April 16, 2024
Lucas Hof
Professeur
Department
Département de génie mécanique
Degrees
B.Sc., M.Sc. (Delft University of Technology), Ph.D. (Concordia University)
Office
A-1916
Email
- 01 Presentation
- 02 Courses and supervision
- 03 Publications
- 04 Research Projects for Students
- 05 News
Overview
Hof, Lucas
Research units
- Visit the website :NUMERIX – Organizational Engineering Research Laboratory for the Digital Enterprise
- Visit the website :DYNAMO – Research Laboratory in Machine, Process and Structural Dynamics
- Visit the website :Centre interdisciplinaire de recherche en opérationnalisation du développement durable (CIRODD)
Areas of expertise
- Fabrication avancée
- Micro-usinage (matériaux difficiles à usiner)
- Fabrication électrochimique
- Mécatronique
Supervision
- En codirection avec : Hof, Lucas Abia
Vers un processus circulaire pour la fabrication additive des chaussures à talons hauts – évaluation des procédés de fabrication additifs, sélection des matériaux et caractérisation mécanique, par Ghimouz,Chahine
Hiver 2021 - En codirection avec : Bouzid, Hakim A.
Quantification de la corrosion dans les assemblages à brides boulonnées munis de joints d'étanchéité, par Dos Santos Barreto,Rafael Renan
Hiver 2020 - En codirection avec : Hof, Lucas Abia
Évaluation du temps d’assemblage d’une entreprise en se basant sur l’historique de production, par Pamen Heubo,Gaëtan Joël
Hiver 2020 - En codirection avec : Hof, Lucas Abia
Antireflective Nanopatterned Surface Treatment for Glass, par Feith,Lucas
Été 2020 - En codirection avec : Hof, Lucas Abia
Développement de produit pour animaux robuste et innovateur visant à améliorer le comportement de l'animal, par Singleton,Michael
Été 2022 - En codirection avec : Hof, Lucas Abia
Modélisation de la couverture de la peinture en poudre pour des applications industrielles automatisées, par Rayeh,Lilia
Été 2023 - En codirection avec : Hof, Lucas Abia
Optimisation du système de production d'une entreprise manufacturière dans le contexte de l'industrie 4.0, par Bru,Valentin
Hiver 2023 - En codirection avec : Nadeau, Sylvie
Mise en service de lunettes intelligentes dans l'assemblage aéronautique, par Gazani Ondze,Euloge David
Été 2023 - En codirection avec : Hof, Lucas Abia
Détection de la stationnarité temporelle des données opérationnelles, par Brax,Matthieu
Automne 2023 - En codirection avec : Kenné, Jean-Pierre
Intégration des stratégies de cadenassage à la gestion de production dans le secteur industriel, par Mdafai,Amine
Été 2021 - En codirection avec : Hof, Lucas Abia
Développement et optimisation d'outils de collecte, de tri et de recyclage des déchets domestiques en milieu urbain dans le contexte d'économie circulaire, par Attia,Marwen
Été 2021 - En codirection avec : Hof, Lucas Abia
Analyse des technologies émergentes de désassemblage et récupération des batteries lithium-ion en fin de vie : évaluation des performances, des risques pour la santé et des pratiques de sécurité, par Chebbah,Younes
Hiver 2024 - En codirection avec : Hof, Lucas Abia
Conception d'un système manufacturier de panneaux solaires : un assemblage hybride (manuel – automatique – 5.0), par Bouche Noumbi,Emmanuel Jonathan
Hiver 2023 - En codirection avec : Bonev, Ilian
Conception d'un système robotisé de triage de matériaux recyclables, par Kireche,Mouad
Hiver 2024 - En codirection avec : Tabiai, Ilyass
Détermination et quantification des paramètres affectant l'estimation de coût de projet pour les pièces usinées de haute précision, par Jean-Baptiste,Deborah
Automne 2021 - En codirection avec : Hof, Lucas Abia
Mise en service d'un gant intelligent, par Moutaki,Anis
Hiver 2021 - En codirection avec : Tahan, Antoine
Modèle d'implémentation de l'industrie 4.0 dans la maintenance des matériels roulants, par Ârous,Radouane
Hiver 2022 - En codirection avec : Hof, Lucas Abia
L'amélioration de la communication interne des entreprises pour la gestion des risques dans le cadre de l'industrie 5.0, par Zidane,Mohamed Othmane
Été 2023 - En codirection avec : Hof, Lucas Abia
Proposition d'un modèle d'ordonnancement de la production adapté aux systèmes de fabrication sur mesure, par Garcia,Edgar De Jesus
Automne 2023 - En codirection avec : Hof, Lucas Abia
Amélioration des performances et mise en place d'un système intelligent des procédés manufacturiers dans un contexte de développement durable, par Cedric Wato,Cedric Wato
Automne 2022
- En codirection avec : Hof, Lucas Abia
Optimisation des chaînes d'approvisionnement en boucle fermée dans un contexte d'économie circulaire à l'ère de l'industrie 4.0, par Delpla,Victor
Automne 2020 - En codirection avec : Hof, Lucas Abia
Amélioration des performances des systèmes de fabrication circulaire dans le paradigme de l'industrie 4.0 en contexte de chaine d’approvisionnement en boucle fermée, par Boudane,Massiva
Hiver 2022 - En codirection avec : Kenné, Jean-Pierre
Optimisation des performances des systèmes manufacturiers en contexte de chaîne d'approvisionnement en boucle fermée, par Megoze Pongha,Patrick
Hiver 2022 - En codirection avec : Hof, Lucas Abia
Toward a Smart System for Pets, par Hoang,Van Tien
Été 2021 - En codirection avec : Hof, Lucas Abia
Modularity Integration in the Gas Turbine Sector for Performance and Cost Optimization, par Chavanel Precloux,Lucas
Automne 2023 - En codirection avec : Hof, Lucas Abia
Développement d'une machine et du contrôle d'un procédé d'usinage électrochimique pour matériaux difficiles à usiner, par Villeneuve,Guillaume
Automne 2022 - En codirection avec : Hof, Lucas Abia
Évolution de l'industrie de la chaussure : vers des pratiques durables grâce à la fabrication avancée, par Ghimouz,Chahine
Automne 2023 - En codirection avec : Tahan, Antoine
Modularité de produit et complexité manufacturière, par Mekazi Mokue,Pascale Alison
Automne 2024 - En codirection avec : Hof, Lucas Abia
Towards High-Volume Anti-Reflective Glass Nanoimprinting, par Cole,Douglas
Hiver 2023 - En codirection avec : Hof, Lucas Abia
Dissimulation des lignes de scribes des modules photovoltaïques, par Halgand,Antoine
Été 2024 - En codirection avec : Hof, Lucas Abia
Une approche adaptative et intelligente pour permettre aux entreprises de mettre en œuvre conjointement des processus LOTO et des stratégies de production et de maintenance dans le contexte de l'industrie 4.0, par Abida,Rayene
Été 2024 - En codirection avec : Hof, Lucas Abia
Développement d'un système de fabrication circulaire, intelligente et durable, par Lachguer,Lamyae
Été 2024 - En codirection avec : Henderson, Andrew
Analyse de cycle de vie de différents types de verre, par Liogier,Louis
Automne 2024 - En codirection avec : Boukherroub, Tasseda
Economic Feasibility Analysis of a Medical Mask Closed-Loop Supply Chain: a Case Study in the Montreal Region, par Villalobos Cortes,Erika Guadalupe
Hiver 2024 - En codirection avec : Tahan, Antoine
Prédiction de l’évolution du taux de rendement global des machines de production par intelligence artificielle, par Barthel,Marion
Été 2024 - En codirection avec : Hof, Lucas Abia
Remanufacturation de verre technique en composants à forte valeur ajoutée, par Leclair,Jean-Philippe
Été 2024 - En codirection avec : Hof, Lucas Abia
On the Investigation of Coating Characteristics Within the Experimental Domain Imposed by Inner-Diameter HVOF Process, par Prudnikov,Cassandra
Automne 2023 - En codirection avec : Hof, Lucas Abia
Employing Metamaterials in Additive Manufacturing for Supplier Streamlining through Process Simulation and Validation, par Ben Abdallah,Mohamed Amine
Automne 2024 - En codirection avec : Bocher, Philippe
Effet des conditions d'ablation laser sur l'adhérence du dépôt de AL6061 projeté à froid sur des substrats d'AL6061 extrudé, par Thibault,Alexis
Automne 2023 - En codirection avec : Chaabane, Amin
Développement d'un modèle pour la prise de décision basée sur les modèles CAO 3D, par Douik,Helmi
Été 2024 - En codirection avec : Lalonde, Sébastien
Investigation of Gas Squeeze Film Damping Potential for Megawatt Turbomachinery Rotor Applications, par Sidjou Nzali,Loïc Macaire
Été 2024 - En codirection avec : Hof, Lucas Abia
Future Gas Turbine Package Design Freeform Wood Fibre Composite Manufacturing, par Le Moulec,Yoann
Hiver 2024 - En codirection avec : Hof, Lucas Abia
Développement d'outils d'optimisation des stratégies intelligentes de cadenassage et décadenassage en contexte de production manufacturière, par Carlier,Florian
Automne 2024
- En codirection avec : Hof, Lucas Abia
Développement d'un procédé d'usinage électrochimique pour la mise en forme précise et agile de matériaux difficiles à usiner, par Villeneuve,Guillaume
Automne 2024 - En codirection avec : Bocher, Philippe
Étude numérique des hétérogénéités de déformation induites par des essais de compression uniaxiaux, par Villié,Loïc
Automne 2023 - En codirection avec : Hof, Lucas Abia
Electropolishing and its Surface Roughness Profile Prediction for Additive Manufactured Metal Parts, par Pourrahimi Seyghalani,Shamim
Automne 2024 - En codirection avec : Hof, Lucas Abia
Corrosion Quantification of Bolted Flanged Gasketed Joints, par Hakimian,Soroosh
Automne 2024 - En codirection avec : Hof, Lucas Abia
Towards Circular Manufacturing: Development of a Dynamic Sustainable Model for a Smart Closed-loop Manufacturing System, par Mejia Moncayo,Camilo
Automne 2024 - En codirection avec : Hof, Lucas Abia
Statégies optimales d'intégration du processus de cadenassage/décadenassage et de maintenance en production manufacturière intelligente : vers la Santé, Sécurité et Environnement (SSE) 4.0, par Delpla,Victor
Automne 2024 - En codirection avec : Hof, Lucas Abia
A Predictive Model for Glass Sheets State of Degradation, par Delbari,Seyed Ali
Été 2024 - En codirection avec : Jabbarzadeh, Armin
Sustainable and Resilient Supply Chain Network Design using Industry 4.0 Technologies: An Optimization Approach Towards a Circular Economy, par Aliahmadi,Seyed Zeinab
Automne 2024 - En codirection avec : Hof, Lucas Abia
Development of a Neural Network Including a Training Curriculum for Powder Coating on a High Diversity and Low Volume Production Line, par Brunet,Rafael
Été 2024 - En codirection avec : Hof, Lucas Abia
Influence of Additive Manufacturing Parameters on the Mechanical Strength of Repair Patches for Circular Manufacturing Strategies, par Chintalapalli,Arjun Chandra Shekar
Automne 2024 - En codirection avec : Hof, Lucas Abia
Development of a High Through-Put Antireflective Glass Patterning Process, par Cole,Douglas
Automne 2024
- En codirection avec : Hof, Lucas Abia
Étude de faisabilité technique portant sur la mise en service de la machine d'insertion des aubes rotatives, par Amadu Bah,Chernor Pampou
Hiver 2022 - En codirection avec : Nadeau, Sylvie
Désassemblage 4.0/5.0, par Grange,Mathieu
Hiver 2023
- En codirection avec : Hof, Lucas Abia
Recyclage de déchets textiles : maitrise du procédé et développement de nouveaux débouchés, par Kerriou,Raphaël
Été 2024
- En codirection avec : Hof, Lucas Abia
Outil de planification, par Pamen Heubo,Gaëtan Joël
Hiver 2020 - En codirection avec : Hof, Lucas Abia
Ingénieur en génie mécanique - Gestion de projets, par Bouche Noumbi,Emmanuel Jonathan
Hiver 2023 - En codirection avec : Hof, Lucas Abia
Intervention sur chantier de construction comme un conseiller en santé et sécurité, par Kihlou,Houssem
Hiver 2022
Publications
- L. A. Hof, R. Wuthrich. 2017 « Micro-/nanofabrication in the era of Industry 4.0 - Spark Assisted Chemical Engraving (SACE) - a versatile technology for glass machining and nanoparticle deposition ». Affiche présentée lors de la conférence : 1st National Conference : Converging on Nanomanufacturing : Innovation 360 (Montréal, QC, Canada, Sept. 25-26, 2017)
- L. A. Hof, J.D. Abou Ziki, R. Wuthrich. 2016 « Tool-glass bonding phenomenon during glass micro-machining by Spark Assisted Chemical Engraving (SACE) - Issues and opportunities ». Affiche présentée lors de la conférence : International Conference on Design and Production Engineering (Berlin, Germany, July 25-26, 2016)
- L. A. Hof, R. Wüthrich. 2016 « Electrochemical manufacturing processes to meet the demand of Industry 4.0 ». Affiche présentée lors de la conférence : Montreal Summit on Innovation - The Manufacturing Sector at the Conquest of the 4th Industrial Revolution (Montréal, QC, Canada, 24 nov. 2016)
- F. Charbonneau, L. A. Hof, D. J. Abou Ziki. 2015 « Gas film stability during Spark Assisted Chemical Engraving (SACE) ». Affiche présentée lors de la conférence : Colloque annuel Plasma-Québec 2015 (Montreal, QC, Canada, June 3-5, 2015)
- L. A. Hof, C. Escobedo, J.D. Abou Ziki, R. Wüthrich. 2015 « Additive Manufacturing (AM) through imprinting Gold nanoparticles on Glass Substrates by Spark Assisted Chemical Engraving (SACE) ». Affiche présentée lors de la conférence : 227th ECS Meeting (Chicago, IL, USA, May 24-28, 2015)
- M. M. Rahman, L. A. Hof, B. Johnston, S. A. Khanoki, D. Pasini, R. Wüthrich. 2015 « Electro-polishing of additive manufactured porous titanium for medical implants ». Affiche présentée lors de la conférence : 227th ECS Meeting (Chicago, IL, USA, May 24-28, 2015)
- K. Fujisaki, Ph. Couthy, R. Wüthrich, L. A. Hof, H. Bleuler. 2004 « Spark Assisted Chemical Engraving (SACE) in microfactory ». Affiche présentée lors de la conférence : Fourth International Workshop on Microfactories (Shanghai, China, Oct. 15-17, 2004)
- L. A. Hof, Rolf Wüthrich, Hannes Bleuler, Ph. Mandin. 2004 « Physical principles and miniaturization of Spark Assisted Chemical Engraving (SACE) ». Affiche présentée lors de la conférence : Fourth International Workshop on Microfactories (Shanghai, China, Oct. 15-17, 2004)
- Mathieu Grange, Sylvie Nadeau, Lucas Hof. 2022-11-02 « Disassembly 4.0/5.0 in the Automotive Industry ». Substance ÉTS
- Mathieu Grange, Sylvie Nadeau, Lucas Hof. 2022-11-02 « Désassemblage 4.0/5.0 : le cas de l’industrie automobile ». Substance ÉTS
- Seyed Ali Delbari, Lucas A. Hof. 2024 « Glass waste circular economy - Advancing to high-value glass sheets recovery using industry 4.0 and 5.0 technologies ». Journal of Cleaner Production vol. 462
- Nooshin Ghodsian, Khaled Benfriha, Adel Olabi, Varun Gopinath, Esma Talhi, Lucas Hof, Aurélien Arnou. 2024 « MSOA: A modular service-oriented architecture to integrate mobile manipulators as cyber-physical systems ». Journal of Intelligent Manufacturing
- Soorosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « An improved fixture to quantify corrosion in bolted flanged gasketed joints ». Journal of Pressure Vessel Technology vol. 146 , nº 1
- Soorosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « Effect of gap size on flange face corrosion ». Materials and Corrosion-Werkstoffe Und Korrosion
- Soorosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « Effect of gasket material on flange face corrosion ». International Journal of Pressure Vessels and Piping vol. 209
- Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2024 « Corrosion failures of flanged gasketed joints: A review ». Journal of Advanced Joining Processes vol. 9
- Camilo Mejía-Moncayo, Jean-Pierre Kenné, Lucas A. Hof. 2024 « A reconfigurable cellular remanufacturing architecture: A multi-objective design approach ». Journal of Remanufacturing
- Sylvie Nadeau, Ralph Bruder, Lucas A. Hof. 2024 « Utilisation de lunettes intelligentes dans l’assemblage/ désassemblage : État de l’art ». TD+ Votre travail durable vol. 0 , nº 1. p. 21-27
- Shamim Pourrahimi, Lucas A. Hof. 2024 « On the post-processing of complex additive manufactured metallic parts: A review ». Advanced Engineering Materials
- Douglas F. Cole, Ricardo J. Zednik, Lucas A. Hof. 2023 « High aspect ratio sapphire micromachining by ultraviolet laser-induced plasma-assisted ablation (LIPAA) ». International Journal of Applied Ceramic Technology vol. 20 , nº 5. p. 3279-3286
- Victor Delpla, Kevin Chapron, Jean-Pierre Kenné, Lucas A. Hof. 2023 « A novel approach for predicting Lockout/Tagout safety procedures for smart maintenance strategies ». International Journal of Production Research
- Victor Delpla, Jean-Pierre Kenné, Lucas A. Hof. 2023 « Integration of operational lockout/tagout in a joint production and maintenance policy of a smart production system ». International Journal of Production Economics vol. 263
- Chahine Ghimouz, Jean-Pierre Kenné, Lucas A. Hof. 2023 « On sustainable design and manufacturing for the footwear industry – Towards circular manufacturing ». Materials and Design vol. 233
- Nooshin Ghodsian, Khaled Benfriha, Adel Olabi, Varun Gopinath, Esma Talhi, Lucas A. Hof, Aurélien Arnou. 2023 « A framework to integrate mobile manipulators as cyber–physical systems into existing production systems in the context of industry 4.0 ». Robotics and Autonomous Systems vol. 169
- Soroosh Hakimian, Shamim Pourrahimi, Abdel-Hakim Bouzid, Lucas A. Hof. 2023 « Application of machine learning for the classification of corrosion behavior in different environments for material selection of stainless steels ». Computational Materials Science vol. 228
- Mohammad Maroufkhani, Soorosh Hakimian, Alireza Khodabandeh, Iulian Radu, Lucas A. Hof, Mohammad Jahazi. 2023 « Influence of oxygen content in the protective gas on pitting corrosion resistance of a 316l stainless steel weld joint ». Materials vol. 16 , nº 17
- Patrick Megoze Pongha, Jean-Pierre Kenné, Edgar De Jesus Garcia, Lucas A. Hof. 2023 « Optimal joint production, maintenance and product quality control policies for a continuously deteriorating manufacturing system ». International Journal of Modelling and Simulation vol. 43 , nº 3. p. 135-152
- Camilo Mejía-Moncayo, Jean-Pierre Kenné, Lucas A. Hof. 2023 « On the development of a smart architecture for a sustainable manufacturing-remanufacturing system: A literature review approach ». Computers and Industrial Engineering vol. 180
- Shamim Pourrahimi, Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2023 « On the use of machine learning algorithms to predict the corrosion behavior of stainless steels in lactic acid ». Metals vol. 13 , nº 8
- Guillaume Villeneuve, Lucas A. Hof. 2023 « On the use of the current signal in spark assisted chemical engraving for micromachining process control ». Precision Engineering vol. 83. p. 181-191
- Loïc Villié, Elodie Cabrol, Lucas Hof, Eric Feulvarch, Philippe Bocher. 2023 « Heterogeneities induced by uniaxial compression and resulting errors in material behavior assessment ». International Journal of Material Forming vol. 16 , nº 6
- Victor Delpla, Kevin Chapron, Jean-Pierre Kenne, Lucas Hof. 2022 « Towards intelligent manufacturing system safety strategies: generating LockOut/TagOut sheets by Machine Learning - a case study ». IFAC-PapersOnLine vol. 55 , nº 10. p. 1001-1006
- Victor Delpla, Jean-Pierre Kenné, Lucas A. Hof. 2022 « Circular manufacturing 4.0: Towards internet of things embedded closed-loop supply chains ». The International Journal of Advanced Manufacturing Technology vol. 118. p. 3241-3264
- Soroosh Hakimian, Lucas Hof, Hakim A. Bouzid. 2022 « Investigation of corrosion in bolted flanged joints using a novel experimental setup ». ECS Meeting Abstracts vol. MA2022-01 , nº 16. p. 990
- Camilo Mejia-Moncayo, Alix E. Rojas, Jean-Pierre Kenne, Lucas A. Hof. 2022 « An ant approach to define product families and remanufacturing cells ». IFAC-PapersOnLine vol. 55 , nº 10. p. 73-78
- Patrick Megoze Pongha, Guy-Richard Kibouka, Jean-Pierre Kenné, Lucas A. Hof. 2022 « Production, maintenance and quality inspection planning of a hybrid manufacturing/remanufacturing system under production rate-dependent deterioration ». International Journal of Advanced Manufacturing Technology vol. 121. p. 1289-1314
- Nicolas Vanderesse, Philippe Bocher, Natalia Nuño, Alejandro Yánez, Lucas A. Hof. 2022 « On the characterization of roughness and geometrical irregularities of additively manufactured single titanium-alloy struts ». Additive Manufacturing vol. 54
- Panteha Fallah, Lucas A. Hof, Rolf Wuthrich. 2021 « Fabrication of high-thickness and low surface roughness metal parts by a hybrid electrochemical manufacturing process ». Advances in Industrial and Manufacturing Engineering vol. 2
- Lucas Abia Hof, Rolf Wuthrich. 2021 « Glass precision micro-cutting using spark assisted chemical engraving ». Advances in Industrial and Manufacturing Engineering vol. 3
- S. Nadeau, R. Bruder, L. Hof. 2021 « Using Smart Glasses in assembly/disassembly: Current state of the art ». Travail et Santé vol. 37 , nº 2. p. 2-6
- Jacopo Profili, Rafael Brunet, Émilie L. Dubois, Vincent Groenhuis, Lucas A. Hof. 2021 « Use of 3D printed connectors to redesign full face snorkeling masks in the COVID-19 era: A preliminary technical case-study ». Annals of 3D Printed Medicine vol. 3
- Jacopo Profili, Emilie L. Dubois, Dimitrios Karakitsos, Lucas A. Hof. 2021 « Overview of the user experience for snorkeling mask designs during the COVID-19 pandemic ». Healthcare vol. 9 , nº 2
- Zahra Chaghazardi, Lucas Hof, Rolf Wuthrich. 2020 « Electropolishing of inside surfaces of stainless steel tubing ». ECS Transactions vol. 97 , nº 7. p. 523-536
- Pantea Koushki, Tsz-Ho Kwok, Lucas Hof, Rolf Wuthrich. 2020 « Reinforcing silicone with hemp fiber for additive manufacturing ». Composites Science and Technology vol. 194. p. 141-151
- Rolf Wuthrich, Lucas A. Hof. 2019 « Low batch size production of glass products requiring micrometer precision ». IFAC-PapersOnLine vol. 52 , nº 10. p. 319-322
- Lucas A. Hof, Rolf Wuthrich. 2018 « Industry 4.0 Towards fabrication of mass-personalized parts on glass by Spark Assisted Chemical Engraving (SACE) ». Manufacturing Letters vol. 15. p. 76-80
- Lucas A. Hof, Rolf Wüthrich. 2018 « Rapid prototyping of packaged glass devices: Eliminating a process step in the manufacturing workflow from micromachining to die singularizing ». Manufacturing Letters vol. 17. p. 9-13
- Lucas A. Hof, Md Masiar Rahman, Rolf Wuthrich. 2017 « Using Taylor vortices to create a film of nanoparticles for dip-coating ». Manufacturing Letters vol. 13. p. 21-24
- Lucas A. Hof, Jana Abou Ziki. 2017 « Micro-hole drilling on glass substrates-A review ». Micromachines vol. 8 , nº 2
- Lucas Abia Hof, Xin Guo, Minseok Seo, Rolf Wuthrich, Jesse Greener. 2017 « Glass imprint templates by spark assisted chemical engraving for microfabrication by hot embossing ». Micromachines vol. 8 , nº 1
- Jana D. Abou Ziki, Lucas A. Hof, Rolf Wuthrich. 2015 « The machining temperature during Spark Assisted Chemical Engraving of glass ». Manufacturing Letters vol. 3. p. 9-13
- R. Wuthrich, L. A. Hof. 2006 « The gas film in spark assisted chemical engraving (SACE) - A key element for micro-machining applications ». International Journal of Machine Tools and Manufacture vol. 46 , nº 7-8. p. 828-835
- R. Wuthrich, K. Fujisaki, P. Couthy, L. A. Hof, H. Bleuler. 2005 « Spark assisted chemical engraving (SACE) in microfactory ». Journal of Micromechanics and Microengineering vol. 15 , nº 10. p. 276-280
- R. Wuthrich, L. A. Hof, A. Lal, K. Fujisaki, H. Bleuler, P. Mandin, G. Picard. 2005 « Physical principles and miniaturization of Spark Assisted Chemical Engraving (SACE) ». Journal of Micromechanics and Microengineering vol. 15 , nº 10. p. 268-275
- Lucas Hof. 2021 « Cirdular Manufacturing 4.0 ». In 2021 World Manufacturing Report: Digitally Enabled Circular Manufacturing. p. 19. World Manufacturing Foundation
- Sylvie Nadeau, Antoine Tahan, Jean-Pierre Kenné, Lucas A. Hof. 2024 « Le désassemblage de produits : enjeux et perspectives ». Communication lors de la conférence : 44e congrès de l’AQHSST : Fragilisation de la prévention au travail dans un contexte de pénurie : Défis et solutions (Valleyfield, QC, Canada, 22-24 mai 2024)
- Soorosh Hakimian, Hakim A. Bouzid, Lucas Hof. 2022 « A study on the influence of operational factors on the flange face corrosion using a novel experimental test bench ». Communication lors de la conférence : ASME Bolted Joint Reliability Symposium (Houston, TX, USA, Oct. 26-27, 2022)
- S. Nadeau, L. Hof, K. Landau. 2022 « Les systèmes d'assistance numérique au service de la diversité ». Communication lors de la conférence : Congrès de l'AQHSST (Sherbrooke, QC, Canada, 11-13 mai 2022)
- Lucas Hof. 2021 « Digital entreprises - a new educative learning program for students and professionals ». Communication lors de la conférence : Mardi 4.0 - seminar series "Reseau Innovation 4.0 Network" (Montréal, QC, Canada, )
- L. A. Hof, R. Wüthrich, T. Kwok. 2018 « Industry 4.0 and its impact on aviation ». Communication lors de la conférence : John Molson School of Business, John Molson Executive Centre, Client: Xiamen Air (Montreal, QC, Canada, May 15, 2018)
- L. A. Hof, R. Wüthrich, T. Kwok. 2018 « Industry 4.0 – what lies ahead for manufacturing in the Sector? ». Communication lors de la conférence : John Molson School of Business, John Molson Executive Centre & HEC Paris (Montreal, QC, Canada, May 10, 2018)
- Lucas A. Hof. 2018 « Indirect additive manufacturing and multiscale post-processing for fabrication of complex, high precision metal parts ». Communication lors de la conférence : RAPID + TCT 2018 Event and Conference (Fort Worth, TX, USA, Apr. 23-26, 2018)
- Lucas Abia Hof, Rolf Wüthrich. 2018 « Electrochemical manufacturing to support industry 4.0 – Spark Assisted Chemical Engraving (SACE) ». Communication lors de la conférence : AiMES 2018 - ECS and SMEQ Joint International Meeting (Cancun, Mexico, Sept. 30-Oct. 4, 2018)
- L. A. Hof, R. Wüthrich. 2017 « Electrochemistry 4.0 ». Communication lors de la conférence : 231st Electrochemical Society Meeting (ECS) (New Orleans, LA, USA, May 28 - June 01, 2017)
- Lucas Hof, Rolf Wuthrich. 2017 « Multiscale post-processing of metal additive manufactured parts by electro-polishing technology ». Communication lors de la conférence : RAPID + TCT 2017 Event and Conference (Pittsburgh, PA, USA, May 08-11, 2017)
- D. Singh, L. A. Hof, R. Wuthrich. 2017 « Micro and nano 3D Feature deposition using localized electrochemical deposition ». Communication lors de la conférence : 1st National Conference : Converging on Nanomanufacturing : Innovation 360 (Montréal, QC, Canada, Sept. 25-26, 2017)
- L. A. Hof, C. Goyer, R. Wüthrich. 2016 « Microstructuring of glass by spark assisted chemical engraving (SACE) ». Communication lors de la conférence : International Conference on Design and Production Engineering (Berlin, Germany, July 25-26, 2016)
- L. A. Hof, B. Presley, D. VanTran, R. Wüthrich. 2016 « Spark Assistant Chemical Engraving (SACE) – an innovative tool for the microfluidic community ». Communication lors de la conférence : FluidicMEMS : HiFi Bio (Boston, MA, USA, Oct. 26, 2016)
- L. A. Hof, M. M. Rahman, R. Wuthrich. 2016 « Multiscale post-processing of metal additive manufactured parts by electro-polishing technology ». Communication lors de la conférence : Salon de la Technologie de Fabrication de Montréal (STFM) (Montréal, QC, Canada, 15-18 mai 2016)
- L. A. Hof, R. Wüthrich. 2016 « Electrochemical processes to meet the needs of industry 4.0 ». Communication lors de la conférence : Forum Industriel CREPEC (Montréal, QC, Canada, 20 oct. 2016)
- L. A. Hof, R. Wüthrich. 2016 « The digital engineer - New challenges for the Canadian Universities ». Communication lors de la conférence : Advanced Manufacturing Canada (AMC) 2016 (Toronto, ON, Canada, Nov. 02-03, 2016)
- L. A. Hof, F. Charbonneau, D. J. Abou Ziki. 2015 « Glass micromachining by Spark Assisted Chemical Engraving (SACE) ». Communication lors de la conférence : Colloque annuel Plasma-Québec 2015 (Montreal, QC, Canada, June 3-5, 2015)
- L. A. Hof, F. Charbonneau, R. Wüthrich. 2015 « Spark Assisted Chemical Engraving (SACE) - a versatile micro machining technology for microfluidic devices ». Communication lors de la conférence : 98th Canadian Chemistry Conference and Exhibition (Ottawa, Canada, June 13-17, 2015)
- Emmanuel Jonathan Bouche Noumbi, Lucas Hof, Sylvie Nadeau. 2024 « Design of a manufacturing system using the customer journey mapping method: hybrid solar panel assembly (Manual-Automated-5.0), ». Congrès IISE 2024 = IISE Annual Conference & Expo 2024 (Montreal, QC, Canada, May 18-21, 2024)
- Soroosh Hakimian, Abdel-Hakim Bouzid, Lucas A. Hof. 2023 « The effects of fluid working conditions on flange face corrosion ». Proceedings of the ASME Pressure Vessels & Piping Conference (Atlanta, GA, USA, July 16-21, 2023) American Society of Mechanical Engineers (ASME)
- D. E. Ondze Gazani, S. Nadeau, L. Hof. 2023 « Mise en service des lunettes intelligentes pour l’assemblage ou le désassemblage ». 43e congrès de l’AQHSST (Trois-Rivières, QC, Canada, 10-12 mai 2023)
- Erika Villalobos, Tasseda Boukherroub, Lucas Hof, Neila El-Asli. 2023 « Economic feasibility analysis of a medical mask closed-loop supply chain: A Canadian case study ». CIGI Qualita MOSIM : Propulser la performance - Interconnectivité et collaboration dans un contexte d'intelligence artificielle (Trois-Rivières, QC, Canada, June 14-16, 2023)
- Soroosh Hakimian, Lucas A. Hof, Hakim A. Bouzid. 2022 « An improved fixture to quantify corrosion in bolted flanged gasketed joints subjected to service conditions ». ASME Pressure Vessels & Piping Conference (Las Vegas, Nevada, USA, July 17-22, 2022) American Society of Mechanical Engineers (ASME)
- Victor Delpla, Jean-Pierre Kenné, Ameth Maloum Fall, Mahan Balalpour, Lucas A. Hof. 2021 « Metal scrap recycling 4.0: Towards smart operation and production of high-quality alloys ». Canadian Society for Mechanical Engineering International Congress (2021) (Charlottetown, PE, Canada, June 28-30, 2021) University of Prince Edward Island. Robertson Library
- Jean-Philippe Leclair, Newton Borges, Duncan Cree, Lucas A. Hof. 2021 « Towards circular manufacturing: Repurposing eggshell waste as filler for poly lactic acid feedstock for 3D printing ». Canadian Society for Mechanical Engineering International Congress (2021) (Charlottetown, PE, Canada, June 28-30, 2021) University of Prince Edward Island. Robertson Library
- Camilo Mejía-Moncayo, Jean-Pierre Kenné, Lucas A. Hof. 2021 « A hybrid architecture for a reconfigurable cellular remanufacturing system ». Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems : IFIP WG 5.7 International Conference on Advances in Production Management Systems, APMS 2021, Proceedings, Part I (Nantes, France, Sept. 05-09, 2021) Springer
- Victor Delpla, Lucas A. Hof, Jean-Pierre Kenné. 2020 « Closed loop supply chain optimization for Circular Manufacturing using Industry 4.0 technologies ». 8th International Conference on Information Systems, Logistics and Supply Chain: Interconnected Supply Chains in an Era of Innovation (ILS) (Austin, TX, USA, Apr. 22-24, 2020) International Conference on Information Systems, Logistics and Supply Chain
- Lucas A. Hof, Deependra Singh, Panteha Fallah, Rolf Wüthrich. 2018 « High precision electrochemical manufacturing processes to meet the demand of Industry 4.0 ». 18th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2018) (Venice, Italy, June 04-08, 2018) Euspen
- Lucas A. Hof, Rolf Wuthrich. 2018 « Glass micro-cutting by Spark Assisted Chemical Engraving ». 2018 CSME International Congress (Toronto, ON, Canada, May 27-30, 2018) CSME
- Lucas Abia Hof, Rolf Wüthrich. 2018 « Electrochemical manufacturing to support industry 4.0 – Spark Assisted Chemical Engraving (SACE) ». Americas International Meeting on Electrochemistry and Solid State Science 2018 (AiMES 2018) (Cancun, Mexico, Sept. 30 - Oct. 04, 2018) Electrochemical Society
- Panteha Fallah, Lucas A. Hof, Rolf Wüthrich. 2017 « Electroforming of non-conductive 3D printed parts ». Proceedings of the 26th Canadian Congress of Applied Mechanics (CANCAM 2017) (Victoria, BC, Canada, May 29 - June 01, 2017) Canadian Congress of Applied Mechanics
- L. A. Hof, L. Heinrich, R. Wuthrich. 2017 « Towards high precision manufacturing of glass tools by Spark Assisted Chemical Engraving (SACE) for micro forming techniques ». 2017 World Congress on Micro and Nano Manufacturing (WCMNM) : A Joint Conference of ICOMM/4M/IFMM (Kaohsiung City, Taiwan, Mar. 27-30, 2017)
- Lucas Hof, Rolf Wuthrich. 2017 « Multiscale post-processing of metal additive manufactured parts by electro-polishing technology ». RAPID + TCT 2017 Event and Conference (Pittsburgh, PA, USA, May 08-11, 2017) SME
- L. A. Hof, R. Wuthrich. 2016 « Industry 4.0 – towards fabrication of ultra-customized parts on glass by Spark Assisted Chemical Engraving (SACE) ». Proceedings of the Canadian Society for Mechanical Engineering International Congress 2016 (Kelowna, BC, Canada, June 26-29, 2016)
- Lucas Abia Hof, Frederic Charbonneau, Diana Consuelo Rodriguez Burbano, Ana Maria Ibarra-Ruiz, John A. Capobianco, Rolf Wuthrich. 2016 « Spark Assisted Chemical Engraving (SACE) – from subtractive to additive manufacturing technology ». 11th International Conference on Micromanufacturing (ICOMM 2016) (Orange County, CA, USA, Mar. 29-31, 2016)
- Lucas Abia Hof, Md Masiar Rahman, Rolf Wüthrich. 2016 « Multiscale post-processing of metal additive manufactured parts by electro-polishing technology ». 16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016) (Nottingham, UK, May 30 - June 03, 2016) Euspen
- Lucas Hof, Patrick Thibaut, Rolf Wüthrich. 2016 « Spark Assisted Chemical Engraving (SACE) – an innovative technology with high potential for industry ». 16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016) (Nottingham, UK, May 30 - June 03, 2016) Euspen
- Lucas Hof, Rolf Wüthrich. 2016 « Micromachining glass with in situ fabricated micro-tools ». 16th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN 2016) (Nottingham, UK, May 30 - June 03, 2016) Euspen
- M. M. Rahman, L. A. Hof, R. Wuthrich. 2016 « Multiscale electropolishing of additive manufactured and standard grade titanium alloys by pulsed voltages ». Proceedings of the Canadian Society for Mechanical Engineering International Congress 2016 (Kelowna, BC, Canada, June 26-29, 2016)
- R. Wuthrich, L. A. Hof. 2016 « Electrochemical processes to meet the needs of industry 4.0 ». Proceedings of the Canadian Society for Mechanical Engineering International Congress 2016 (Kelowna, BC, Canada, June 26-29, 2016)
- R. Wüthrich, J.D. Abou Ziki, L. A. Hof, P. Matoorian, G. Cusanelli, D. Lüthi. 2014 « Glass micro-machining by contact glow discharge electrolysis ». 65th Annual Meeting of the International Society of Electrochemistry (Lausanne, Switzerland, Aug. 31 - Sept. 05, 2014)
- L. A. Hof, A. Lal, K. Fujisaki, R. Wüthrich, H. Langen, H. Bleuler. 2004 « 3D Micro structuring of glass with an AFM ». Proceedints of the EUSPEN International Conference, 2004 (Glasgow, Scotland, UK, May 31 - June 02, 2004) LG Digital
- Fatima Bannout, Enora Barrau, Julien Beaulieu, Nicolas Biron, Jocelyn Bleriot, Isabelle Dabadie, Anaïs Del Bono, Samantha Gagnonmtz, Mathias Glaus, Markus Herrmann, Lucas Hof, Marc Journeault, Rim Khlifa, Valérie Laforest, Annie Levasseur, Muriel Maillefert, Nelson Manjong, Mireille Matt, Michelle Mongo, Rémi Morin Chansse, Daniel Normandin, Sophie Peillon, Emmanuel Raufflet, Marleine Semaan, Audrey Tanguy, André Torre, Jocelyne Tsonang, Hervé Vaillant, Edouard Yao, Lydie Yiougo. 2024 « Économie circulaire en Afrique francophone : enjeux et défis ». : Institut de la Francophonie pour le développement durable (IFDD). 252 p.
- Maroua Raya, Ali Aidibe, Sylvie Nadeau, Lucas Hof, Hany Moustapha. 2023 « Livre blanc Réseau SDG Innovation: Au delà de l’industrie 4.0/5.0 : Vers une société Smart Digital Green ». 60 p.
- Lucas Abia Hof. 2018 « High-precision micro-machining of glass for mass-personalization ». Thèse de doctorat. Montreal, Concordia University.
November 22, 2023
Machine Learning for stainless steel selection on corrosion resistance
June 27, 2023