020 - En codirection avec :
Recyclage de chutes de composites thermoplastiques pré-imprégnés par thermoformage-estampage, par Sauvé,Carl-Olivier
Automne 2024 - En codirection avec : Tavares, Jason Robert
Induction Welding of 3D-Printed Core to Composite Facesheets with New Electromagnetic, par Martin,Romain
Été 2024 - En codirection avec : Tabiai, Ilyass
Prediction of Macroscopic Properties and Dimensional Accuracy of FDM Printed Part Through a Comprehensive Model Including Bonding, Microstructure and Rheology, par Shokrollahi,Maryam
Automne 2024
- En codirection avec :
Étude de la ténacité des joints soudés par induction dans les matériaux composites thermoplastiques, par Magnin,Maxime
Hiver 2017 - En codirection avec : Tabiai, Ilyass
Extrudeuse de granules pour les imprimantes 3D de bureau permettant l'impression de polyéthylène polydisperse pour applications de recyclage dans l'espace, par Mokrim,Soulaymane
Automne 2022 - En codirection avec : Gosselin, Frédérick
Simulation thermique d'une astromobile pendant la nuit lunaire, par Champain,Caroline
Été 2023
- En codirection avec :
Ingénierie C-Series, innovation manufacturière et composites, par Boyer,Bastien
Hiver 2018 - En codirection avec :
Stagiaire en ingénierie manufacturière et innovations - matériaux composites, par Lanaspeze,François
Été 2019 - En codirection avec :
Stage industriel - Soutien en ingénierie, par Gardie,Simon
Été 2023 - En codirection avec : Tabiai, Ilyass
Design hydraulique de turbines hydroélectriques, par Hzami,Ilyes
Été 2022
Publications
- Julieta Barroeta Robles, M. Rahmat, Y. Wang, M. Dubé, P. Hubert, A. Yousefpour. 2023 « Repair of impacted CF/PEEK specimens at different energy levels ». Affiche présentée lors de la conférence : ICCM International Conferences on Composite Materials (Belfast, Ireland, July 30-Aug. 04, 2023)
- Romain Vaur, Nicolas Côté, Martine Dubé, Marie-Laure Dano, Marie-Josée Potvin. 2015 « Repair of thermoplastic composite structures using induction welding ». Affiche présentée lors de la conférence : Colloque du Centre de Recherche sur les Systèmes Polymères et Composites à haute performance (CREPEC) (Montréal, QC, Canada, 5 juin 2015)
- Vincent Rohart, Louis Laberge Lebel, Martine Dubé. 2018 « Better Knowledge of Aging Welded Composites ». Substance ÉTS
- Vincent Rohart, Louis Laberge Lebel, Martine Dubé. 2018 « Mieux connaître le vieillissement des composites soudés ». Substance ÉTS
- R. G. Martin, C. Johansson, J. R. Tavares, M. Dubé. 2024 « Manufacturing of thermoplastic composite sandwich panels using induction welding under vacuum ». Composites Part A: Applied Science and Manufacturing vol. 182
- J. Barroeta Robles, M. Dubé, P. Hubert, A. Yousefpour. 2023 « Healing study of poly (ether-imide) and poly ether ether ketone using resin films and a parallel plate rheometer ». Composites Part A: Applied Science and Manufacturing vol. 174
- Jason Gunther, Jacques Lengaigne, Mélanie Girard, Valérie Toupin-Guay, James T. Teasdale, Martine Dubé, Ilyass Tabiai. 2023 « A versatile hot melt centrifugal spinning apparatus for thermoplastic microfibres production ». HardwareX vol. 15
- Romain G. Martin, Martin Figueiredo, Christer Johansson, Jason R. Tavares, Martine Dubé. 2023 « Characterization of magnetic susceptor heating rate due to hysteresis losses in thermoplastic welding ». SAMPE Journal vol. 59 , nº 5. p. 19-27
- J. Barroeta Robles, M. Dubé, P. Hubert, A. Yousefpour. 2022 « Repair of thermoplastic composites: an overview ». Advanced Manufacturing: Polymer and Composites Science vol. 8 , nº 2. p. 68-96
- Olivier Chabot, Larry Lessard, Martine Dubé. 2022 « A novel flax fibre composite material for stringed instrument fingerboards ». Journal of Reinforced Plastics and Composites vol. 41 , nº 17-18. p. 670-678
- F. Lessard, M. Dubé, L. Laberge Lebel. 2022 « A comprehensive model of the deconsolidation behaviour of unidirectional carbon fibre reinforced thermoplastic composites ». Composites Part A: Applied Science and Manufacturing vol. 163
- F. Lessard, M. Dubé, L. Laberge Lebel. 2022 « A model of multi-die thermoplastic pultrusion ». Composites Part B: Engineering vol. 247
- Romain Georges Martin, Christer Johansson, Jason Robert Tavares, Martine Dubé. 2022 « Material selection methodology for an induction welding magnetic susceptor based on hysteresis losses ». Advanced Engineering Materials vol. 24 , nº 3
- David Brassard, Martine Dubé, Jason R. Tavares. 2021 « Modelling resistance welding of thermoplastic composites with a nanocomposite heating element ». Journal of Composite Materials vol. 55 , nº 5. p. 625-639
- Marc-Claudel Deluy, Mohamed Khay, Anh Dung Ngo, Martine Dubé, Rajamohan Ganesan. 2020 « Effects of environmental conditions on the axial tensioncompression fatigue behavior of carbon/epoxy plain-weave laminates containing flaws ». Journal of Composite Materials vol. 54 , nº 27. p. 4215-4230
- Vincent Rohart, Louis Laberge Lebel, Martine Dubé. 2020 « Improved adhesion between stainless steel heating element and PPS polymer in resistance welding of thermoplastic composites ». Composites Part B: Engineering vol. 188. p. 72-83
- Vincent Rohart, Louis L. Lebel, Martine Dubé. 2020 « Influence of freeze/thaw cycling on the mechanical performance of resistance-welded carbon fibre/polyphenylene sulphide composite joints ». Journal of Reinforced Plastics and Composites vol. 39 , nº 21-22
- Vincent Rohart, Louis Laberge Lebel, Martine Dubé. 2020 « Effects of environmental conditions on the lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ». Composites Part B: Engineering vol. 198
- Mohamed Ameur Arfaoui, Patricia I. Dolez, Martine Dubé, Éric David. 2019 « Preparation of a hydrophobic recycled jute-based nonwoven using a titanium dioxide/stearic acid coating ». Journal of the Textile Institute vol. 110 , nº 1. p. 16-25
- David Brassard, Martine Dubé, Jason R. Tavares. 2019 « Resistance welding of thermoplastic composites with a nanocomposite heating element ». Composites Part B: Engineering vol. 165. p. 779-784
- V. Rohart, M. Dubé, L. Laberge Lebel. 2019 « Lap shear strength effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ». SAMPE Journal vol. 55 , nº 3. p. 30-37
- Rouhollah Dermanaki Farahani, Martine Dubé. 2018 « Printing polymer nanocomposites and composites in three dimensions ». Advanced Engineering Materials vol. 20 , nº 2
- Farahani Rouhollah Dermanaki, Mathieu Janier, Martine Dubé. 2018 « Conductive films of silver nanoparticles as novel susceptors for induction welding of thermoplastic composites ». Nanotechnology vol. 29 , nº 12
- M. A. Arfaoui, P. I. Dolez, M. Dubé, É. David. 2017 « Development and characterization of a hydrophobic treatment for jute fibres based on zinc oxide nanoparticles and a fatty acid ». Applied Surface Science vol. 397. p. 19-29
- Rouhollah Dermanaki Farahani, Martine Dubé. 2017 « Novel heating elements for induction welding of carbon fiber/polyphenylene sulfide thermoplastic composites ». Advanced Engineering Materials vol. 19 , nº 11
- Jean-René Poulin, Patrick Terriault, Martine Dubé, Pierre-Luc Vachon. 2017 « Development of a morphing wing extrados made of composite materials and actuated by shape memory alloys ». Journal of Intelligent Material Systems and Structures vol. 28 , nº 11. p. 1437-1453
- Rouhollah D. Farahani, Martine Dubé, Daniel Therriault. 2016 « Three-dimensional printing of multifunctional nanocomposites: manufacturing techniques and applications ». Advanced Materials vol. 28 , nº 28. p. 5794-5821
- Patrice Gouin O'Shaughnessey, Martine Dubé, Irene Fernandez Villegas. 2016 « Modeling and experimental investigation of induction welding of thermoplastic composites and comparison with other welding processes ». Journal of Composite Materials vol. 50 , nº 21. p. 2895-2910
- Thibault Jamin, Martine Dubé, Louis Laberge Lebel. 2016 « Effect of stamp-forming parameters and bend radius on the mechanical performance of curved beam carbon fiber/polyphenylene sulfide specimens ». Journal of Composite Materials vol. 50 , nº 9. p. 1213-1225
- Soroush Asgarinia, Chanvit Viriyasuthee, Steven Phillips, Martine Dubé, Joris Baets, Aart Van Vuure, Ignaas Verpoest, Larry Lessard. 2015 « Tension-tension fatigue behaviour of woven flax/epoxy composites ». Journal of Reinforced Plastics and Composites vol. 34 , nº 11. p. 857-867
- Adrien Boulle, Martine Dubé, Frédérick P. Gosselin. 2015 « Parametric study of an elliptical fuselage made of a sandwich composite structure ». Mechanics Research Communications vol. 69. p. 129-135
- Martine Dubé, Aurélie Chazerain, Pascal Hubert, Ali Yousefpour, Harald E. N. Bersee. 2015 « Characterization of resistance-welded thermoplastic composite double-lap joints under static and fatigue loading ». Journal of Thermoplastic Composite Materials vol. 28 , nº 6. p. 762-776
- Edith Talbot, Pascal Hubert, Martine Dubé, Ali Yousefpour. 2013 « Optimization of thermoplastic composites resistance welding parameters based on transient heat transfer finite element modeling ». Journal of Thermoplastic Composite Materials vol. 26 , nº 5. p. 699-717
- Martine Dubé, Pascal Hubert, Jan N. A. H. Gallet, Darko Stavrov, Harald E. N. Bersee, Ali Yousefpour. 2012 « Metal mesh heating element size effect in resistance welding of thermoplastic composites ». Journal of Composite Materials vol. 46 , nº 8. p. 911-919
- Martine Dubé, Véronique Doquet, Andrei Constantinescu, Daniel George, Yves Rémond, Saïd Ahzi. 2010 « Modeling of thermal shock-induced damage in a borosilicate glass ». Mechanics of Materials vol. 42 , nº 9. p. 863-872
- M. Dubé, P. Hubert, A. Yousefpour, J. Denault. 2009 « Fatigue failure characterisation of resistance-welded thermoplastic composites skin/stringer joints ». International Journal of Fatigue vol. 31 , nº 4. p. 719-725
- M. Dubé, P. Hubert, A. Yousefpour, J. Denault. 2008 « Current leakage prevention in resistance welding of carbon fibre reinforced thermoplastics ». Composites Science and Technology vol. 68 , nº 6. p. 1579-1587
- Martine Dubé, Pascal Hubert, Jan N. A. H. Gallet, Darko Stavrov, Harald E. N. Bersee, Ali Yousefpour. 2008 « Fatigue performance characterisation of resistance-welded thermoplastic composites ». Composites Science and Technology vol. 68 , nº 7–8. p. 1759-1765
- M. Dubé, P. Hubert, A. Yousefpour, J. Denault. 2007 « Resistance welding of thermoplastic composites skin/stringer joints ». Composites Part A: Applied Science and Manufacturing vol. 38 , nº 12. p. 2541-2552
- R. D. Farahani, D. Therriault, M. Dubé, S. Bodkhe, M. Mahdavi. 2018 « Additive manufacturing of multifunctional nanocomposites and composites ». In Comprehensive Composite Materials II vol. 6 : Nanocomposites and Multi. p. 380-407. Elsevier
- R. G. Martin, C. Johansson, J. R. Tavares, M. Dubé. 2023 « A degree of bonding evolution study of co-consolidated PEEK/PEI composite materials during welding ». Communication lors de la conférence : ICCM International Conferences on Composite Materials (Belfast, Ireland, July 30-Aug. 04, 2023)
- A. W. Smith, H. Pattery, J. P. Canart, I. Tabiai, M. Dubé. 2023 « Mechanical sieving of carbon-fibre/PEEK prepreg trim waste and its influence on compression moulded panel properties ». Communication lors de la conférence : ICCM International Conferences on Composite Materials (Belfast, Ireland, July 30-Aug. 04, 2023)
- Romain Martin, Christer Johansson, R. Jason Tavares, Martine Dubé. 2021 « The benefits of induction welding in joining of thermoplastic sandwich structures for lunar environment applications ». Communication lors de la conférence : Canadian Lunar Workshop (Saint-Hubert, QC, Canada, June 14-16, 2021)
- A. Jahromi, M. Dubé, Y. Serdyuk, M. S. Rouhi, M. Fagerström. 2019 « Simulation of induction welding process for glass fiber thermoplastic composites in aerospace applications ». Communication lors de la conférence : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2019)
- Mohamed Ameur Arfaoui, Patricia I. Dolez, Martine Dubé, Éric David. 2016 « Preparation of hydrophobic nonwoven using recycled jute fibre and a titanium dioxide/fatty acid coating ». Communication lors de la conférence : 2nd World Congress and Expo on Recycling (Berlin, Germany, July 25-27, 2016)
- Romain G. Martin, Martin Figueiredo, Christer Johansson, Jason R. Tavares, Martine Dubé. 2023 « Hysteresis losses magnetic susceptor heating rate characterization ». International SAMPE Technical Conference (Seattle, WA, USA, Apr. 17-20, 2023) Society for the Advancement of Material and Process Engineering
- J. Barroeta Robles, A. Guthrie, M. Dubé, P. Hubert, A. Yousefpour. 2022 « An approach to the repair of thermoplastic composites using resistance welding with a hybrid heating element ». International SAMPE Technical Conference (Charlotte, NC, USA, May 23-26, 2022) Society for the Advancement of Material and Process Engineering
- J. Lengaigne, J. Gunther, J. T. Teasdale, V. Toupin-Guay, M. Dubé, I. Tabiai. 2021 « Polypropylene microfiber extrusion by hot melt rotary jet spinning for non-woven membrane manufacturing ». Canadian Society for Mechanical Engineering International Congress (2021) (Charlottetown, PE, Canada, June 27-30, 2021) Canadian Society of Mechanical Engineers
- R. G. Martin, C. Johansson, J. R. Tavares, M. Dubé. 2021 « Heating rate prediction for induction welding magnetic susceptors ». 36th Technical Conference of the American Society for Composites 2021: Composites Ingenuity Taking on Challenges in Environment-Energy-Economy, ASC 2021 (En ligne, Sept. 20-22, 2021) DEStech Publications
- Romain G. Martin, Christer Johansson, Jason R. Tavares, Martine Dubé. 2021 « The benefits of joining thermoplastic sandwich structures using induction welding for lunar environment applications ». CASI ASTRO Conference (En ligne, Nov. 16-19, 2021) CASI
- C. Boanta, F. Lessard, L. Laberge-Lebel, M. Dubé, É. Robert. 2019 « Impact of cellulose filaments on interlaminar properties, flammability and thermal degradation behaviour of polymer matrix composites ». ICCM22 : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2020) Engineers Australia
- V. Rohart, M. Dubé, L. Laberge Lebel. 2019 « Improvement of the lap shear strength of resistance-welded thermoplastic composite joints using a silane sol-gel coating on the stainless-steel heating element ». ICCM22 : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2020) Engineers Australia
- D. Brassard, M. Dubé, J. Tavarez. 2018 « Conductive nanocomposites as heating elements for resistance welding ». 6th International Carbon Composites Conference (IC3) (Arcachon, France, June 04-06, 2018)
- N. Côté, M. Dubé, M-L Dano, M-J Potvin. 2018 « Repair of thermoplastic composite structures using induction welding ». CASI-ASTRO Conference (Québec, QC, Canada, May 15-17, 2018) Canadian Aeronautics and Space Institute
- Pierre Coulon, Jean-François Chatelain, Martine Dubé, Xavier Rimpault. 2018 « Effect of curing pressure on machinability of carbon fiber composite ». 8th CIRP Conference on High Performance Cutting (HPC 2018) (Budapest, Hungary, June 25-27, 2018) Elsevier
- Vincent Rohart, Martine Dubé, Louis Laberge Lebel. 2018 « Effects of temperature on the apparent lap shear strength of resistance-welded carbon fibre/thermoplastic composite joints ». SAMPE Long Beach 2018 Conference and Exhibition; (Long Beach, CA, USA, May 21-24, 2018) SAMPE
- Marc-Claudel Deluy, Anh Dung Ngo, Martine Dubé, Rajamohan Ganesan. 2017 « Influences of frequency and temperature on the fatigue behavior of plain-weave carbon/epoxy composite material with flaw subjected to partially-reversed cyclic loading ». 21st International Conference on Composite Materials (Xi'an, China, Aug. 20-25, 2017) International Committee on Composite Materials
- Patricia I. Dolez, Mohamed A. Arfaoui, Martine Dubé, Éric David. 2017 « Hydrophobic treatments for natural fibers based on metal oxide nanoparticles and fatty acids ». 3rd International Conference on Natural Fibers: Advanced Materials for a Greener World (ICNF) (Braga, Portugal, June 21-23, 2017) Elsevier B.V.
- R. D. Farahani, R. Seiller, M. Dubé. 2017 « Nanocomposite heating elements for induction welding of thermoplastic composites ». 10th Canadian-International Conference on Composites : Advanced Composites in Addressing Global Challenges of the 21st Century CANCOM2017 (Ottawa, ON, Canada, July 17-20, 2017)
- M. A. Arfaoui, P. I. Dolez, M. Dubé, É. David. 2016 « Hydrophobic treatment for jute fibers based on zinc oxide nanoparticles ». Advanced Materials - TechConnect Briefs 2016 (Washington, DC, USA, May 22-25, 2016) TechConnect
- David Brassard, M. Dubé. 2016 « Thermal characterization of conductive polymeric nanocomposites ». 5th International Carbon Composites Conference (IC3) (Arcachon, France, May 09-11, 2016)
- M. Cardonne, M. Khay, P. L. Vachon, M. Dubé, A. D. Ngô. 2015 « Effect of high temperature on the fatigue behaviour of a plain weave CFRP laminate under tension-tension loading ». 20th International Conference on Composite Materials (ICCM 2015) (Copenhagen, Denmark, July 19-24, 2015) International Committee on Composite Materials
- M. Cardonne, M. Khay, P. L. Vachon, M. Dubé, A. D. Ngô. 2015 « Effect of high temperature on the fatigue life of a plain weave CFRP laminate under tension-tension loading ». 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015) MSI Scandinavia
- R. D. Farahani, A. B. Kaganj, M. S. Hojjati, Van Hoa, M. Dubé. 2015 « Manufacturing of double-curvature CF/PPS continuous-fibre woven thermoplastic composite parts through stamp forming ». 62nd CASI Aeronautics Conference and AGM 3rd GARDN Conference (Montreal, QC, Canada, May 19-21, 2015)
- Rouhollah Dermanaki Farahani, Jason Tavarez, Martine Dubé. 2015 « Carbon nanotube-based conductive films for induction welding of thermoplastic polymers and composites ». 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015) MSI Scandinavia
- M. Khay, M. Cardonne, P-L. Vachon, M. Dubé, A. D. Ngô, R. Ganesan. 2015 « Experimental investigation of the tensile-tensile fatigue behaviour of carbon/epoxy plain weave laminates ». Design, manufacturing and applications of composites : proceedings of the Tenth Joint Canada-Japan Workshop on Composites, the University of British Columbia, Vancouver, Canada, August 2014 (Vancouver, BC, Canada, Aug. 19-21, 2014) DEStech Publications, Inc.
- Larry Lessard, Soroush Asgarinia, Chanvit Viriyasuthee, Steven Phillips, Martine Dubé, Joris Baets, Aart Van Vuure, Ignaas Verpoest. 2015 « Fatigue behaviour of woven flax/epoxy composites ». 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015) MSI Scandinavia
- A. Boulle, F. P. Gosselin, Martine Dubé. 2014 « Weight optimisation of an elliptical cross-section of a sandwich fuselage ». 16th European Conference on Composite Materials, ECCM 2014 (Sevilla, Spain, June 22-26, 2014) European Conference on Composite Materials, ECCM
- Patrice Gouin, Martine Dubé. 2014 « Induction welding of thermoplastic composites: effects of processing parameters on joint quality ». SAMPE Europe 35th International Conference SEICO 14 (Paris, France, Mar. 10-11, 2014)
- T. Jamin, Martine Dubé, L. Laberge Lebel. 2014 « Stamp forming of thermoplastic composites: effect of radius and thickness on part quality ». 16th European Conference on Composite Materials, ECCM 2014 (Sevilla, Spain, June 22-26, 2014) European Conference on Composite Materials, ECCM
- L.L. Lebel, J-P. Lachance, J-E. Brunel, T. Jamin, M. Dubé. 2014 « Modeling of out-of-plane stresses in C/PPS composite L-shape brackets ». Design, manufacturing and applications of composites : proceedings of the Tenth Joint Canada-Japan Workshop on Composites, the University of British Columbia, Vancouver, Canada, August 2014 (Vancouver, BC, Canada, Aug. 19-21, 2014) DEStech Publications, Inc.
- P. Coulon, M. Dubé, J-F. Chatelain. 2013 « Effect of vacuum pressure during curing of carbon fibre laminates on their machinability ». Proceedings of the 19th International Conference on Composite Materials-ICCM19 (Montreal, QC, Canada, July 29-Aug. 2, 2013)
- Jérémie Sauvé, Martine Dubé, Guillaume Corriveau, Frank Dervault. 2013 « Exact buckling solution of composite web/flange assembly ». Proceedings of the 19th International Conference on Composite Materials-ICCM19 (Montreal, QC, Canada, July 29-Aug. 2, 2013)
- Martine Dubé, Véronique Doquet, Andrei Constantinescu. 2010 « Multiple cracking of a borosilicate glass due to thermal shock ». Fracture of materials and structures from micro to macro scale : 18th European Conference on Fracture ; August 30 - September 03, 2010, Dresden, Germany ; book of abstracts ; [ECF-18] (Dresden, Germany, Aug. 30-Sept. 3, 2010)
- M. Dubé, V. Doquet. 2009 « Investigation of the thermo-mechanical behavior of a borosilicate glass used for nuclear waste vitrification ». 7th European Solid Mechanics Conference (ESMC7) (Lisbon, Portugal, Sept. 7-11, 2009)
- Martine Dubé, Pascal Hubert, Ali Yousefpour, Johanne Denault. 2007 « Fatigue performance of resistance-welded thermoplastic composite skin/stringer joints ». The use of composites in the 21st century to save energy and weight : SEICO 07, 28th SAMPE Europe international conference, April 02th - 04th, 2007, Hotel MERCURE Paris, Porte de Versailles ; proceedings (Paris, France, Apr. 2-4, 2007) Society for the Advancement of Material and Process Engineering
- Martine Dubé, Pascal Hubert, Ali Yousefpour, Jan Gallet, Darko Stavrov, Harald E. N. Bersee. 2007 « Heating element optimisation in resistance welding of semi-crystalline and amorphous thermoplastic composites ». 6th Canadian Conference on Composite Materials (CANCOM 2007) (Winnipeg, MB, Canada, Aug. 14-17, 2007)
- Martine Dubé, Pascal Hubert, Ali Yousefpour, Johanne Denault. 2006 « Resistance welding of thermoplastic composites skin/stringer specimens ». SAMPE '06 : creating new opportunities for the world economy (Long Beach, CA, USA, Apr. 30-May 4, 2006) Society for the Advancement of Material and Process Engineering
- Martine Dubé, Pascal Hubert, Ali Yousefpour, J. Denault. 2005 « Mechanical performance of resistance-welded thermoplastic composites skin/stringer specimens ». SAMPE Fall technical conference : [proceedings] (Seattle, WA, USA, Oct. 31-Nov. 3, 2005) Society for the Advancement of Material and Process Engineering