Anh Dung Ngô
Professeur
Department
Département de génie mécanique
Degrees
B.Sc.A. (Polytechnique Montréal), M.Sc. (Université Laval), Ph.D. (Université Concordia)
Office
A-2901
Email
Overview
Ngô, Anh Dung
Research axes
- Aeronautics and Aerospace
- Health Technologies
Areas of expertise
- Conception mécanique
- Matériaux composites
- Sécurité du travail
- Éléments finis
- Conception pour assemblage et fabrication
Course
Supervision
- En codirection avec :
Conception et fabrication d'un hélicoptère à propulsion humaine, par MICHAUD,ALEXIS
Été 2001 - En codirection avec :
Conception intégrée des arbres de transmission en composites, par Precup,Gheorghe
Hiver 2003
- En codirection avec : Hoa, Suong Van
Étude du comportement mécanique des matériaux composites polymériques à renforts tressés bi-axiaux, par Poulin,Martin
Automne 1999 - En codirection avec :
Étude du comportement en impact des composites de polypropylènes renforcés de biomatériaux à l'aide de la méthode des éléments finis, par Thuner,Fabien
Automne 2019 - En codirection avec :
Développement d’un plan de formation sur les pratiques de travail sécuritaires en électricité dans le secteur de la construction au Québec, par Ntoumaleu Tchamabe,Hugues
Automne 2020 - En codirection avec :
Étude de l'absorption de l'eau par les fibres de chanvre et de coco en fonction de la température, par Douik,Mohamed Sofiene
Été 2009 - En codirection avec :
Modélisation par éléments finis de la force et de l'énergie de coupe du composite de fibres naturelles - étude exploratoire, par Es-Sabri,Anass
Été 2021 - En codirection avec :
Estimation du module d'élasticité et la résistance en traction longitudinale des fibres de chanvre par la méthode des éléments finis, par Harfouche,Antoine
Hiver 2010 - En codirection avec :
Évaluation de la propagation des fissures dans un composite verre / époxy par la technique de vision, par El Wazziki,Mohamed
Automne 2011 - En codirection avec : Dubé, Martine
Conception, fabrication et validation d'une chambre environnementale à température et humidité contrôlées, par Trad,Mohamed-Salmane
Automne 2013 - En codirection avec :
Influence de l'humidité sur le conportement en fatigue de la fibre de chanvre et détermination de son angle microfibrillaire, par Emziane,Noureddine
Automne 2013 - En codirection avec :
L'infuence de l'humidité sur les propriétés physico-mécaniques des fibres de chanvre soumises aux chargements en traction statique et en fatigue, par Sefrioui Manar,Khalid
Été 2014 - En codirection avec :
Comportement en traction, en flexion et en fatigue du composite polypropylène renforcé par biomatériaux, par Ata,Christian
Automne 2019 - En codirection avec : Dubé, Martine
Étude expérimentale sur le comportement en flexion du composite époxy à renfort tissé en carbone comportant des défauts de fabrication, par Filleul,Pierre-Xavier
Été 2015 - En codirection avec :
La gestion des risques et de la sécurité dans le secteur minier, par Benachi,Nidhal
Automne 2022 - En codirection avec : Bouzid, Hakim A.
Étude de l'auto-desserrage en mode de déplacement contrôlé des joints boulonnés en PEHD et en acier, par Ramzi,Youssef
Été 2023 - En codirection avec : Bouzid, Hakim A.
Influence de la température sur le comportement de fluage en tension des polymères et composites, par Chemlal,Ouroud
Été 2024 - En codirection avec :
Études des exigences règlementaire et normatives sur l'utilisation sécuritaire des plateformes élévatrices mobiles dans le secteur de la construction, par Asguine,Chorouke
Automne 2024 - En codirection avec :
Analyse des risques associés au transport terrestre de l'essence par camion et train, par Ameur,Ihab Mohamed
Été 2024 - En codirection avec :
Modélisation de l'influence de la température sur le module d'élasticité en tension de biocomposites, par Touimi,Noureddine
Été 2024 - En codirection avec :
Conception d'un moule de moulage par compression d'une pièce de composite thermoplastique, par Gherab,Mohamed Sabri
Été 2018 - En codirection avec : Bouzid, Hakim A.
Modélisation et analyse par éléments finis des joints à brides boulonnées en polymères renforcés de fibres de verre (PRFV), par Boutahar,Youssef
Été 2023 - En codirection avec :
La sécurité dans le système de commande des robots en entreprise, par Gahou,Digbeu
Été 2024 - En codirection avec :
Conception d'un système thermique d'un moule de moulage par compression d'une pièce de composite thermoplastique, par Chahdi El Ouazani,Youssef
Été 2019 - En codirection avec :
Évaluation de la sécurité des chariots élévateurs dans les entrepôts automatisés, par Rouis,Badreddine
Été 2024 - En codirection avec : Bouzid, Hakim A.
Étude expérimentale sur l'auto-desserrage en mode de déplacement contrôlé de joint boulonné en stratifié de composite, par Jean,Fabrice
Été 2024 - En codirection avec : Bouzid, Hakim A.
Auto-desserrage de joints boulonnés en acier et en polyéthylène à haute densité (PEHD), par Missouma Ndzana,Gilles Arnaud
Été 2024 - En codirection avec :
Étude d'impact sur la santé et la sécurité liées à l'utilisation d'équipements de levage dans les chantiers de construction en milieu urbain, par Ghemari,Nawfel
Été 2024
- En codirection avec :
Évaluation de la faisabilité d'un rideau optique comme dispositf de protection sur une presse plieuse, par Venditti,Antonio
Hiver 2005
- En codirection avec :
Analyse de l'influence de la configuration sur le comportement en statique d'un profilé en T, fait de composite thermoplastique à haute résistance et fibres de carbone, par Hoang,Phuong Hoa
Été 2009 - En codirection avec :
Étude de l'influence de la température et de l'humidité sur les propriétés mécaniques en traction des fibres de chanvre et de coco, par Ho Thi,Thu Nga
Hiver 2008 - En codirection avec : Hu, Yan-Ru
Modeling and shape estimation of smart structures for active control/ Modélisation et estimation de forme des structures intelligentes pour le contrôle actif, par SEKOURI,EL MOSTAFA
Hiver 2004 - En codirection avec : Lamarche, Louis
Development of a flexible protective system for press-brakes using vision, par Tran,Nguyen Duy Phuong
Hiver 2009
- En codirection avec :
Analyse des contraintes des assemblages boulonnés en composites et polymères, par Bouzid,Sofiane
Automne 2022 - En codirection avec :
Optimisation d'un système hybride innovateur pour camion à ordures, par Arsenault,David
Automne 2008 - En codirection avec : Sean, Trek
Développement d'un nanocomposite constitué de polyéthylène linéaire à basse densité (LLDPE) et d'argile : paramètres de fabrication et propriétés mécaniques en traction, par Trudel,Carl
Automne 2011 - En codirection avec :
Geometry and Temperature Effects on the Tensile Modulus of Randomly Oriented Short Fibers Reinforced Biocomposites using Finite Elements Methods, par Naddaf,Farah
Automne 2023 - En codirection avec : Lortie, Pascal
Évaluation de la résistance statique d'un joint riveté par la méthode des éléments finis, par Collins,Mathieu
Été 2012 - En codirection avec : Dubé, Martine
Étude exploratoire sur le comportement en fatigue d'un composite à renfort tissé, par Cardonne,Martin
Automne 2014 - En codirection avec : Demarquette, Nicole R.
Comportement en fatigue et influence de la température sur les propriétés en traction du PLA, par Ménard,Claire
Été 2015 - En codirection avec :
L'estimation de la puissance de chauffage d'un procédé de moulage par compression du composite thermoplastique renforcé par des fibres de carbone, par Maalaoui,Salim
Hiver 2018 - En codirection avec :
Étude par les éléments finis du module d'Young selon les caractéristiques des fibres élémentaires de chanvre et de coco, par Leplanois,Thomas
Été 2017 - En codirection avec : Misra, Manjusri
Caractérisation et modélisation des propriétés mécaniques des biocomposites à fibres courtes aléatoires, par Dhaouadi,Tahar
Été 2018 - En codirection avec :
Analyse de la fiabilité humaine lors de l'opération d'une presse plieuse hydraulique, par Zouai,Fares
Été 2024 - En codirection avec : Bouzid, Hakim A.
Étude de l'auto-desserrage des assemblages boulonnées en composite, par Yaya Achimou,Ali
Été 2024 - En codirection avec :
Amélioration de la résistance d’impact d’un bord d’attaque d’un avion en alliage d’aluminium par des matériaux composites, par Khanfir,Ahmed
Été 2020
- En codirection avec :
Prévention et maîtrise des énergies dangereuses, par Benifla,Victor
Été 2020 - En codirection avec :
Amélioration continue, volet de santé, sécurité au travail, par Zerarda,Moussa
Hiver 2024 - En codirection avec :
Stagiaire ingénieur mécanique, par Riblier,Hugo
Été 2023
- En codirection avec :
Analyses de structures primaires par éléments finis à Bombardier Aviation, par Jack,David
Été 2020 - En codirection avec :
Réduction des non-conformités sur le Carter en composite du moteur LEAP, par Arnold,Clémentine
Hiver 2017 - En codirection avec :
Contribution à l'amélioration de la gestion de production avion CSeries, par Belaid,Zoubir
Hiver 2017 - En codirection avec :
Caractérisation du comportement en flambage d'un panneau composite sandwich impacté et influence de la courbure du panneau, par Sagaert,Louis
Été 2022 - En codirection avec :
Utilisation et optimisation d'outils de modélisation par éléments finis, par Barragué,Léo
Été 2024 - En codirection avec :
Stage ingénieur modélisation de la dissolution d'un durcisseur dans une résine epoxyde, par Siad,Nora
Automne 2021 - En codirection avec :
Analyse de structure - modification de structures de l'airbus A220, par Schiavoni Pinto,Felipe
Été 2021 - En codirection avec :
Rapport de stage, par Guévremont,David
Automne 2018
- En codirection avec :
Évaluation expérimentale de la résistance en fatigue d'un composite carbone/époxy sous chargement en tension-compression (Application aérospatiale), par Kiro,Bahati
Hiver 2011 - En codirection avec : Demarquette, Nicole R.
Fabrication par extrusion et caractérisation mécanique d'un composite thermoplastique fibre de bois/polyéthylène, par Deluy,Marc-Claudel
Hiver 2014 - En codirection avec :
Application du concept DFMA pour évaluer le coût d'outillage pour le procédé moulage par compression d'un composite thermoplastique renforcé aux fibres de carbone, par Arachiche,Ahmed
Été 2018 - En codirection avec :
Influence de la température sur le comportement mécanique de trois composites polypropylène renforcés de biochar et de différentes fibres, par Ourdane,Marouane
Été 2020
- En codirection avec :
System Safety Analysis of a Brake Press Using Fuzzy Methodology, par Venditti,Antonio
Automne 2020 - En codirection avec : David, Éric
Nanocomposites polyéthylène/argile destinés à des applications électriques : conception et relations structure-propriétés, par Zazoum,Bouchaib
Été 2014 - En codirection avec :
Development of Cost Estimating Tool for Thermoplastic Composite Aerospace Parts Manufactured by Compression Moulding Process, par El Wazziki,Mohamed
Été 2016 - En codirection avec : Ganesan, Rajamohan
Comportement en fatigue à la traction des composites tissés carbone/époxy sous l'effet de la température, l'humidité et de la fréquence de chargement: Essais et modélisation, par Khay,Mohamed
Été 2018 - En codirection avec : Ganesan, Rajamohan
Effets des conditions environnementales sur le comportement de la fatigue axiale en tension-compression d'un composite d'époxy à renfort tissé en carbone comportant un défaut artificiel, par Deluy,Marc-Claudel
Été 2021 - En codirection avec : Bouzid, Hakim A.
Analysis of Fiber Reinforced Plastic Bolted Flange Joints, par Khazraiyanvafadar,Ali
Été 2019 - En codirection avec : Songmene, Victor
Machinability of Polypropylene Biocomposites Reinforced with Natural Fibers and Biocarbon Particles, par Tran,Dinh Son
Hiver 2021
- En codirection avec :
Changement de colle de l'assemblage de la fenêtre et du tube, par Ata,Stéphanie
Été 2024 - En codirection avec :
Ingénieur HSE-Rédaction de différentes procédures SST dans le bâtiment, par Catoir,Agathe
Hiver 2023 - En codirection avec :
R&D et éco-innovation : optimisation des structures de lits médicalisés, par Guerrant,Maxime
Hiver 2024 - En codirection avec :
Rétrofit de véhicules 2 roues du point de vue mécanique, par Riblier,Hugo
Été 2023
- En codirection avec :
Modèle micro mécanique pour endommagement successif d'une fibre de chanvre, par Ouallou,Rachid
Hiver 2017 - En codirection avec :
Simulation sur le flambage des composites, par Maghous,Amal
Hiver 2022 - En codirection avec : Walch, Denis
Conception d'un programme de calcul des ruptures des stratifiés composites, par Poinsard,Benjamin
Été 2022 - En codirection avec :
Topological Optimization of an Intercostal at Bombardier Aviation, par Jack,David
Été 2020 - En codirection avec :
Modélisation par éléments finis de la force et de l'énergie de coupe du composite de fibres naturelles poypropylène/miscanthus, par Amamou,Amine
Été 2021 - En codirection avec :
Gestion des risques et sécurité des équipements dans un entrepôt pour la manutention des produits pharmaceutiques, par Nunez Pisconte,Oswaldo
Été 2022 - En codirection avec :
Analyse des risques de sécurité des robots de la pharmacie du Centre Hospitalier du l'Université de Montréal (CHUM), par Pierre,Jean Py
Automne 2023
Publications
- Sylvie Nadeau, Stéphane Hallé, Jean Arteau, B. Ateme-Nguema, A. Badri, Christian Belleau, Hakim Bouzid, M. Debia, B. Emami-Mehrgani, Frédéric Laville, François Morency, Anh Dung Ngô, Yvan Petit, Jérémie Voix. 2013 « Quand la vulgarisation scientifique reprend ses lettres de noblesse: le cas de l'EREST ». Affiche présentée lors de la conférence : Journée Découverte, École de technologie supérieure (Montréal, QC, Canada, 13 mars 2013)
- Tony Venditti, A. D. Ngô. 2012 « Quantitative analysis of the risks associated with an industrial machine: the case of a compression moulding press ». Affiche présentée lors de la conférence : 7e conférence internationale sur la sécurité des systèmes industriels automatisés = The 7th international conference on the safety of industrial automated systems (SIAS 2012) (Montreal, QC, Canada, Oct. 11-12, 2012)
- Anh Dung Ngô, Stéphane Hallé, Sylvie Nadeau, P. Déry, P. Doucet, R. Gilbert, L. Gratton, Jean Arteau, Hakim Bouzid, J. Brousseau, P. Dessureault, F. Gauthier, Frédéric Laville, P. Le Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas. 2007 « Le défi de l'intégration des connaissances en santé et en sécurité du travail - génie mécanique ». Travail et Santé vol. 23 , nº 4. p. 36-39
- Sofiane Bouzid, Abdel-Hakim Bouzid, Anh-Dung Ngo. 2023 « Stress analysis of ASME section X flanges using classical lamination theory ». Journal of Pressure Vessel Technology vol. 145 , nº 3
- Abdel-Hakim Bouzid, Ali Khazraiyan Vafadar, Anh Dung Ngô. 2021 « On the modeling of anisotropic fiber-reinforced polymer flange joints ». Journal of Pressure Vessel Technology vol. 143 , nº 6
- Dinh Son Tran, Victor Songmene, Anh Dung Ngo. 2021 « Regression and ANFIS-based models for predicting of surface roughness and thrust force during drilling of biocomposites ». Neural Computing and Applications vol. 33. p. 11721-11738
- Marc-Claudel Deluy, Mohamed Khay, Anh Dung Ngo, Martine Dubé, Rajamohan Ganesan. 2020 « Effects of environmental conditions on the axial tensioncompression fatigue behavior of carbon/epoxy plain-weave laminates containing flaws ». Journal of Composite Materials vol. 54 , nº 27. p. 4215-4230
- Dinh Son Tran, Victor Songmene, Anh Dung Ngo, Jules Kouam. 2020 « Effects of reinforcements and cutting parameters on machinability of polypropylene-based biocomposite reinforced with biocarbon particles and chopped miscanthus fibers ». International Journal of Advanced Manufacturing Technology vol. 110 , nº 11-12. p. 3423-3444
- Dinh Son Tran, Victor Songmene, Anh Dung Ngo, Jules Kouam, Arturo Rodriguez-Uribe, Manjusri Misra, Amar Kumar Mohanty. 2020 « Experimental investigation on machinability of polypropylene reinforced with miscanthus fibers and biochar ». Materials vol. 13 , nº 5
- Ali Khazraiyan Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngô. 2020 « Analytical modeling of FRP hubbed flanges ». International Journal of Pressure Vessels and Piping vol. 188
- Mohamed El Wazziki, Anh Dung Ngo. 2019 « Design for manufacture: Cost-estimating model for randomly oriented strand advanced composite aerospace parts ». Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications vol. 233 , nº 6. p. 1241-1251
- Ngoc Hai Tran, Cung Le, Anh Dung Ngo. 2019 « An investigation on speed control of a spindle cluster driven by hydraulic motor: application to metal cutting machines ». International Journal of Rotating Machinery vol. 2019
- M. Khay, A. D. Ngo, R. Ganesan. 2018 « Experimental investigation and phenomenological modeling of hygrothermal effect on tensile fatigue behavior of carbon/epoxy plain weave laminates ». Journal of Composite Materials vol. 52 , nº 27. p. 3803-3818
- Anh Dung Ngô, Thu Nga Ho, Khalid Sefrioui Manar. 2015 « Environmental effects on the static and fatigue behaviours of hemp fibre under tensile loading ». Applied Mechanics and Materials vol. 798. p. 410-418
- B. Zazoum, Éric David, Anh Dung Ngô. 2014 « Correlation between Structure and Dielectric Breakdown in LDPE/HDPE/Clay Nanocomposites ». ISRN Nanomaterials vol. 2014
- Bouchaib Zazoum, Eric David, Anh Dung Ngô. 2014 « Simulation and modeling of polyethylene/clay nanocomposite for dielectric application ». Transactions on Electrical and Electronic Materials vol. 15 , nº 4. p. 175-181
- Bouchaid Zazoum, Éric David, Anh Dung Ngô. 2014 « Structural and dielectric studies of LLDPE/O-MMT nanocomposites ». Transactions on Electrical and Electronic Materials vol. 15 , nº 5. p. 235-240
- Éric David, Michel Fréchette, Bouchaid Zazoum, Cyril Daran-Daneau, Anh Dung Ngô, Hugues Couderc. 2013 « Dielectric Properties of PE/Clay Nanocomposites ». Journal of Nanomaterials vol. 2013
- B. Zazoum, Éric David, Anh Dung Ngô. 2013 « LDPE/HDPE/clay nanocomposites: Effects of compatibilizer on the structure and dielectric response ». Journal of Nanotechnology vol. 2013
- El Mostafa Sekouri, Yan-Ru Hu, Anh Dung Ngô. 2004 « Modeling of a circular plate with piezoelectric actuators ». Mechatronics vol. 14 , nº 9. p. 1007-1020
- El Mostafa Sekouri, Anh Dung Ngo, Yan-Ru Hu. 2004 « Modeling of laminated composite structures with piezoelectric actuators ». Science and Engineering of Composite Materials vol. 11 , nº 2-3. p. 149-160
- Tony Venditti, Nguyen Duy Phuong Tran, Anh Dung Ngo. 2021 « System safety analysis of industrial processes using fuzzy methodology ». In Analysis of Socio-Economic Conditions: Insights from a Fuzzy Multi-dimensional Approach. p. 239-255. Routledge
- M. Misra, S. S. Ahankari, A. K. Mohanty, Anh Dung Ngô. 2011 « Creep and fatigue of natural fibre composites ». In Interface engineering of natural fibre composites for maximum performance. p. 289-340. Woodhead Publishing
- Hakim A. Bouzid, Sofiane Bouzid, Anh Dung Ngo. 2022 « On the tightness and strength of ASME section X FRP Flanges ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022)
- Anh Dung Ngo, Mohamed Khay, Tahar Dhaouadi. 2019 « Mechanical behavior modelling of composite materials ». Communication lors de la conférence : 10th International Conference on Mechanical and Aerospace Engineering (ICMAE 2019) (Brussels, Belgium, July 22-25, 2019)
- Anh Dung Ngo, Mohamed Khay, Marc-Claudel Deluy. 2018 « Experimental investigation of operational conditions effects on axial fatigue behaviour of carbonepoxy plain wave laminates containing atificial flaw ». Communication lors de la conférence : 2018 9th International Conference on Mechanical and Aerospace Engineering (ICMAE) (Budapest, Hungary, July 10-13, 2018)
- Anh Dung Ngô. 2016 « Simulation of process cycle time and tooling cost for carbon fibre reinforced thermoplastic composites compression moulded parts ». Communication lors de la conférence : 7th International Conference on Mechanical and Aerospace Engineering (ICPAM) (London, UK, July 18-20, 2016)
- Anh Dung Ngô. 2015 « Concurrent engineering for rapid product development workshop ». Communication lors de la conférence : Séminaire à l'Institut Polytechnique de Hô-Chi-Minh-Ville (Ho Chi Minh City, Vietnam, May 4-5, 2015)
- Anh Dung Ngô. 2015 « Concurrent engineering for rapid product development workshop ». Communication lors de la conférence : Séminaire à l'École Polytechnique de Danang (Danang, Vietnam, May 7-8, 2015)
- Anh Dung Ngô. 2015 « DFMA/Concurrent engineering for rapid product development ». Communication lors de la conférence : National conference on machines and mechanisms (Ho Chi Minh City, Vietnam, Oct. 31, 2015)
- Anh Dung Ngô. 2015 « Effects on humidity and temperature on static and fatigue properties of hemp fibre and biocomposite ». Communication lors de la conférence : 6th International Conference on Mechanical and Aerospace Engineering (ICMAE) (Roma, Italy, July 16-18, 2015)
- P.H. Hoang, Anh Dung Ngô. 2006 « Behavior of thermoplastic composite carbon/PEKK T-Joints under static tension web pull-Off loading ». Communication lors de la conférence : Symposium on Advanced Composites and the 2nd Sino-Canadian Workshop on Composite Technology and Trade (Jiangsu, China, Oct. 2006)
- G. Precup, Anh Dung Ngô. 2004 « Design of braided composite drive shafts ». Communication lors de la conférence : Technical Symposium on Composite Materials (Nanjing, China, Aug. 30, 2004)
- Anh Dung Ngô, S. Hoa. 2002 « Mechanical behavior of flat composites ». Communication lors de la conférence : The 3rd Joint Canada-Japan Workshop (Kyoto, Japan, Sept. 24-26, 2002)
- M. Poulin, Anh Dung Ngô, S.V. Hoa. 2000 « Mechanical behavior of flat braided composites ». Communication lors de la conférence : The 3rd Joint Canada-Japan Workshop on Composites (Kyoto, Japan, Mar., 2000)
- Yves Beauchamp, Anh Dung Ngô. 1997 « La sécurité dans l'utilisation des tracteurs ». Communication lors de la conférence : Conférence Canadienne sur la Santé et la Sécurité à la Ferme (Québec, QC, Canada, oct. 1997)
- Van Ngan Lê, Anh Dung Ngô, N.S. Hô, N. Huynh. 1996 « 3-D knee orthosis: part 2 - Experimental and finite element analysis of coupled knee-orthosis stiffness ». Communication lors de la conférence : 1996 Annual Scientific Meeting of the Canadian Academy of Sport Medecine (Montreal, QC, Canada, Feb. 14-17, 1996)
- Van Ngan Lê, Anh Dung Ngô, T. Allardin, J. Mailhot. 1994 « Integrated and safe design of telescopic cylinders without follower guides ». Communication lors de la conférence : Canadian Standards Association, Hydraulic Elevators Meeting (Montreal, QC, Canada, May 26, 1994)
- Yves Beauchamp, Anh Dung Ngô, G. Yengue, C. Trudel. 1993 « Les problèmes de sécurité dans l'utilisation des presses à injecter les plastiques ». Communication lors de la conférence : 15e congrès de l'AHIQ (Montréal, QC, Canada, mai 1993)
- Phieu Le-Huy, Anh Dung Ngô, D. Deschamps, J. Lapierre. 1993 « Gestion automatisée des chantiers de construction ». Communication lors de la conférence : 61e Congrès de l'ACFAS (Rimouski, QC, Canada, 17-21 mai 1993)
- Sofiane Bouzid, Abdel-Hakim Bouzid, Anh Dung Ngô. 2022 « A study of the strength of ASME section X FRP flanges ». ASME Pressure Vessels & Piping Conference (Las Vegas, NV, USA, July 17-22, 2022) American Society of Mechanical Engineers (ASME)
- Sofiane Bouzid, Abdel-Hakim Bouzid, Anh Dung Ngô. 2022 « Stress analysis of ASME section X flanges using classical lamination theory ». 14th International Pipeline Conference (Calgary, AB, Canada, Sept. 26-30, 2022) American Society of Mechanical Engineers (ASME)
- Ali Khazraiyan Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngo. 2020 « An analytical anisotropic model to analyze fiber reinforced polymer bolted flange joints ». ASME 2020 Pressure Vessels and Piping Conference (PVP) (En ligne, Aug. 03, 2020) American Society of Mechanical Engineers (ASME)
- Tony Venditti, Tran Nguyen Duy Phuong, Anh Dung Ngô. 2020 « Safety analysis of an industrial system using markov reliability diagram with repair ». Advances in Safety Management and Human Performance : Proceedings of the AHFE 2020 Virtual Conferences on Safety Management and Human Factors, and Human Error, Reliability, Resilience, and Performance (En ligne, July 16-20, 2020) Springer International Publishing
- A. D. Ngo, T. Dhaouadi, J. B. Ragu, A. Rodriguez-Uribe, M. Misra, A. K. Mohanty. 2019 « Characterization and thermal effect on mechanical properties of biomaterial-reinforced-polypropylene ». ICCM22 : 22nd International Conference on Composite Materials (Melbourne, Australia, Aug. 11-16, 2019) Engineers Australia
- Tony Venditti, Nguyen Duy Phuong Tran, Anh Dung Ngo. 2019 « Expert elicitation methodology in the risk analysis of an industrial machine ». International Conference on Safety Management and Human Factors (AHFE) (Orlando, FL, USA, July 21-15, 2018) Springer Verlag
- Tahar Dhaouadi, Anh Dung Ngo, Arturo Rodriguez-Uribe, Manjusri Misra, Amar K. Mohanty. 2018 « Mechanical characterisation and modelling of sustainable biomaterials randomly reinforced toughened polypropylene ». 15th International Symposium on Bioplastics, Biocomposites and Biorefining (ISBBB 2018) (Guelph, ON, Canada, July 24-27, 2018)
- Tony Veditti, Nguyen Duy Phuong Tran, Anh Dung Ngo. 2018 « Dynamic fuzzy safety analysis of an industrial system ». AHFE 2017 International Conference on Safety Management and Human Factors, 2017, July 17, 2017 - July 21, 2017 (Los Angeles, CA, USA, July 17-21, 2017) Springer Verlag
- Tony Venditti, Nguyen Duy Phuong Tran, Anh Dung Ngo. 2018 « System safety analysis of an industrial process using fuzzy methodology ». 4th International Conference on Fuzzy Systems and Data Mining (FSDM 2018) (Bangkok, Thailand, Nov. 15-16, 2018) IOS Press
- Marc-Claudel Deluy, Anh Dung Ngo, Martine Dubé, Rajamohan Ganesan. 2017 « Influences of frequency and temperature on the fatigue behavior of plain-weave carbon/epoxy composite material with flaw subjected to partially-reversed cyclic loading ». 21st International Conference on Composite Materials (Xi'an, China, Aug. 20-25, 2017) International Committee on Composite Materials
- N. H. Tran, C. Le, A. D. Ngo. 2017 « Experimental investigation of speed control of hydraulic motor using proportional valve ». International Conference on System Science and Engineering (ICSSE) (Ho Chi Minh City, Vietnam, July 21-23, 2017) IEEE
- Ali K. Vafadar, Abdel-Hakim Bouzid, Anh Dung Ngô. 2017 « Effect of material anisotropy on the structural integrity of composite bolted flanged joints ». ASME 2017 Pressure Vessels and Piping Conference (PVP 2017) (Waikoloa, HI, USA, July 16-20, 2017) American Society of Mechanical Engineers (ASME)
- Mohamed Khay, Anh Dung Ngo, Rajamohan Ganesan. 2016 « Frequency effect on fatigue tensile behaviour of carbon/epoxy plain weave laminates under different hygrothermal conditions ». Design, Manufacturing and Applications of Composites : Proceedings of the Eleventh Joint Canada-Japan Workshop on Composites and the First Joint Canada-Japan-Vietnam Workshop on Composites DEStech Publications
- Hai Trân Ngoc, Cung Lê, Anh Dung Ngô. 2016 « Nghiên cứu thực nghiệm về ổn định tốc độ của trục chính máy tiện khi truyền động bằng động cơ thủy lực ». 8th Vietnam Conference on Mecatronique (VCM) (Can Tho City, Vietnam, Nov. 25-26, 2016)
- M. Cardonne, M. Khay, P. L. Vachon, M. Dubé, A. D. Ngô. 2015 « Effect of high temperature on the fatigue behaviour of a plain weave CFRP laminate under tension-tension loading ». 20th International Conference on Composite Materials (ICCM 2015) (Copenhagen, Denmark, July 19-24, 2015) International Committee on Composite Materials
- M. Cardonne, M. Khay, P. L. Vachon, M. Dubé, A. D. Ngô. 2015 « Effect of high temperature on the fatigue life of a plain weave CFRP laminate under tension-tension loading ». 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015) MSI Scandinavia
- M. El Wazziki, A. D. Ngo. 2015 « Modelling of compression moulding process cycle time for carbon fibre reinforced thermoplastic flat panels ». Design, manufacturing and applications of composites : proceedings of the Tenth Joint Canada-Japan Workshop on Composites, the University of British Columbia, Vancouver, Canada, August 2014 (Vancouver, BC, Canada, Aug. 19-21, 2014) DEStech Publications inc.
- M. El Wazziki, A. D. Ngo, D. Leblanc. 2015 « Modelling of compression moulding process cycle time and application of dfma concept to evaluate the tooling costs for carbon fiber reinforced thermoplastic composites t-shape parts ». 20th International Conference on Composite Materials (ICCM20) (Copenhagen, Denmark, July 19-24, 2015) MSI Scandinavia
- Mohamed El Wazziki, Anh Dung Ngo. 2015 « Modelling of compression moulding process cycle time for carbon fibre reinforced thermoplastic concave parts ». Canadian - International Conference on Composites (Cancom 2015) (Edmonton, AB, Canada, Aug. 18-20, 2015)
- M. Khay, M. Cardonne, P-L. Vachon, M. Dubé, A. D. Ngô, R. Ganesan. 2015 « Experimental investigation of the tensile-tensile fatigue behaviour of carbon/epoxy plain weave laminates ». Design, manufacturing and applications of composites : proceedings of the Tenth Joint Canada-Japan Workshop on Composites, the University of British Columbia, Vancouver, Canada, August 2014 (Vancouver, BC, Canada, Aug. 19-21, 2014) DEStech Publications, Inc.
- A. D. Ngo, M. Khay, M. Cardonne, V. Nagarajan, M. Misra, A. K. Mohanty. 2013 « Flexural fatigue behaviour of new engineered biocomposites from poly (3 -hydroxybutyrate-co-hydroxyvalerate) (PHBV)/POLY (butylene adipate-co-terephthalate) (PBAT) blends and switchgrass ». 19th International Conference on Composite Materials (ICCM 2013) (Montreal, QC, Canada, July 28 - Aug. 02, 2013) International Committee on Composite Materials
- Éric David, C. Daran-Daneau, M. F. Fréchette, B. Zazoum, Anh Dung Ngô, S. Savoie. 2012 « Dielectric response of LLDPE/Clay nanocomposite melt compounded from a masterbatch ». 2012 IEEE International Symposium on Electrical Insulation (ISEI) (San Juan, PR, USA, June 10-13, 2012) IEEE
- Tony Venditti, Nguyen Duy Phuong Tran, Anh Dung Ngô. 2012 « System safety analysis of an industrial process using fuzzy methodology ». Actes de la 7e conférence internationale sur la sécurité des systèmes industriels automatisés = Proceedings of the 7th International Conference on the Safety of Industrial Automated Systems (SIAS 2012) (Montreal, QC, Canada, Oct. 11-12, 2012) IRSST
- B. Zazoum, Anh Dung Ngô, Éric David, C. Daneau, M. Frechette. 2011 « Morphology characteristics, thermal properties and dielectric breakdown of LLDPE/clay nanocomposites ». 26th Annual Technical Conference of the American Society for Composites and the 2nd Joint US-Canada Conference on Composites (Montreal, Canada, Sept. 26-28, 2011) DEStech Publications Inc.
- C. Trudel, Anh Dung Ngô, T. S. Sean. 2010 « Low linear density polyethylene (LLDPE)/nanoclay composites : process parameters and mechanical properties ». Proceedings of the Eighth Joint Canada-Japan Workshop on Composites : Design, Manufacturing and Applications of Composites (Montréal ; Boucherville, Québec, Canada, July 26-28, 2010) DEStech Publications, inc.
- T. N. Ho, Anh Dung Ngô. 2009 « Hygrothermal effects on the tensile mechanical properties of hemp and coir fibers ». Proceedings of the American Society for Composites 2009-Twenty-Fourth Technical Conference : September 15-17, 2009, [Wilmington, Delaware] (Wilmington, DE, USA, Sept. 15-17, 2009) DEStech Publications, inc.
- Nguyen Duy Phuong Tran, Anh Dung Ngô, Louis Lamarche, Phieu Le-Huy. 2009 « Development of a flexible protective system for press-brakes using vision, part III : multi-point inspection ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
- Nguyen Duy Phuong Tran, Anh Dung Ngô, Louis Lamarche, Phieu Le-Huy. 2009 « Development of a flexible protective system for press-brakes using vision, part IV : investigation on the error of the kinematic parameters ». Arbeit, Beschäftigungsfähigkeit und Produktivität im 21. Jahrhundert : Bericht zum 55. Kongress der Gesellschaft für Arbeitswissenschaft vom 4. - 6. März 2009 [an der Technischen Universität Dortmund] (Dortmund, Germany, Mar. 4-6, 2009) GFA-Press
- K. Zaras, Sylvie Nadeau, Anh Dung Ngô. 2009 « Vers l'audit de la performance des sous-traitants d'entreprises manufacturières : comment sélectionner des fournisseurs diligents en santé et en sécurité du travail ». 2nd International Conference on Industrial Risk Engineering = 2e Congrès International sur l'Ingénierie des Risques Industriels (CIRI) (Reims, France, 13-15 mai 2009)
- Phuong Hoa Hoang, Anh Dung Ngô. 2008 « Behavior of laminated fiber composite T-joint under web pull-off static tensile loading using finite-element analysis ». 7th Joint Canada-Japan Workshop on Composites (Fujisawa, Kanagawa, Japan, July 28-31, 2008) DEStech Publications Inc.
- Anh Dung Ngô, T.N. Ho. 2008 « Composites effects of humidity and temperature on the tensile properties of hemp and coir fibers reinforcements ». 1st International Conference on Environment and Natural Resources (Ho Chi Minh, Viêt Nam, Mar. 17-18, 2008)
- Sylvie Nadeau, Stéphane Hallé, S. Déry, P. Doucet, R. Gilbert, L. Gratton, Anh Dung Ngô, Jean Arteau, Hakim Bouzid, J. Brousseau, J. Dessureault, F. Gauthier, Frédéric Laville, P. Le-Huy, Françoise Marchand, Yvan Petit, D. Rodier, Marc Thomas. 2007 « Vers l'intégration de connaissances en santé et sécurité du travail en formation universitaire (génie mécanique) - une collaboration unique ». 24e Congrès de l’Association Internationale de Pédagogie Universitaire (AIPU) (Montréal, QC, Canada, 16-18 mai 2007) Association Internationale de Pédagogie Universitaire (AIPU)
- N.D.P. Tran, Anh Dung Ngô, Louis Lamarche, Phieu Le-Huy. 2007 « Development of a flexible protective system for press-brake using vision part II : investigation on the practicability ». Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007) École de technologie supérieure
- A. Venditti, Anh Dung Ngô. 2007 « Feasibility study of a light curtain as a protective device on a press-brake ». Premier congrès international sur l'ingénierie des risques industriels CIRI 2007 : Montréal, 17-19 décembre 2007 : actes : proceedings (Montreal, QC, Canada, Dec. 17-19, 2007) École de technologie supérieure
- T.N. Ho, Anh Dung Ngô. 2006 « Prediction of environmental effects on the mechanical behavior of hemp and coir fibers using artificial neural Networks ». Design, manufacturing and applications of composites : proceedings of the Sixth Joint Canada-Japan Workshop on Composites, Toronto, Canada, August 2006 (Toronto, ON, Canada, Aug. 24-26, 2006) Destech Publications, INC
- Anh Dung Ngô, N.D.P. Tran, Louis Lamarche, Phieu Le-Huy. 2006 « Développement d’un système de protection pour les presses-plieuses basé sur la vision. Partie I: algorithme ». Acte du Colloque de l’ACFAS sur la Recherche en SST : Anciens Risques et Enjeux Actuels, Symposium – Sécurité des Équipements et Procédés Industriels (Montréal, QC, Canada, 17-19 mai 2006)
- Nguyen Duy Phuong Tran, Anh Dung Ngô, Louis Lamarche. 2006 « Development of a flexible protective system for press-brakes using vision part 1: algorithm ». IEEE International Symposium on Industrial Electronics (ISIE) (Montreal, Canada, Jul. 9-13, 2006) Institute of Electrical and Electronics Engineers
- Jean Arteau, Sylvie Nadeau, Anh Dung Ngô, Pierre Rivet. 2005 « La santé et la sécurité du travail en milieu universitaire: des choix proactifs ». Colloque la santé et la sécurité du travail au Québec : de la recherche à la pratique : 11 mai 2005 à l'Université du Québec à Chicoutimi dans le cadre du 73e congrès de l'Acfas (Chicoutimi, QC, Canada, 10-15 mai 2005) Réseau de recherche en santé et en sécurité du travail du Québec
- T.N. Ho, Anh Dung Ngô. 2005 « Influence of temperature and humidity on the tensile strength and stiffness of hemp and coir fibers ». 5th Canadian International Composites Conference (Vancouver, BC, Canada, Aug. 16-19, 2005) CACSMA
- T.N. Ho, Anh Dung Ngô. 2005 « Sorption of water in hemp and coir fibers ». 8th International Conference on Woodfiber-Plastic Composites (and other natural fibers) (Madison, WI, USA, May 23-25, 2005)
- E.M. Sekouri, Y.R. Hu, Anh Dung Ngô. 2005 « Strain-based shape estimation for annular plates ». ASME International Mechanical Engineering Congress and Exposition (IMECE) (Orlando, FL, USA, Nov. 5-11, 2005) American Society of Mechanical Engineers
- Van Ngan Lê, Anh Dung Ngô, Françoise Marchand, Henri Champliaud, F. Packwood. 2004 « Calculating tension force in belts retaining steel rolls by finite elements ». 7th National Conference on Mechanics of Deformable Bodies (Do-Son, Vietnam, Aug. 27-28, 2004)
- G. Precup, Anh Dung Ngô. 2004 « A numerical study on the mechanical behavior of flat braided composites ». Design, Manufacturing and Applications of Composites, Fifth Joint Canada-Japan Workshop on Composites (Yonewaza, Japan, Sept. 2004)
- El Mostafa Sekouri, Yan-Ru Hu, Anh Dung Ngo. 2002 « Modeling of annular plate with piezoelectric actuators for active vibration control ». ASME International Mechanical Engineering Congress and Exposition (IMECE) (New Orleans, LA, USA, Nov. 17-22, 2002) American Society of Mechanical Engineers
- El Mostafa Sekouri, Anh Dung Ngo, Yan-Ru Hu. 2002 « Modeling of laminated composite structures with piezoelectric actuators ». 4th Joint Canada/Japan Workshop on Composites (Vancouver, Canada, Sept. 19-21, 2002) CRC Press-Taylor & Francis Group
- M. Poulin, A. D. Ngô, S. V. Hoa. 2000 « Mechanical behavior of flat braided composites, design and manufacturing of composite ». Design and manufacturing of composites : proceedings of the Third Joint Canada-Japan Workshop on Composites, Kyoto Institute of Technology, Kyoto, Japan, March 2000 (Kyoto, Japan, Mar., 2000) Technomic Publishing Co.
- Y. Beauchamp, A. D. Ngô. 1998 « A survey of farmer's perception of safety and fatal accidents involving agricultural tractor in Québec ». Manufacturing agility and hybrid automation-II: proceedings of the Six International Conference on Human Aspects of Advanced Manufacturing: Agility & Hybrid Automation, The Hong Kong University of Science and Technology, July 5-8, 1998, Hong Kong (Hong Kong, China, July 5-8, 1998) IEA Press
- A. D. Ngô, Y. Beauchamp, P. LeHuy. 1998 « A survey on the safety of presses-brakes in the manufacturing industries of transport equipment and machinery ». Manufacturing agility and hybrid automation-II: proceedings of the Six International Conference on Human Aspects of Advanced Manufacturing: Agility & Hybrid Automation, The Hong Kong University of Science and Technology, July 5-8, 1998, Hong Kong (Hong Kong, China, July 5-8, 1998) IEA Press
- Anh Dung Ngo, T. O. Abdesslam. 1998 « Prediction of the fatigue behavior of Graphite-Epoxy laminates using artificial neural network ». Design and manufacturing of composites : proceedings of the Second Joint Canada-Japan Workshop on Composites, Concordia University, Montreal, Quebec, Canada, August 1998 (Montreal, Canada, Aug. 19-21, 1998) Technomic Pub. Co. inc.
- Ahn Dung Ngô, Suong Van Hoa, Lue Martin. 1996 « Mode III interlaminar fracture toughness of unidirectional graphite/epoxy composite ». Design and manufacturing of composites: proceedings of the Joint Canada-Japan Workshop on Composites, Kyoto, Japan, August 1996 (Kyoto, Japan, Aug. 21-23, 1996) Technomic Publishing Co.
- Anh Dung Ngô, P. Malinowski, S. Kajl, M. Balazinski. 1996 « Fuzzy logic approach to manual material handling tasks ». Manufacturing agility and hybrid automation - I: proceedings of the 5th International Conference on Human Aspects of Advanced Manufacturing: Agility and Hybrid Automation, Maui, Hawaii, USA, August 1996 (Maui, Hawaii, USA,, Aug., 1996) IEA Press
- Yves Beauchamp, Anh Dung Ngô, G. Yengue, C. Trudel. 1993 « Les problèmes de sécurité associés à l'utilisation des presses à injecter les plastiques ». 15e congrès de l'AHIQ (Montréal, QC, Canada, mai 1993)
- Anh-Dung Ngo, Suong V. Hoa, Thiagas S. Snakar. 1985 « Axial fatigue of SMC-R65 sheet molding compound in liquid environments ». High modulus fiber composites in ground transportation and high volume applications (Pittsburgh, PA, USA, Nov. 07, 1983) ASTM International
- Anh Dung Ngô, Johanne Denault, Asami Nakai, Tohru Morii, Suong V. Hoa, Hyroyuki Hamada. 2010 « Design, Manufacturing and Applications of Composites : Proceedings of the Eighth Joint Canada-Japan Workshop on Composites ». Lancaster, Pa., USA : DEStech Publications inc.. 466 p.
- Anh Dung Ngô. 1989 « Effect of liquid absorption on the fatigue behavior of random fiber sheet molding compounds ». 309 p.Thèse de doctorat. Concordia.
- Yves Beauchamp, Anh Dung Ngô. 1998 « Sécurité dans l'utilisation des tracteurs agricoles au Québec : caractéristiques et conditions d'utilisation ». IRSST. 45 p.
- Anh Dung Ngô, Yves Beauchamp, Phieu Le-Huy. 1998 « La sécurité dans l'utilisation de machines dangereuses : les presses plieuses dans le secteur de la fabrication d'équipement de transport et de machines ». IRSST. 106 p.